XML Feed3 https://jumboindustrial.com Mitutoyo 342-362-30 CPM30-2 MX Point Micrometer, IP65, 30 Degree, 1"-2", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-342-362-30-cpm30-2-mx-point-micrometer-ip65-30-degree-1-2-0-00005-0-001-mm Brand: MitutoyoFeatures: Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions20 degree and 30 degree measuring points are availableIP65 water/dust protectionThe measuring points have approximately 0.3mm / .012" radiusPublisher: MitutoyoDetails: Mitutoyo 342-362-30 CPM30-2"MX, Micrometer, Point, 30°, 1-2",.00005"/0.001 mm, IP65.EAN: 4946368689135 shopify_US_849845583919 new 481.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ft6c4mFsL_grande.jpg?v=1528151808 Mitutoyo Dimensional Measurement yes 4946368689135 0.0 kg Mitutoyo 389-251 Sheet Metal LCD Micrometer, Ratchet Stop, 0-25mm Range, 0.001mm Graduation, +/-0.004mm Accuracy https://jumboindustrial.com/products/mitutoyo-389-251-sheet-metal-lcd-micrometer-ratchet-stop-0-25mm-range-0-001mm-graduation-0-004mm-accuracy Brand: MitutoyoFeatures: Deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber partsDigital, single-value readout LCD displays in metric units for readabilityStatistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately)Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementsRated IP65 for resistance to penetration by dust and liquid up to the force of a low-pressure water jetPublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 389 series sheet metal LCD micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a single-value LCD readout that displays in metric units with resolution to 0.001mm. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewton... shopify_US_849845026863 new 611.07 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41r0J-klTAL_grande.jpg?v=1528151809 Mitutoyo Dimensional Measurement yes 4946368499680 0.0 kg E-RX30B https://jumboindustrial.com/products/e-rx30b Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126961626 shopify_US_849842765871 new 1,047.20 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31yw34TTTrL_grande.jpg?v=1528151810 KANON (Nakamura MFG) Dimensional Measurement yes 4582126961626 0.0 kg Starrett 683-1Z Inch Reading Internal Chamfer Gauge, 0-90 Degree Angle, 0-3/8" Range https://jumboindustrial.com/products/starrett-683-1z-inch-reading-internal-chamfer-gauge-0-90-degree-angle-0-3-8-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designInternal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659636840EAN: 0049659636840 shopify_US_849842602031 new 474.17 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41BOtBvk5_2BL_grande.jpg?v=1528151811 Starrett Dimensional Measurement yes 049659636840 0.0 kg Starrett 683M-1Z Millimeter Reading Internal Chamfer Gauge With Yellow Dial, 0-90 Degree Angle, 0-9.5mm Range https://jumboindustrial.com/products/starrett-683m-1z-millimeter-reading-internal-chamfer-gauge-with-yellow-dial-0-90-degree-angle-0-9-5mm-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designInternal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettDetails: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659649895EAN: 0049659649895 shopify_US_849841913903 new 491.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41hmJy-LNGL_grande.jpg?v=1528151811 Starrett Dimensional Measurement yes 049659649895 0.0 kg 4Pc. Optical Parallel Set .5000"-.506 https://jumboindustrial.com/products/4pc-optical-parallel-set-5000-506 Brand: MitutoyoPublisher: MITUTOYODetails: Mitutoyo 157-901 4pc. Optical Parallel Set .5000"-.506UPC: 603908084280EAN: 0603908084280 shopify_US_849841782831 new 824.90 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31fGusiTuNL_grande.jpg?v=1528151811 Mitutoyo Dimensional Measurement yes 603908084280 0.0 kg Starrett 450-12 Dial Depth Gage https://jumboindustrial.com/products/starrett-450-12-dial-depth-gage Brand: StarrettFeatures: Measurement range of 0 to 12" and resolution of 0.001"White face dial displays in U.S/metric, 0 to 100 dial readingHardened stainless steel for durability and accurate measurementsKnurled nut holds gauge securelyOptional base extensions of 7" and 12" are available to increase base span (sold separately)Publisher: StarrettDetails: Starrett 450-12 DIAL DEPTH GAGE- 0-12"UPC: 049659567687EAN: 0049659567687 shopify_US_849841258543 new 509.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21s01OdTGzL_grande.jpg?v=1528151813 Starrett Dimensional Measurement yes 049659567687 0.0 kg Haimer 80.365.30.FHN Universal FH 3D Sensor with Integrated Taper BT 30, Neutral Model https://jumboindustrial.com/products/haimer-80-365-30-fhn-universal-fh-3d-sensor-with-integrated-taper-bt-30-neutral-model Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095725 shopify_US_849841127471 new 540.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BtFICoa0L_1955e0f0-2960-4f26-b6ff-feee8787bfdd_grande.jpg?v=1528151813 Haimer Dimensional Measurement yes 4034221095725 0.0 kg Starrett 1015A-6 Inch Reading Portable Dial Indicator 1015A-431J Thickness Gauge Without Case, 0.0005" Graduation, 1/2" Range, 0-50 Dial ... https://jumboindustrial.com/products/starrett-1015a-6-inch-reading-portable-dial-indicator-1015a-431j-thickness-gauge-without-case-0-0005-graduation-1-2-range-0-50-dial-reading Brand: StarrettPublisher: StarrettDetails: After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. Throat depths include 2-1/2", 4", and 6". The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 1/4" in diameter and is 1/8" thick.UPC: 049659676525EAN: 0049659676525 shopify_US_849841061935 new 509.02 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/416eGez4PhL_grande.jpg?v=1528151813 Starrett Dimensional Measurement yes 049659676525 0.0 kg Mitutoyo 329-250-10 Digital LCD Depth Gauge, Interchangeable Rods, Micrometer Type, 0-150mm Range, 0.001mm Graduation, +/-0.004mm Accuracy https://jumboindustrial.com/products/mitutoyo-329-250-10-digital-lcd-depth-gauge-interchangeable-rods-micrometer-type-0-150mm-range-0-001mm-graduation-0-004mm-accuracy Brand: MitutoyoFeatures: Measurement range for series of 0 up to 300mm, and resolution of 0.001mmLCD screen displays in metricIncludes 6 or 12 interchangeable measuring rods that can be adjusted in 25mm incrementsOrigin-set, preset, zero, data hold, and data output functions for flexibilitySatin chrome finish on the body for readability and hardened steel base for durability and accuracyPublisher: MitutoyoDetails: The Mitutoyo Series 329 Digital LCD Depth Gauges, Interchangeable Rods, Micrometer Type, Metric, depending on the model, has a range of either 0 to 150mm or 0 to 300mm and a resolution (or smallest graduation interval) of 0.001mm. (See the product catalog for information on accuracy.) Depending on the measuring range, these gauges include 6 or 12 measuring rods that can be adjusted in 25mm increments. The LCD screen display has origin-set, preset, zero, data hold, and data output functions for the users' convenience, and displays in metric measurements. The gauges have a ratchet stop and measuring rod clamp for precise measurements. They have a satin chrome finish for readability. The bases are 101.6mm long and made of hardened steel for durability and accuracy. These gauges conform to European Conformity (CE) marking. The gauges in this series include an SR44 battery and a fitted plastic case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth ... shopify_US_849840996399 new 563.15 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/314Q-ipCnOL_grande.jpg?v=1528151813 Mitutoyo Dimensional Measurement yes 4946368580753 0.0 kg Mitutoyo 343-250-30 OMP-25MX Micrometer, Caliper, Outside, 0 mm-25 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-343-250-30-omp-25mx-micrometer-caliper-outside-0-mm-25-mm-0-001-mm Brand: MitutoyoFeatures: Caliper type jaws with carbide measuring facesWith ratchet stop for constant forceSPC outputPublisher: MitutoyoDetails: Mitutoyo 343-250-30 OMP-25MX, Micrometer, Caliper, Outside, 0-25 mm, 0.001 mm.EAN: 4946368689692 shopify_US_849840930863 new 629.