ETCR2000C+ Handheld Ground Resistance Tester with Resistance Range 0.01 to 200 Ohm Current Range 0.00mA to 20.0A Digital Clamp Earth Resistance Measuring Meter with LCD Display
◆ Protection Level: Dual Insulation;Resistance Range:0.01-1200Ω; Current Range: 0.00mA~20.0A; Resistance Resolution:0.001Ω; Current Resolution: 0.05mA
◆ Structural Feature: Clamp CT, Liquid crystal display: 4 bit LCD digital display;Alarm Threshold Setting Range:Resistance: 1-199Ω
◆ Easy operation and good stability,less power consumption,Power Consumption: Max 50mA either in booting up or normally working, Continuously working for 30 hours
◆ Alarm Sound and Light: "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.Auto Power-off: 5 minutes after Boot up
◆ ETCR clip on earth resistance tester can test not be measured by traditional methods of grounding fault, can be applied to the traditional method to measure the occasion, grounding resistance measurement and is widely used in all kinds of equipment.
Details:Shipping Policy :Battery and Liquid not Included During the Shipping Technical Specifications * Function:Ground resistance test, Loop resistance test * Clamp Size: 65mm×32mm * Liquid crystal display: 4 bit LCD digital display, 47mm(L) x 28.5mm(W) * Resistance Range: 0.01-1200Ω; Current Range: 0.00mA~20.0A * Resistance Resolution:0.001Ω; Current Resolution: 0.05mA * Highest Resistance Accuracy:±1%±0.01Ω; Highest Current Accuracy: ±2.5%±1mA * Data memory:99 Sets * Auto Power-off: 5 minutes after Boot up * Power Consumption: Max 50mA either in booting up or normally working, Continuously working for 30 hours * Working Temperature and Humidity: -20℃-55℃;20%RH-90%RH * Alarm Threshold Setting Range:Resistance: 1-199Ω * Alarm Sound and Light: "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. * Interference Signal Recognition: "Beep-beep-beep" tone, NOISE symbol blinking * Protection Level: Dual Insulation * Structural Feature: Clamp CT * Shifting: Automatic shifting * External magnetic field: <40A/m * External electrical field: <1V/m * Single measurement time: 0.5 second * Resistance measurement frequency: >1KHz * Measured current frequency: 50/60Hz Automatic measurement * Low Battery Indication: Low battery symbol displays when battery is lower then 5.3V * Memory Full Indication: MEM symbol blinks when all 99 sets memory is full * Over Range Indication: Out of range indication "OLΩ", "L0.01" or "OL A" * Clamp Dimension: L×W×T: 285mm×85mm×56mm * Tester Weight: 1160g * Power Supply: 4 PCS of LR6 lkaline batteries（Battery not included in the package） * Standard Accessories: Meter:, Test Ring, Suitcase, manual * Optional Accessories: RS232 Interface If you need Optional Accessories,Please contact us.