8-direction mill w/ 14" base (inch)
8-direction mill w/ 14" base (inch)

8-direction mill w/ 14" base (inch)

Regular price $1,135.00 Sale

Brand: Sherline


  • X axis Travel = 8, Y axis travel = 7, Z axis travel = 6.25
  • Laser engraved measurement reference scales on table and base
  • Adjustable zero handwheels on all three axes
  • 1/4 Jacobs drill chuck and drawbolt included
  • Column adjusts in multiple directions for drilling or milling compound angles

Publisher: Sherline Products Inc.

Details: The deluxe 8-direction milling machine offers the most versatility of any Sherline mill. In addition to X-axis, Y-axis and Z-axis travels, there are five additional directions that the headstock spindle can be positioned to do drilling or milling on your part from virtually any angle. The headstock can pivot up to 90° in either direction. The column bed can be rotated side-to-side up to 90° in either direction for angled drilling. A special knuckle allows the column to be pivoted front to rear. The "ram" design of the column base also allows the entire ram to be pivoted up to 90° side-to-side. Loosening the column cap allows the ram to be moved in and out with over 5.5″ of travel. With this many directions of movement, the machining possibilities are virtually limitless withing the size capabilities of the machine. The 14″ long base also increases Y-axis travel by an additional 2″ compared to the Model 5400 mill. This is the mill for those who want to take their miniature machining abilities to the extremes. Standard equipment for the model 2000 (2010 metric) mill includes: A powerful 90 VDC motor with electronic speed controller 14″ base 2-1/2″ (63mm) adjustable "zero" handwheel on the Z-axis and 2″ (51mm) adjustable "zero" handwheels on the X- and Y-axes 2.75″ (70 mm) x 13.0″ (330 mm) table with two T-slots 3072 ¼" Jacobs drill chuck w/ key, #1 Morse arbor with drawbolt 2″ column riser block Laser-engraved scales on the base and table Pulleys, drive belt, three hexagonal keys, spindle bars, gib removal tool, eight-foot three-wire power cord, and instruction manual Available with red handwheels upon request New Mill Features Oil reservoirs on the X/Y axes and the Z axis to help keep critical parts lubricated. These were initially developed for CNC machines that run constantly for hours on end but can benefit manual machines as well Brass leadscrew cover that keeps chips off the rear of the Y-axis leadscrew

UPC: 608729752684

EAN: 0608729752684