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31hsJe-u32L_grande.jpg?v=1528151814 Mitutoyo Dimensional Measurement yes 4946368689692 0.0 kg Starrett 689M-2Z Millimeter Reading Countersink Gauge With Yellow Dial, 100 Degree Angle, 4-9mm Range https://jumboindustrial.com/products/starrett-689m-2z-millimeter-reading-countersink-gauge-with-yellow-dial-100-degree-angle-4-9mm-range Brand: StarrettFeatures: All ground surfaces are of hardened toolIndicators are AGD designGauges furnished in deluxe padded casePublisher: StarrettDetails: Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.UPC: 049659650129EAN: 0049659650129 shopify_US_849839849519 new 510.13 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Q0JqTtNLL_grande.jpg?v=1528151815 Starrett Dimensional Measurement yes 049659650129 0.0 kg Starrett 688-2Z Inch Reading Countersink Gauge, 90 Degree Angle, 0.160-0.360" Range https://jumboindustrial.com/products/starrett-688-2z-inch-reading-countersink-gauge-90-degree-angle-0-160-0-360-range Brand: StarrettFeatures: All ground surfaces are of hardened toolIndicators are AGD designGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.UPC: 049659637038EAN: 0049659637038 shopify_US_849839718447 new 510.13 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41oTjHcUmBL_grande.jpg?v=1528151815 Starrett Dimensional Measurement yes 049659637038 0.0 kg INSIZE 3203-126A Outside Micrometer, 6" - 12", Graduation .0001" https://jumboindustrial.com/products/insize-3203-126a-outside-micrometer-6-12-graduation-0001 Brand: INSIZEFeatures: Carbide measuring facesSupplied with setting standards (except 0-1 inchLock nut and ratchet in case and traceable to nistPublisher: INSIZEDetails: Outside micrometer, 6-12", graduation 0001".EAN: 6928640327223 shopify_US_849839489071 new 541.69 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/411JIjs6e7L_4d27bd1d-c6a3-4646-bf6e-0cc6061a8bf1_grande.jpg?v=1528151815 INSIZE Dimensional Measurement yes 6928640327223 0.0 kg Mitutoyo 511-705 Bore Gage without Indicator, 160-250mm Range, 8mm Gage Stem Diameter https://jumboindustrial.com/products/mitutoyo-511-705-bore-gage-without-indicator-160-250mm-range-8mm-gage-stem-diameter-1 Brand: MitutoyoFeatures: Total measurement range of 160 to 250 mmGrip reduces influence of heat to retain high-accuracy measurementTwo-point contact for detection of geometry problems such as ovality and taperCarbide-tipped contact points for extended wear and improved abrasion resistancePublisher: MitutoyoDetails: The Mitutoyo 511-705 Bore Gauge without Indicator has a measurement range of 160 to 250 mm. The grip reduces the influence of heat from the operator's hand during use to retain high-accuracy measurement. This gauge uses a two-point contact system for the detection of geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are ... shopify_US_849839423535 new 305.30 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_91dcb251-ee16-44c1-822f-ea350b787cea_grande.jpg?v=1528151816 Mitutoyo Dimensional Measurement yes 603908560685 0.0 kg Starrett 687-2Z Inch Reading Countersink Gauge, 82 Degree Angle, 0.160-0.360" Range https://jumboindustrial.com/products/starrett-687-2z-inch-reading-countersink-gauge-82-degree-angle-0-160-0-360-range Brand: StarrettFeatures: All ground surfaces are of hardened toolIndicators are AGD designGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.UPC: 049659636994EAN: 0049659636994 shopify_US_849839357999 new 478.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31DSKNttgBL_grande.jpg?v=1528151816 Starrett Dimensional Measurement yes 049659636994 0.0 kg 5 1/4-12 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-1-4-12-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 1/4-12 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 1/4-12 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for referenceUPC: 763769022125EAN: 0763769022125 shopify_US_849839194159 new 513.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_718f33a1-883c-4008-817f-f424b852d9b1_grande.jpg?v=1528151816 Linsen Dimensional Measurement yes 763769022125 0.0 kg VETUS INSTRUMENTS DR380 Digital Coating Thickness Gauge with Large LCD Display Portable Coating Thickness Testing Instrument Electromagne... https://jumboindustrial.com/products/vetus-instruments-dr380-digital-coating-thickness-gauge-with-large-lcd-display-portable-coating-thickness-testing-instrument-electromagnetic-induction-and-eddy-current-principle Brand: VETUS INSTRUMENTSFeatures: Measurement accuracy: ±(1%-3%)H+1.5μmResolution:0.1μm /1μm (less than 100μm is 0.1μm, more than 100μis 1μm)Large LCD display, backlight, large display, any angle reading height is clear and accurate, Low voltage indicationFull intelligent touch keys, anti slip, unique design, novel, user-friendly, compact structure, leading technology,Automatic identification of ferrous and non ferrous substrates.Electromagnetic Induction and Eddy Current PrinciplePublisher: VETUS INSTRUMENTSDetails: DR380 coating thickness tester is a dual gauge, in accordance with the national industry: coating the surface coverage GB/T 8393-1996 standard professional measurement of metal material layer thickness of the object of professional nondestructive testing instrument, simple use, convenient carrying, large size, large LCD display, backlight direct reading more clearly, the use of imported high-quality metal probe structure precision strong, better repeatability, performance is still good. It uses the following different methods according to the different metal matrix. A. magnetic thickness measurement, nondestructive measure magnetic metal substrates (such as steel and iron) and non-magnetic thickness (such as zinc, chromium, indium, enamel, rubber, paint, powder, electrophoresis, enamel, paint coating, etc.) B. eddy thickness method, nondestructive measurement of non magnetic metal substrates (such as aluminum, copper, stainless steel) on non conductive co... shopify_US_849838932015 new 513.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51OIVfOiIbL_grande.jpg?v=1528151817 VETUS INSTRUMENTS Dimensional Measurement yes 647904230838 0.0 kg Mitutoyo 3062S-19 Dial Indicator, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, White Dial, 0-100 Reading, 78mm Dial Dia., 0-100mm Range, 0.... https://jumboindustrial.com/products/mitutoyo-3062s-19-dial-indicator-m2-5x0-45-thread-8mm-stem-dia-lug-back-white-dial-0-100-reading-78mm-dial-dia-0-100mm-range-0-01mm-graduation-0-05mm-accuracy Brand: MitutoyoColor: WhiteFeatures: Stem diameter 8mm, M2.5-0.45 thread sizeMeasuring force: 3.2N or lessShockproof, jeweled bearing, with coaxial revolution counterUse in a vertical position onlyProvided with inspection certificatePublisher: MitutoyoRelease Date: 2017-05-15Details: Dial gauges with a large-diameter (78mm / 3.07") graduation face to ease reading, All types come with limit pins and an outer frame clamp as standard.EAN: 4946368524894 shopify_US_849838604335 new 645.