MeterTo 3 inch Screen Portable Leeb Hardness Tester UL370 HLD 170--960 HRB, HRC, HV, HB, HS, HL, HRA 600 Storage Auto Printing Inside USB PC Software
- It is the 3 inch highest and largest brightness display showing all functions and parameters, easy read Largest screen Oled screen and operate;
- Test at any angle, even upside down;
- Rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing);
- Original imported high speed thermal printer support the immediate printing function. It can save data permanently;
- USB port with the PC humanity multi-functions data proceeding software.
Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
Seven impact devices are available for special application. Automatically identify the type of impact devices.
Large capacity memory could store 600 groups (Relative to average times32-1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
User calibration function.
Die cavity of molds
Bearings and other parts
Failure analysis of pressure vessel, steam generator and other equipment
Heavy work piece
The installed machinery and permanently assembled parts
Testing surface of a small hollow space
Material identification in the warehouse of metallic materials
Rapid testing in large range and multi-measuring areas for large-scale work piece
Measuring range: 170--960HLD
Measuring direction: 360°
Accuracy: +/- 6 HLD
Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
Display: 3 inch screen
Data memory: 600 groups max.relative to impact times 32-1
Printing paper: width 57.5±0.5mm, diameter is 30mm
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period: about 150 hours. With backlight off, no printing
Communication interface: USB1.1
D type impact device*1pcs With cable
Standard test block*1pcs
Cleaning brush (I)*1pcs
Small support ring*1pcs
Battery Charger*1pcs 9V 500mA
Paper for printing*1pcs
Cable with CD*1pcs