PepeTools Ultra Power Electric Double Rolling Mills Wire and Flat 130mm, MADE IN THE USA
Brand: Ultra Combo Wire Mill and Flat Mill
Two Powered Rolling Mills 130mm wide X 65mm Diameter; Mirror" finished and induction hardened to 60-62 HRC Nominal torque output 2880 Inch-Lb (33 Kg/m)
MAXIMUM ROLLER OPENING: 0-7.5mm; Rolling Mill Body is one-piece precision cast construction for ULTRA strength and durability; Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty
Flat Rolling Mill: Rollers 130mm wide X 65mm Diameter
Wire Rolling Mill Rollers: SQUARE: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5; ROUND: 2.0, 3.0, 4.0, 5.0, 6.0 COMFORT FIT: 8 x 2.25; 7 x 2.25; 6 x 2.0; 5 x 2.0; 4 x 1.25; ELLIPSE: 2.50 x 1 and 3.0 x 1.25 and 4.0 x 1.50
Overload protection; Under voltage / Overvoltage Protection; Short Circuit Protection, phase to phase; Electronic Inrush Current Limit (EICLTM) Protection
Details: MAXIMUM ROLLER OPENING: 0-7.5mm SQUARE WIRE (mm): 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 ROUND WIRE (mm): 2.0, 3.0, 4.0, 5.0, 6.0 COMFORTABLE FIT (wide x height in mm): 8 x 2.25; 7 x 2.25; 6 x 2.0; 5 x 2.0; 4 x 1.25 ELLIPSE (HALF-ROUND) mm: 2.50 x 1 and 3.0 x 1.25 and 4.0 x 1.50 PEPE ULTRA MILLS are designed for cold rolling of nonferrous metals to produce uniform thickness and bright finish. You will be able to reduce thickness (gauges) of sheet metal and wire. Transfer textures to your metal, and many other related tasks. The "T" bar at the top of the Rolling Mill used to open or close the rollers. When completely closed the rollers, should measure "true" cylindrically. This means they should touch with no visible gaps. Should there ever be a gap, meaning the rollers are not "true", simply remove the two small screws holding the "T" bar cover , pull the "T" bar handle off and turn the large gears to move the roller(s) down until there is no visible gap, making them "true", then re-install the "T" bar and cover. To roll metal: Open the rollers to accept the metal and close the rollers around the metal using the "T" bar until the rollers touch and hold the metal. Set the indicator dials on the large gears to "0" (zero), Indicator Dials are on the top of each Rolling Mill. Turn on the Power Mill and Select Forward. Select Speed at which the Roller moves with the Center Dial (0-100). Tests pass the metal through. Once the test pass been completed, you will want to turn the "T" bar clockwise one quarter of the space between the markings on top of the gears, any greater distance could damage the mill. Continue to pass the metal through the rollers until the desired thickness is achieved.