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21oc4IcIAwL_grande.jpg?v=1528151818 Mitutoyo Dimensional Measurement yes 4946368524894 0.0 kg Mitutoyo 317-351 Uni-Mike LCD Outside Micrometer, Friction Thimble, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0002" Accuracy https://jumboindustrial.com/products/mitutoyo-317-351-uni-mike-lcd-outside-micrometer-friction-thimble-0-1-0-25-4mm-range-0-00005-0-001mm-graduation-0-0002-accuracy Brand: MitutoyoFeatures: Uses interchangeable anvils (flat and rod included) to support varied measurement needsDigital, single-value readout LCD displays in inch and metric units for readabilityStatistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately)Knurled friction thimble helps provide quick adjustment capabilityRated IP65 for resistance to penetration by dust and liquid up to the force of a low-pressure water jetPublisher: MitutoyoDetails: The Mitutoyo 317 series Uni-Mike LCD outside micrometer uses interchangeable anvils to support varied measurement needs, and includes a flat and rod anvil. It also has a friction thimble mechanism, an LCD digital readout that converts between inches and metric with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, for protection against penetration by dust, liquids, and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The frame is made of high-grade tool ... shopify_US_849837064239 new 556.04 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31h8Mh_2BljWL_grande.jpg?v=1528151820 Mitutoyo Dimensional Measurement yes 603908383109 0.0 kg Starrett ST444.1BXRLZ Outside Micrometer Set, Carbide, 0.0001" Graduation, 0-4" Measuring Range https://jumboindustrial.com/products/starrett-st444-1bxrlz-outside-micrometer-set-carbide-0-0001-graduation-0-4-measuring-range Brand: StarrettFeatures: Starrett quality at competitive priceAccurate, rugged, and easy to UseRatchet stop, lock Nut, and standards includedMicro-lapped measuring facesPublisher: StarrettDetails: The Starrett St444.1 outside micrometer set includes 1", 2", 3" and 4" micrometers, three standards, adjusting wrench, in case. A popular precision micrometers used by skilled workmen worldwide. This ST444.1BXRLZ features 0-4" measuring range. Smooth friction thimble for uniform pressure, the combination ratchet and speeder for uniform pressure and quicker adjustment, or a plain micrometer that depends on your own “feel”. recommended for mechanics, automotive service and machine shops, tool rooms, inspection departments and wherever gaging involves a wide range of measurements. Set, 0-4", 0.0001" grad, carbide faces, ratchet stop, lock nut involves a wide range of measurements.UPC: 049659725315EAN: 0049659725315 shopify_US_849837031471 new 517.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51G4o2jzAaL_grande.jpg?v=1528151820 Starrett Dimensional Measurement yes 049659725315 0.0 kg Automatic Level Kit, 32X, 450 ft https://jumboindustrial.com/products/automatic-level-kit-32x-450-ft Brand: JohnsonFeatures: Price For: Each Field of View: 1 Degrees 30 min Includes: Tripod, Grade Rod, Manual, Carrying Case Accuracy: +/- 1/16" @ 200 ft. Horizontal Range: 360 Degrees Horizontal Graduations: 1 Degrees Leveling Type: Wire Hung Compensator, 3 Leveling Screws Number of Lenses: 8 Characteristics: Glass Reticle Has Stadia Lines With 1:100 Ratio, Reticle Cross Lines Minimum Focus: 4 ft.Item: Automatic Level Kit Mounting Thread: 5/8-11 Aperture: 1.4" Magnification: 32X Working Range: 450 ft. Country of Origin (subject to change): ChinaPublisher: JOHNSONDetails: ' Automatic Level Kit, Magnification 32X, Working Range 450 ft., Accuracy +/- 1/16 In. @ 200 ft., Horizontal Range 360 Degrees , Horizontal Graduations 1 Degrees , Minimum Focus 4 ft., 1.4 In. Aperture, Field of View 1 Degrees 30 min, Number of Lenses 8, Leveling Type Wire Hung Compensator, 3 Leveling Screws, Mounting Thread 5/8-11, Glass Reticle Has Stadia Lines With 1:100 Ratio, Reticle Cross Lines, Includes Tripod, Grade Rod, Manual, Carrying Case 'UPC: 094721133949EAN: 0094721133949 shopify_US_849836933167 new 577.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41geZnbEBpL_grande.jpg?v=1528151821 Johnson Dimensional Measurement yes 094721133949 0.0 kg HHIP 4100-0058 Caliper Extender ATTACHMENT, 71" EXTENTION Kit, +/005" Accuracy https://jumboindustrial.com/products/hhip-4100-0058-caliper-extender-attachment-71-extention-kit-005-accuracy Brand: HHIPFeatures: A unique caliper Accessory that extends the range of your 6 inchAllow both inside and outside measurementsExtension bars are Made from high grade aluminum and black Anodized with white numerals for clarity and protectionAll mounting hardware and calibration Rods are includedComplete instructions are includedPublisher: ABS Import Tools, Inc.Details: HHIP caliper extender attachments features a unique caliper accessory that extends the range of your 6 inch caliper allow both inside and outside measurements extension bars are made from high grade aluminum and black anodized with white numerals for clarity and protection all mounting hardware and calibration Rods are included complete instructions are included product specifications: extension Kit: 71"; accuracy: +/-.005".UPC: 769053033334EAN: 0769053033334 shopify_US_849836736559 new 500.72 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41hqXck3ZzL_0c246dba-a655-4e90-8cb5-c1e0045a7711_grande.jpg?v=1528151821 HHIP Dimensional Measurement yes 769053033334 0.0 kg Brown and Sharpe 01690032 INTERAPID Large Magnetic Base, 11" Length x 15.36" Height https://jumboindustrial.com/products/brown-sharpe-01690032-interapid-large-magnetic-base-11-length-x-15-36-height Brand: TESA Brown andamp; SharpeFeatures: Articulating arm for hard-to-reach areasDovetail clamp with fine adjustment for attachment to any standard indicator400 Newton measuring force for strong holding powerProvides precise gage settingCapable of high accuracy measuring with high-resolution indicators and electronic gaugesPublisher: Hexagon MetrologyDetails: The Brown andamp; Sharpe 01690032 Interapid Magnetic Base provides precise gauge setting and is capable of high accuracy measuring with high-resolution indicators and electronic gauges. It features flexible arms that enable the indicator to be situated in hard-to-reach areas, and its dovetail clamp with fine adjustment allows the user to attach it to any standard, universal dovetailed indicator. The block has a V-groove with 1.18”-5.9” diameter that allows it to fit in unusual spaces or on rounded surfaces. It offers strong holding power with 400 Newton measuring force. Dimensions are 11” (l) x 15.36” (h). Interapid magnetic bases are used to hold indicators at points along an item for high accuracy measurements. They are typically used by machinists, calibration labs, and in general setup situations. Brown andamp; Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown andamp; Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.UPC: 62241929434... shopify_US_849835491375 new 523.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ahOvdEMZL_grande.jpg?v=1528151823 TESA Brown & Sharpe Dimensional Measurement yes 622419294346 0.0 kg INSIZE 6526-100 Precision Vise, 2.874" https://jumboindustrial.com/products/insize-6526-100-precision-vise-2-874 Brand: INSIZEFeatures: Parallelism:30μin/per inchSquareness: 60μin/per inchMade of Sk2 tool steel. Hardness hrc55-60Publisher: INSIZEDetails: Precision vise, 2.874".EAN: 6928640321047 shopify_US_849834836015 new 325.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41T3qBxgcpL_grande.jpg?v=1528151825 INSIZE Dimensional Measurement yes 6928640321047 0.0 kg Hanchen Instrument 7001-A CO2 Tester for Beverage and Beer https://jumboindustrial.com/products/hanchen-instrument-7001-a-co2-tester-for-beverage-and-beer Brand: Hanchen Instrument®Features: For measuring CO2 content of beer or carbonated drinksMade of high quality stainless steel and polymer materialRoller-desiged bracket, no skid and better sealing performancePart under the column can effectively prevent accidental injurySuitable for measuring all sizes of bottled and canned samplesPublisher: Hanchen InstrumentDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Production Description   7001-A  beer CO2 tester  ued for measuring the carbon dioxide content of carbonated drinks, beer . Accord to the  standard "GB / T 10792-2008 carbonated beverages (soda)," The carbon dioxide tester  can measure the total pressure of carbonated drinks, with the temperature measurement , and the Carbon dioxide absorption coefficient table can be obtained by calculating the carbon dioxide content, suitable for measuring all sizes of bottled and canned samples Technical Data CO2 measuring range:0-4.00%v/v (0.8%w/w) Pressure measuring range:0.4/0.6 Mpa Resolution:0.01Mpa Temperature measuring range: 0-50℃ Resolution:0.1℃ Height of bottle:50~330mm Dia of bottle:≤102mm Application : Suitable for testing Co2 content of beverage Suitable for testing Co2 content of beer Suitable for testing Co2 content of soft drinks Suitable for testing Co2 content of sparkling wine Suitable for testing air content of bottled beer (beverage)in bottleneck Suitable for measuring vacuum degree of bottle ... shopify_US_849834606639 new 359.