Precisetool KIT1024 TOOL KIT (YJQ-W2A Crimper Crimping Tool & G125 Gage & TH1A Turret Head & TH163 Turret Head & UH2-5 Adjustable Positioner)
Precisetool KIT1024 TOOL KIT (YJQ-W2A Crimper Crimping Tool & G125 Gage & TH1A Turret Head & TH163 Turret Head & UH2-5 Adjustable Positioner)
Precisetool KIT1024 TOOL KIT (YJQ-W2A Crimper Crimping Tool & G125 Gage & TH1A Turret Head & TH163 Turret Head & UH2-5 Adjustable Positioner)

Precisetool KIT1024 TOOL KIT (YJQ-W2A Crimper Crimping Tool & G125 Gage & TH1A Turret Head & TH163 Turret Head & UH2-5 Adjustable Positioner)

Regular price $339.00 Sale

Brand: PRECISETOOL-Hand Crimp tools

Features:

  • YJQ-W2A Crimp Tool Frame(AF8) 12-26AWG
  • G125 GO-NOGO Gage
  • TH1A Turret Head & TH163 Turret Head
  • UH2-5 Adjustable Positioner
  • Please note: This tool is designed according to MIL-SPEC and manufactured by PRECISETOOL. NOT IN QPL & NOT DMC TOOLS.

Publisher: PRECISETOOL

Details: YJQ-W2A

Has limitless application within the specified wire range of 12-16 AWG
Positioners adapt the tool frame to specific military or proprietary contact combination
The YJQ-W2A gives an 8 impression crimp, which assures maximum tensile strength
Crimp depth can be adjusted by an 8 position selector knob conveniently located on the tool frame
Often used in military institutions, aviation companies and electronic connector companies, for example: Deutsch, Amphenol, Lemo and so on
The precision ratchet controls cycling of the tool in both directions of handle movement which assures the same accurate crimp every time

TH1A

Weight: 0.25 lb
Adjustable turret crimper positioner
Gives a standardized and accurate crimp every time
A dataplate affixed to turret head lists specific contact part numbers, the corresponding position color code, and suggested selector depth settings for the wire size being used

TH163

Weight: 0.25 lb
Can be adjusted to match the diameter of the connectors and the wires desired

UH2-5

Weight: 0.15 lb
Can be easily mated to the crimping tool frame
Adapt the tool frame to specific military or proprietary contact combination
The screw can be secured with the locknut provided
The selected contact is inserted through the entry hole on the opposite side of the tool frame from the head
The height adjusting screw is rotated until the contact is in the proper position for crimping

G125

GO: 0.039 inch
NO-GO: 0.044 inch
Set the tool selector knob to position4, and check indenter closure with the gage
Periodic gaging is recommended to insure accurate calibration

PLEASE NOTE: JRready and Precisetool are the only two authorized store on Amazon.

EAN: 6905208000804