SYD-3536 -1 Cleveland Open-Cup Flash Point Tester
- It adopts technology of single chip microcomputer and LCD screen. English man-machine interface.Th
- The LCD screen has prompt menu, prompt type input for operation interface. It shows set parameters a
- It is newly design,having small structure. Stainless steel working table make it elegant and beautif
- It is equipped with wind-shelter and flame extinguishing cover which are accord with requirements of
- Operator only need to observe the flash point appearing. The cost performance is high.
Details: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed
This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79 and below 400 except fuel oils.
1. Power supply: AC（220±10%）V, 50Hz
. 2. Heating device: Electric furnace heating, no naked fire, explosion prevented.The power is adjustable from 0W to 600W. The max heating temperature can reach 400
. 3. Temperature control: Single chip microcomputer.The heating rate can meet requirements of standards GB/T 3536-2008 and ASTM D92.
4. Temperature display: LCD screen shows temperature parameters. The range is 0 400 , accuracy is 0.1 .
5. Flash point detecting device: scanning the flash point automatically.
6. Temperature sensor: RTD, PT100
7. Igniting device: (1) Ignition source: coal gas (or civil gas,the same below) (2) Flame diameter is 3.2mm 4.8mm
8. Ambient temperature: (-10～50)℃
9. Relative humidity: ≤85%
10.Maximum power consumption: 650W
11.Dimension: 340mm*320mm*450mm(Temperature sensor is included)
we will send the product to you as soon as possible
If you have any questions , please feel free to contact us