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ccIw6ljjL_grande.jpg?v=1528151825 Hanchen Instrument® Dimensional Measurement yes 6019891387095 0.0 kg Leica NA724 Automatic Optical Level w/ user 641983 https://jumboindustrial.com/products/leica-na724-automatic-optical-level-w-user-641983 Brand: Leica GeosystemsFeatures: Impact and vibration resistant. Designed for the daily abuses of large and small construction sites.Water and Dust Proof - Sealed and gas filled. "Best in Class" against the weather.Precise and Robust Compensator - Accuracy and reliability are assured.First Class Optics - Resolution and clarity are world famous.24 X magnification. Good accuracy on larger jobsites and longer distances.Publisher: Leica GeosystemsDetails: Leica NA724 Automatic Optical Level w/ user manualUPC: 024148085491EAN: 0024148085491 shopify_US_849834475567 new 450.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41SF9mzRxCL_grande.jpg?v=1528151826 Leica Geosystems Dimensional Measurement yes 024148085491 0.0 kg Vermont Gage 461117510 3"-8 NPSM 2A Go Ring Gage https://jumboindustrial.com/products/vermont-gage-461117510-3-8-npsm-2a-go-ring-gage Brand: Vermont GageFeatures: Class X tolerance per ANSI/ASME B1.20.1Manufactured from Tool Steel; 60/62 Rc (cold stabilized)Pitch Diameter:3.3862"Certificate of Accuracy included; NIST traceablePublisher: Vermont GageDetails: Vermont Gage's NPSM Straight Pipe Ring Gages are used to check straight external pipe threads. Perfect for inspecting standard pipe and pipe fittings.UPC: 662631563011EAN: 0662631563011 shopify_US_849834147887 new 520.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41jEJpHvktL_c33d36c6-ad60-437a-bdaf-c0cd6e1b1cb7_grande.jpg?v=1528151826 Vermont Gage Dimensional Measurement yes 662631563011 0.0 kg Starrett F2730-1AD AD Electronic Indicator, 1" (25 mm) Range, 0.0001" Reading https://jumboindustrial.com/products/starrett-f2730-1ad-ad-electronic-indicator-1-25-mm-range-0-0001-reading Brand: StarrettFeatures: Rugged, sealed enclosuresOur most versatile line of electronic indicatorsAvailable in three stylesRemote display and accompanying probe SeriesGlass scale design with an unsurpassed accuracy of two resolutions when measuring from a known standardPublisher: StarrettDetails: All indicators feature a glass scale design with an unsurpassed accuracy of ± two resolutions when measuring from a known standard. Rugged, sealed enclosures as standard. American designed and manufactured.UPC: 049659000450EAN: 0049659000450 shopify_US_849833951279 new 520.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41wzuZxm9KL_grande.jpg?v=1528151827 Starrett Dimensional Measurement yes 049659000450 0.0 kg Starrett F2730IQ IQ Electronic Indicator, 1" / 25 mm Range https://jumboindustrial.com/products/starrett-f2730iq-iq-electronic-indicator-1-25-mm-range Brand: StarrettFeatures: Rugged, sealed enclosures as standardAmerican designed and manufacturedAdditional Power Options Through AC Jack or Data OutputProgrammable Lock CombinationUser Tolerance Settings (high and low)Publisher: StarrettDetails: All indicators feature a glass scale design with an unsurpassed accuracy of ± two resolutions when measuring from a known standard. Rugged, sealed enclosures as standard. American designed and manufactured.UPC: 049659495096EAN: 0049659495096 shopify_US_849833197615 new 514.26 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41PBNqHylEL_grande.jpg?v=1528151827 Starrett Dimensional Measurement yes 049659495096 0.0 kg INSIZE IST-SD200 Digital Torque Screwdriver, 3.54~17.7" lb. https://jumboindustrial.com/products/insize-ist-sd200-digital-torque-screwdriver-3-54-17-7-lb Brand: INSIZEFeatures: Accuracy: clockwise ±2.5 percent, counter-clockwise ±3.5 percent . Resolution 0.01In.Lb. Size of shank 1/4 inchClockwise and counter-clockwise operation. Unit: in.Lb, cn.M, kg.Cm. Peak and track working modeTarget torque value can be set, with audible and visible alarm: green led light on and buzzer soundsBuzzer sounds when target torque value is reachedPower off automatically in 5 minutes without any operations. Supplied with calibration certificatePublisher: INSIZEDetails: Digital torque screwdriver, 3.54~17.7In.Lb.EAN: 6928640326165 shopify_US_849833001007 new 609.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ncA9Gu-iL_ba3b74ba-13f0-4421-88ce-7235c9b7a2fc_grande.jpg?v=1528151828 INSIZE Dimensional Measurement yes 6928640326165 0.0 kg Mitutoyo 511-744 Dial Bore Gage, 4.0-6.5", 0 .0005" Graduation, Stem Diameter 3/8" with 2922SB Dial Indicator https://jumboindustrial.com/products/mitutoyo-511-744-dial-bore-gage-4-0-6-5-0-0005-graduation-stem-diameter-3-8-with-2922sb-dial-indicator Brand: MitutoyoFeatures: Carbide-tipped contact points for durabilityThe dial indicator is fully protected by a rugged coverOptional extension rods can be attached for measuring deep holesPublisher: Mitutoyo America CorporationDetails: Mitutoyo Dial Bore Gage 511-744, 4.0-6.5 In with2922SB dial indicator, 0.0005 In graduation, stem 3/8 In diam.EAN: 4946368612713 shopify_US_849832640559 new 511.56 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31yb3cn0iHL_grande.jpg?v=1528151829 Mitutoyo Dimensional Measurement yes 4946368612713 0.0 kg Mitutoyo 543-486B Absolute LCD Digimatic Indicator ID-C, Calculation Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-2" Range, 0.0000... https://jumboindustrial.com/products/mitutoyo-543-486b-absolute-lcd-digimatic-indicator-id-c-calculation-type-m2-5x0-45-thread-8mm-stem-dia-flat-back-0-2-range-0-00001-0-05-0-0002-1mm-graduation-0-00012-accuracy Brand: MitutoyoFeatures: The absolute digimatic indicator performs internal calculations using the formula ax+b+cx-1 (assuming spindle displacement as x)While the specified coefficients a, b and, c can be set with respect to the purpose of measurement or dimensions of the fixturesThis unique features allows you to read your measurements directly, without fumbling for conversionsSwitchable resolution 0.00001 - 0.05 inchesStem diameter 8mm, M2.5 x 0.45 ThreadPublisher: MitutoyoDetails: A conventional digimatic indicator simply displays a spindle displacement, but the calculation-type digimatic indicator incorporates an internal calculation function in place of spindle displacement. With fixtures, measurements such as feeler, inside diameter and radius of curvature measurement can easily be obtained without the hassle of conversion tables or equivalents. Length standard: absolute electrostatic capacitance type linear encoder. Maximum response speed unlimited. Battery: sr44 (1 pc.), 938882. Battery life approximately 12 months under normal use. Function are origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only). Alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error. Measuring force: 2.3N or less.EAN: 4946368508900 shopify_US_849831133231 new 625.63 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31FaUxRuILL_grande.jpg?v=1528151831 Mitutoyo Dimensional Measurement yes 4946368508900 0.0 kg Mahr Federal 4335900 1002 Z Millimess Mechanical Dial Comparator, ±0.001" Range, 0.00002" Resolution, 0.315" Stem, Yellow https://jumboindustrial.com/products/mahr-federal-4335900-1002-z-millimess-mechanical-dial-comparator-0-001-range-0-00002-resolution-0-315-stem-yellow Brand: Mahr FederalColor: YellowFeatures: Easy to read with adjustable tolerance markers. Eliminate reading errors as possible with multi-rev dial indicatorsMeasuring Spindle is mounted in a high precision ball guide for minimum hysteresis. Insensitive to lateral forces (side play) acting on the measuring spindleMeasuring spindle can be retracted with either a screw in cable release or with a lifting knob. The mounting shank and spindle are both made of stainless steelMaximum sensitivity and accuracy are ensured by the jeweled movement and in conjunction with the precision gears and pinionsA lockable fine adjustment screw allows for easy zeroing of the comparatorPublisher: MahrRelease Date: 2017-05-15Details: Millimess is the "classic" amongst all measuring instrument. For over 60 years the Millimess series of dial comparators has been synonymous with both high precision and extreme robustness. Both maximum accuracy and a minimal reversal span error are obtained through the levers, gears and pinions being supported with jeweled bearings and that the measuring spindle running in a ball bush guide. Millimess is therefore particularly suitable for measuring tasks where the accuracy and the reversal span of a conventional dial indicator are not sufficient. Further advantages of Millimess are the simple handling, the easy reading as well as the movement being absolute shockproof.UPC: 712155481084EAN: 0712155481084 shopify_US_849831100463 new 525.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31OdOHC4B4L_grande.jpg?v=1528151832 Mahr Federal Dimensional Measurement yes 712155481084 0.0 kg INSIZE IST-2W200A Interchangeable Head Digital Torque Wrench, 354~1770" lb./29.5 ~ 147.5' lb. https://jumboindustrial.com/products/insize-ist-2w200a-interchangeable-head-digital-torque-wrench-354-1770-lb-29-5-147-5-lb Brand: INSIZEFeatures: Accuracy: clockwise ±2 percent, counter-clockwise ±3 percent . Res 1In.Lb/0.1Ft.Lb. Socket size 71× 55 inchClockwise and counter-clockwise operation. Unit: in.Lb, ft. Lb, n. M, kg.Cm, degree. Peak and track working modeTarget torque value can be set, with audible and visible alarm: green led light on and buzzer soundsBuzzer sounds when target torque value is reachedPublisher: INSIZEDetails: Interchangeable head Digital torque wrench, 354~1770in.Lb/29.5 ~ 147.5ft.Lb.EAN: 6928640349157 shopify_US_849830903855 new 605.13 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31QuvNAHeLL_28a29c75-a1e3-4daf-b79f-1bd44fe17c3f_grande.jpg?v=1528151832 INSIZE Dimensional Measurement yes 6928640349157 0.0 kg VETUS INSTRUMENTS UM-2D Handheld Portable Through Paint Coating Ultrasonic Thickness Gauge Meter Tester 0.03'' to 12'' w/ PT-08 Probe (ec... https://jumboindustrial.com/products/vetus-instruments-um-2d-handheld-portable-through-paint-coating-ultrasonic-thickness-gauge-meter-tester-0-03-to-12-w-pt-08-probe-echo-echo-0-8-to-300mm-through-paint-coatings-thickness-guge Brand: VETUS INSTRUMENTSFeatures: ★ Operating Principle: Standard mode: P-E (pulse-echo) method with dual-crystal probes; Coating mode: E-E (echo-echo) method with dual-crystal probes★ Measuring Range :0.8~300mm in standard mode; 3.0~18mm in through coating mode ( Depending on probe, material and surface condition )★ 0.1mm resolution, 128×64 dot-matrix LCD screen with EL backlight★ Automatic V -Path Correction★ Auto shut-off:  after 5 minutes of non-usePublisher: VETUS INSTRUMENTSDetails: Shipping Policy : Battery and Liquid not included during the shipping In addition to be compatible with all the function of UM-2, UM-2D is equipped with an additional function of through coating, namely when there is oil paint on the surface of the object, the net thickness of the material can be directly measured without necessarily removal of the oil paint. Technical Specifications *Operating Principle: Standard mode: P-E (pulse-echo) method with dual-crystal probes; Coating mode: E-E (echo-echo) method with dual-crystal probes *Measuring Range :0.8~300mm in standard mode; 3.0~18mm in through coating mode ( Depending on probe, material and surface condition ) *Resolution: mm -0.01, 0.1 inches -0.001, 0.01 *V -Path Correction:Automatic  *Probe zero adjustment: 1-Point Calibration(normal measurement); 2-Point Calibration(curve surface measurement or other special application with a high precision) *Measuring error: Up to 10mm: ±0.05mm; Above 10mm: ±(0.5%H+0.01)mm *Repeatability: ±0.0... shopify_US_849829986351 new 735.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41B_2B1sGn-tL_grande.jpg?v=1528151834 VETUS INSTRUMENTS Dimensional Measurement yes 647904232467 0.0 kg Starrett B811-5PZ Dial Test Indicator without Attachments, Swivel Head, Black Dial, 0-15-0 Reading, 0-0.03" Range, 0.0005" Graduation https://jumboindustrial.com/products/starrett-b811-5pz-dial-test-indicator-without-attachments-swivel-head-black-dial-0-15-0-reading-0-0-03-range-0-0005-graduation Brand: StarrettColor: BlackFeatures: Series 811 with 1-3/8" diameter adjustable face, steel contact point, and choice of red, white, or black faceBalanced dial with continuous clockwise pointer rotation with automatic reversal, and ball-bearing lever system with measuring insert swivels through to 210 degreesFace can swivel from fully vertical to fully horizontal and has two dovetail mounts for mounting horizontally or vertically from the top or backGear-driven, jeweled movement, and contacts are frictionally adjustable and replaceableMeets or exceeds accuracy and performance requirements of national and international standards, and are traceable to the United States National Institutes of Standards and Technology (NIST).Publisher: StarrettDetails: The Starrett dial test indicator without attachments has a Red, black, or white face, and inch measurements. The face can be set at any point between vertical and horizontal (from 0 to 90 degrees). The choice of red, white, or black dial face can be used in a variety of lighting settings. The steel ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation with automatic reversal and helps prevent plus or minus confusion. The ball-bearing lever system with measuring insert swivels through to 210 degrees. The dial has face that can swivel from fully vertical to fully horizontal, an... shopify_US_849829199919 new 527.91 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41g5XTVFjqL_grande.jpg?v=1528151835 Starrett Dimensional Measurement yes 049659632620 0.0 kg 4 7/8-8 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-7-8-8-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 7/8-8 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 7/8-8 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021968EAN: 0763769021968 shopify_US_849829003311 new 529.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_76fa3a97-b1f6-41b7-a95d-fb0d4a92e639_grande.jpg?v=1528151835 Linsen Dimensional Measurement yes 763769021968 0.0 kg 5"-8 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-8-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5"-8 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5"-8 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769022019EAN: 0763769022019 shopify_US_849828937775 new 529.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_e5d2a248-c6d0-4443-8ca3-b29b54ca4569_grande.jpg?v=1528151836 Linsen Dimensional Measurement yes 763769022019 0.0 kg Starrett S234G End Measuring Rod Set with INSULATED HANDLE and Spherical Ends, 1"-11", 11 Pieces https://jumboindustrial.com/products/starrett-s234g-end-measuring-rod-set-with-insulated-handle-and-spherical-ends-1-11-11-pieces Brand: StarrettFeatures: Rods or "standards" are for checking and setting micrometers of 2 inchMade of special tool steel in rod form with ends hardened and accurately lapped to a spherical radiusUsed on machine tools for comparing gagesIdeal for checking precision measuring toolsThese standards are the ones used for all micrometers furnished with standardsPublisher: StarrettRelease Date: 2017-03-06Details: Starrett S234G end measuring rod set with insulated handle and spherical ends, 1"-11", 11 pieces. Starrett 234 end measuring Rods or “standards” are for checking and setting micrometers of 2 inch capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.UPC: 049659519297EAN: 0049659519297 shopify_US_849828773935 new 529.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41aJLb1XPEL_grande.jpg?v=1528151836 Starrett Dimensional Measurement yes 049659519297 0.0 kg INSIZE 3206-20 Outside Micrometer with Interchangeable Anvils, 16" -20", Graduation .001" https://jumboindustrial.com/products/insize-3206-20-outside-micrometer-with-interchangeable-anvils-16-20-graduation-001 Brand: INSIZEFeatures: Ratchet stop. Carbide measuring facesSupplied with setting standardsLock nut and ratchet in case and traceable to nistPublisher: INSIZEDetails: Outside micrometer with interchangeable anvils, 16-20", graduation 001".EAN: 6928640327339 shopify_US_849828708399 new 527.25 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41F9LIvtFpL_392adcc9-e0af-4d6b-b5e6-c27f8569d90b_grande.jpg?v=1528151836 INSIZE Dimensional Measurement yes 6928640327339 0.0 kg Phase II 107-034 0-12" Micrometer SET Graduation 0.0001" https://jumboindustrial.com/products/phase-ii-107-034-0-12-micrometer-set-graduation-0-0001 Brand: PHASE IIFeatures: Now you can accurately measure even the smallest of items.All micrometers have carbide measuring faces.Ratchet stop.Positive locking clamp.Heat insulated frame thru 4".Publisher: PHASE IIDetails: If an object fits between the two anvils of this outside micrometer, you can measure its depth, length and thickness. Use the micrometer to measure spheres and blocks and to determine the thickness of a wire, the diameter of a hole or the depth of a slot up to 1". Carbide measuring faces ensure greater wear resistance. Staggered numbering offers precise markings and easy readability. The ratchet stop delivers constant pressure for more accurate measurements. Includes a protective wooden case. All micrometers are supplied with standards (except 0-1"). Crisp clear graduations on satin-chrome finish.UPC: 662995191660EAN: 0662995191660 shopify_US_849828544559 new 719.03 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51U6QjYvmJL_grande.jpg?v=1528151837 PHASE II Dimensional Measurement yes 662995191660 0.0 kg Mitutoyo 324-351-30 GMB-1"MX Gear Micrometer, IP65, 0"-1", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-324-351-30-gmb-1mx-gear-micrometer-ip65-0-1-0-00005-0-001-mm Brand: MitutoyoFeatures: Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuring facesWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 324-351-30 GMB-1"MX, Micrometer, Gear, 0-1",.00005"/0.001 mm, IP65.EAN: 4946368695723 shopify_US_849827987503 new 597.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41MCsn3euqL_grande.jpg?v=1528151838 Mitutoyo Dimensional Measurement yes 4946368695723 0.0 kg Mitutoyo ABSOLUTE 551-331-10 Digital Caliper, Stainless Steel, Battery Powered, Nib Style Jaw, 0-300mm Range, +/-0.04mm Accuracy, 0.01mm ... https://jumboindustrial.com/products/mitutoyo-absolute-551-331-10-digital-caliper-stainless-steel-battery-powered-nib-style-jaw-0-300mm-range-0-04mm-accuracy-0-01mm-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Nib-style lower jaws with round measuring faces for accurate inside diameter (ID) measurementStandard upper jaws for precise outside diameter (OD) measurementsHardened stainless steel construction for protection of caliper componentsDigital, single-value readout LCD display in metric units for readabilityFunction control buttons on the face, for ease of use: Origin, On/Off, and Zero/ABS (Absolute Scale)Publisher: MitutoyoDetails: The Mitutoyo 551 series ABSOLUTE Digimatic caliper is a digital caliper that is made of durable hardened stainless steel, uses Mitutoyo’s ABSOLUTE linear encoder technology, and has both standard and nib style jaws. These calipers have accessible function control buttons, such as Origin-set, Zero-setting, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in their ability to make precise measurements, the digital caliper’s LCD increases reading reliability. The caliper has the ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors. Standard upper jaws measure outer diameter (OD), while the lower rounded nib-style jaws measure inner diameter (ID). Nib-style jaws are suitable for grasping round and spherical-shaped instruments to gauge and provide clear readings up to the maximum level of accuracy. In making inside diameter (ID) measurements, the round outside surface of each ID nib fits closely against curve of the inside surface being me... shopify_US_849827758127 new 882.06 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31N7DdhudsL_grande.jpg?v=1528151839 Mitutoyo Dimensional Measurement yes 4946368585352 0.0 kg Mitutoyo 500-737-10 Absolute Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, 0-6" Range, +/-0.001" Accuracy, 0.0005" Reso... https://jumboindustrial.com/products/mitutoyo-500-737-10-absolute-digital-caliper-stainless-steel-battery-powered-inch-metric-0-6-range-0-001-accuracy-0-0005-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper and ABSOLUTE linear encoder technology componentsFour-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and stepDigital, single-value readout LCD display in inch and metric units for readabilityFunction control buttons on caliper face for ease of access: Origin, On/Off, and Zero/ABS (Absolute Scale)IP67-certified for protection against dust and temporary submersion in waterPublisher: MitutoyoDetails: The Mitutoyo 500 series ABSOLUTE Coolant Proof Caliper is a dust and water resistant digital caliper made of durable hardened stainless steel using Mitutoyo’s ABSOLUTE linear encoder technology. This caliper conforms to IP67 protection levels enabling it to operate in workshop conditions exposed to water, dust, coolant, or oils. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper has an LCD that displays in inch and metric units which increases reading reliability, and reflects all ABSOLUTE system activities. This digital caliper has accessible function control buttons, such as Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. The Absolute Scale (ABS) function tracks the set origin point, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting. The LCD can b... shopify_US_849826938927 new 531.70 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31sBOadWWaL_grande.jpg?v=1528151839 Mitutoyo Dimensional Measurement yes 4946368574950 0.0 kg INSIZE 1156-300 Electronic Height Gage with Driving Wheel, 0" - 12" https://jumboindustrial.com/products/insize-1156-300-electronic-height-gage-with-driving-wheel-0-12 Brand: INSIZEFeatures: Resolution: 0005 inchAutomatic power off, move the digital unit to turn on power. Carbide tipped scriberMade of stainless steel. Battery Cr2032. Data outputPublisher: INSIZERelease Date: 2017-05-15Details: Electronic Height gage with driving wheel, 0-12"/0-300mm.EAN: 6928640350924 shopify_US_849826742319 new 611.80 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31u9sZxnh-L_e289f0f8-9c53-4a8e-a73b-156257fdf62e_grande.jpg?v=1528151840 INSIZE Dimensional Measurement yes 6928640350924 0.0 kg Starrett SV436.1MBXRLZ 436.1 Series Outside Micrometer Set, Ratchet Stop, Lock Nut, Carbide Faces, 0-100mm Range, 0.001mm Graduation https://jumboindustrial.com/products/starrett-sv436-1mbxrlz-436-1-series-outside-micrometer-set-ratchet-stop-lock-nut-carbide-faces-0-100mm-range-0-001mm-graduation Brand: StarrettFeatures: This set includes 25mm, 50mm, 75mm and 100mm micrometers with three standards in caseAdvanced sleeve design with staggered lines and distinct figures for precise and easy readabilityBalanced frame and thimble design insure easy handlingGracefully designed tapered frame for use in narrow slots and tight placesMicro-lapped measuring faces, quick and easy adjustmentPublisher: StarrettDetails: Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments, and wherever gaging involves a wide range of measurements. All sets come with attractive, protective cases which keep micrometers and standards together, readily accessible. Rigid and stable special cast iron frame with perforations for lightness and ribbed for strength and stability.UPC: 049659680720EAN: 0049659680720 shopify_US_849826709551 new 1,006.92 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51z2bBhrmML_956cad02-e657-4b5b-8b60-6ebb585e06d3_grande.jpg?v=1528151840 Starrett Dimensional Measurement yes 049659680720 0.0 kg 95mm x 3 Metric Thread Ring Gage M95 x 3.0mm Pitch https://jumboindustrial.com/products/95mm-x-3-metric-thread-ring-gage-m95-x-3-0mm-pitch Brand: MerlintoolsFeatures: Metric M95 x 3.0mm Thread Ring Gage.Thread pitch: 3.0mmClass: 6gT pass and Z not passPublisher: MerlintoolsDetails: metric M95 x 3.0mm set thread ring gage.UPC: 737382811374EAN: 0737382811374 shopify_US_849826119727 new 536.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41-wisKREXL_d62851f8-e539-4f2a-90bb-5732cd7e1b9b_grande.jpg?v=1528151841 Merlintools Dimensional Measurement yes 737382811374 0.0 kg Mitutoyo 543-492B, IDC Digimatic Indicator, .00005"/.0001"/.0005"/0.001mm/0.01mm X 2", 3/8" Stem, Flat Back https://jumboindustrial.com/products/mitutoyo-543-492b-idc-digimatic-indicator-00005-0001-0005-0-001mm-0-01mm-x-2-3-8-stem-flat-back Brand: MitutoyoFeatures: Absolute Encoder ensures all settings and readings maintained for the life of the battery (even when the power is turned off)Preset, Zero-Set, inch/mm, +/- direction and GO/±NG functions SPC outputFace rotates 330° for use at various anglesCalculation function f(x)=Ax allows the spindle reading to be multiplied by a constant (ie 2X or .5X)Average battery life 7,000hours using SR-44 batteryPublisher: MitutoyoDetails: Mitutoyo IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: 2", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, PUPC: 603908512615EAN: 4946368586786 shopify_US_849825923119 new 566.53 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31WWYV4qlyL_grande.jpg?v=1528151842 Mitutoyo Dimensional Measurement yes 603908512615 0.0 kg 4 1/8-6 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-1-8-6-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 1/8-6 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 1/8-6 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021654EAN: 0763769021654 shopify_US_849825726511 new 537.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_44ac1d3d-43f6-44e6-9904-dba2d525a54a_grande.jpg?v=1528151842 Linsen Dimensional Measurement yes 763769021654 0.0 kg 4 3/8-6 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-3-8-6-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 3/8-6 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 3/8-6 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021753EAN: 0763769021753 shopify_US_849825693743 new 537.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_e67e38fe-7220-46fc-bc87-35f832414e5c_grande.jpg?v=1528151843 Linsen Dimensional Measurement yes 763769021753 0.0 kg Starrett 120B-12 Dial Caliper, Stainless Steel, Nib Style Jaw, White Face, 0-12" Range, +/-0.001" Accuracy, 0.001" Resolution https://jumboindustrial.com/products/starrett-120b-12-dial-caliper-stainless-steel-nib-style-jaw-white-face-0-12-range-0-001-accuracy-0-001-resolution Brand: StarrettColor: WhiteFeatures: Precise dial graduations of 0.001", with one revolution equivalent to 0.100"Thumb-operated fine adjustment roll allows for one-handed useLock screw holds the sliding jaw in position, to ensure a consistent measurementRack teeth point down to keep foreign matter from clogging the gear, which helps prevent measurement error3" long nib jaws for accessing a larger measuring areaPublisher: StarrettRelease Date: 2017-03-12Details: The Starrett 120B-12 dial caliper measures 0 to 12 inches with 0.001” accuracy, and 3-inch nib jaws for heavy-duty use or accessing more measuring area than conventional calipers. The jaws measure from zero for outside measurements and from 0.300” for inside measurements. This handy measuring tool help ensure reliable and accurate readings with the sharp, black graduations on the no-glare, satin-finished bar, crisp lines on the white dial face, and knife edge contacts for outside measurements. One full revolution of the dial is equivalent to 0.100”. The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, ... shopify_US_849825595439 new 446.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21dhbjGKB5L_grande.jpg?v=1528151843 Starrett Dimensional Measurement yes 049659650679 0.0 kg INSIZE 3590-203E Electronic V-Anvil Micrometer, 0.2"-0.8"/5 mm-20 mm https://jumboindustrial.com/products/insize-3590-203e-electronic-v-anvil-micrometer-0-2-0-8-5-mm-20-mm Brand: INSIZEFeatures: Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 flutesResolution 00005 inchData output. Sr44 or Lr44 battery, automatic power off. Ratchet stop. Carbide measuring facesSupplied with setting standardsPublisher: INSIZERelease Date: 2017-03-12Details: Electronic v-anvil micrometer, 2- 8 inch 5-20mm.EAN: 6928640356117 shopify_US_849825202223 new 546.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41bUr-Lx8iL_grande.jpg?v=1528151843 INSIZE Dimensional Measurement yes 6928640356117 0.0 kg VERMONT GAGE Metric Thread Ring Gage - STYLE: Go/No Go CLASSIFICATION: 6G NOMINAL SIZE : 24mm PITCH : 3.00mm https://jumboindustrial.com/products/vermont-gage-metric-thread-ring-gage-style-go-no-go-classification-6g-nominal-size-24mm-pitch-3-00mm Brand: Vermont GageFeatures: Used for gaging external threads.Publisher: VERMONT GAGEDetails: Classification 6G Nominal Size 24mm Pitch 3.00mm Style Go/No GoUPC: 094724461797EAN: 0094724461797 shopify_US_849824907311 new 570.45 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31nbIGjQe4L_grande.jpg?v=1528151844 Vermont Gage Dimensional Measurement yes 094724461797 0.0 kg Mitutoyo 329-350-30 DMC4-6"MX Depth Micrometer, Interchangeable Rod, 0"-6", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-329-350-30-dmc4-6mx-depth-micrometer-interchangeable-rod-0-6-0-00005-0-001-mm Brand: MitutoyoFeatures: Provides a wide measuring rangeThe rod length can be adjusted in 1 In or 25mm incrementsSPC data outputPublisher: MitutoyoDetails: Mitutoyo 329-350-30 Dmc4-6"MX, Micrometer, Depth, Interchangeable Rod, 0-6",.00005"/0.001 mm.EAN: 4946368695860 shopify_US_849824383023 new 534.83 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Z49lcmMeL_grande.jpg?v=1528151844 Mitutoyo Dimensional Measurement yes 4946368695860 0.0 kg Mahr Federal 4337651 1086 R Reference Digital Indicator with Output, 1.0" (50 mm) Range, Selectable Resistance 0.00002" (0.0005 mm), 3" o... https://jumboindustrial.com/products/mahr-federal-4337651-1086-r-reference-digital-indicator-with-output-1-0-50-mm-range-selectable-resistance-0-00002-0-0005-mm-3-or-8-stem-black Brand: Mahr FederalColor: BlackFeatures: MarCator. The New Generation Digital Indicators with MarConnect and The Reference-System. Use with MarCom for the most cost effective data collection measuring systemMarConnect Digital Output allows to choose alternately between: USB, OPTO RS-232 or Digitmatic formatMarCator Digital Indicators are equipped with the innovative Reference-System. The zero position just has to be set once and remains stored for all further measurementsFunctions include: ON/OFF, RESET, mm/inch, Reverse direction, PRESET, TOL (Enter tolerance limit values), ABS, (Tolerance GO / NO GO display mode, DATA send, FactorPublisher: Mahr FederalRelease Date: 2017-03-12Details: Mahr Federal MarCator 1086 R Digital Indicator, with MarConnect has 0 to 1" (0 to 50mm) measuring range with selectable resolution to 0.00002" (0.0005mm) for precision results. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB Hubs Simply send your measured data without being caught up between cables directly into Microsoft Office Excel or via a keyboard code into any Windows program. MarCator Digital Indicators with the R... shopify_US_849824251951 new 515.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31gTriWzMdL_grande.jpg?v=1528151845 Mahr Federal Dimensional Measurement yes 712155480773 0.0 kg Mitutoyo 960-613 Precision Level, 0.00024" /12" Sensitivity https://jumboindustrial.com/products/mitutoyo-960-613-precision-level-0-00024-12-sensitivity-1 Brand: MitutoyoFeatures: High precision longitudinal and transverse vials make it possible to check or level surfacesFeatures all essential specifications required for versatile height standard0.00024 In/12 In SensitivityPublisher: Mitutoyo America CorporationDetails: Mitutoyo Precision Level 960-613, 0.00024 In/12 In Sensitivity.EAN: 4946368401270 shopify_US_849824055343 new 442.32 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_ef88eff4-516c-4dcb-a669-87008155e25b_grande.jpg?v=1528151846 Mitutoyo Dimensional Measurement yes 4946368401270 0.0 kg INTERAPID Dial Test Indicators 312B https://jumboindustrial.com/products/interapid-dial-test-indicators-312b Brand: Brown andamp; SharpeFeatures: 41714 DIAL TEST INDICATOR 312B-3VBROWN AND SHARPE PRECISION137-74.111957Publisher: Brown andamp; Sharpe PrecisionDetails: 137-74.111957 Features: -Dovetail and adjustable stem adaption. -Magnetic resistance. -Swiss made, two-way action - no reversing lever. -Price is for 1 Each. Product Type: -Gauges. Dimensions: Overall Product Weight: -0.14 Pounds.UPC: 706398170027EAN: 0706398170027 shopify_US_849824022575 new 539.95 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41dFQeU2K9L_c5693ba5-d4c4-4e28-8046-6895b59dd7af_grande.jpg?v=1528151846 Brown & Sharpe Dimensional Measurement yes 706398170027 0.0 kg Johnson Level 40-6242 GreenBrite Laser Presicion Level, Yellow https://jumboindustrial.com/products/johnson-level-40-6242-greenbrite-laser-presicion-level-yellow Brand: Johnson LevelColor: YellowFeatures: Lasers read up to 100 feet with bright red beam laser dotsTurn the laser on by turning the battery cap switch. Laser has solid aluminum frame with a one piece case design that will not bend or twist and is weather protectedRecessed level vials are easy to read but well protectedsolid brass end caps provide for years of trouble free serviceWedge prisms factory calibrated no field adjustments requiredLaser Class Il, Power output ≤1mWPublisher: Johnson Level andamp; ToolWarranty: 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.Details: 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.UPC: 049448062423EAN: 0049448062423 shopify_US_849823596591 new 570.98 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/210uIVU49EL_grande.jpg?v=1528151847 Johnson Level Dimensional Measurement yes 049448062423 0.0 kg INSIZE 1136-502 Electronic Caliper, 0-500 mm/0-20" https://jumboindustrial.com/products/insize-1136-502-electronic-caliper-0-500-mm-0-20 Brand: INSIZEFeatures: Resolution: 0. 01Mm/0. 0005 inchButton function: on/off, zero, mm/inch, abs, data presetBattery Cr2032. Data outputMade of stainless steelPublisher: INSIZERelease Date: 2017-03-12Details: Electronic caliper, 0-500mm/0-20".EAN: 6928640301575 shopify_US_849823531055 new 540.80 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31LI7KlR-sL_grande.jpg?v=1528151847 INSIZE Dimensional Measurement yes 6928640301575 0.0 kg Disc Micrometer, 1-2 In, 0.001 In Res https://jumboindustrial.com/products/disc-micrometer-1-2-in-0-001-in-res Publisher: StarrettUPC: 094713865025EAN: 0094713865025 shopify_US_849821302831 new 584.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21UWY0HTeIL_grande.jpg?v=1528151849 Starrett Dimensional Measurement yes 094713865025 0.0 kg Starrett 439-18 Builders Combination Tool https://jumboindustrial.com/products/starrett-439-18-builders-combination-tool Brand: StarrettFeatures: This versatile tool is invaluable for carpenters, builders, patternmakers, cabinetmakers and all mechanicsCombines seven tool functions in one compact, practical unit, it is a rule, square, level, plumb, protractor, bevel and pitch-to-foot indicatorIt consists of a stock, 9" (230mm) long, a hardened, machine-divided 1-1/2" (38 mm) wide blade in 18" or 24" lengths, and a protractorOn one side the protractor is graduated from zero to 90 degree in both directions showing the direct and supplementary angles, the other side is graduated in 1/2" pitch increments from 0-12" per foot pitchThe stock has four levels which permits leveling or plumbing the work in relation to any angle or pitchThe stock is 9-Inch long and the 1-1/2-Inch wide blade is hardened and machine dividedOn one side the protractor is graduated from zero to 90-Degrees in both directions. This gives the direct and supplementary angles. The other side is graduated in 1/2-Inch pitch increments from 0-Inch to 12-Inch per foot pitchIdeal for laying out or cutting valleys or hips of different pitchIt is a rule, square, level, plumb, protractor, bevel and pitch to foot indicatorPublisher: StarrettDetails: Tool is ideal for laying out or cutting valleys or hips of different pitches, done as follows: Rotate the blade to the desired pitch, place the face of the stock against the work and draw a line. Then place the square end of the stock against the line and draw the complementary line. This... shopify_US_849821171759 new 451.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/413s0mAcC4L_grande.jpg?v=1528151849 Starrett Dimensional Measurement yes 049659521108 0.0 kg Starrett V1212MXRL Stainless Steel Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 25-50mm Range, 0.001mm Graduation, +/-0.002" Accuracy https://jumboindustrial.com/products/starrett-v1212mxrl-stainless-steel-micrometer-ratchet-stop-lock-nut-carbide-faces-25-50mm-range-0-001mm-graduation-0-002-accuracy Brand: StarrettFeatures: EDP 64264with Ratchet Stop, Lock Nut, and Carbide FacesPublisher: StarrettDetails: Starrett Micrometer Part # 64264 V1212MXRL This micrometer is made from stainless steel for use under adverse atmospheric and operating conditions. Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.UPC: 049659642643EAN: 0049659642643 shopify_US_849820123183 new 543.47 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31IZWe0PChL_grande.jpg?v=1528151850 Starrett Dimensional Measurement yes 049659642643 0.0 kg Mitutoyo 511-817 Dial Bore Gage, 400-600 mm, 0.01 mm Graduation, Stem Diameter 8 mm with 2046SB Dial Indicator https://jumboindustrial.com/products/mitutoyo-511-817-dial-bore-gage-400-600-mm-0-01-mm-graduation-stem-diameter-8-mm-with-2046sb-dial-indicator Brand: MitutoyoFeatures: Carbide-tipped contact points for durabilityThe dial indicator is fully protected by a rugged coverOptional extension rods can be attached for measuring deep holesPublisher: Mitutoyo America CorporationDetails: Mitutoyo Dial Bore Gage 511-817, 400-600mm with2046SB dial indicator, 0.01mm graduation, stem 8mm diam.EAN: 4946368613147 shopify_US_849819959343 new 1,391.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/318i_2BFFWSOL_grande.jpg?v=1528151851 Mitutoyo Dimensional Measurement yes 4946368613147 0.0 kg Mitutoyo 510-121 Dial Indicating Micrometer, Ratchet Stop, 0-25mm Range, 0.001mm Graduation, +/-0.001mm Accuracy, Retractable Anvil Button https://jumboindustrial.com/products/mitutoyo-510-121-dial-indicating-micrometer-ratchet-stop-0-25mm-range-0-001mm-graduation-0-001mm-accuracy-retractable-anvil-button Brand: MitutoyoFeatures: Dial indicator for Go/No-Go (GO/NG) tolerance inspection in metric unitsVernier scale in metric units for taking precise outside diameter (OD) measurementsRatchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementRated IP54 for resistance to penetration by dust and splashing liquidCarbide facing on spindle and anvil provides wear resistancePublisher: MitutoyoDetails: The Mitutoyo 510 series dial indicating micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a dial gage for Go/No-Go (GO/NG) tolerance inspection, a ratchet-stop mechanism for uniform pressure during adjustment, and carbide faces for wear resistance.The vernier scale on the thimble and sleeve is graduated to 0.001mm, with a satin chrome rust- and glare-resistant finish. The dial indicator gage is graduated to 0.001mm, and has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The anvil retracts for quick workpiece insertion or release. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are transl... shopify_US_849819664431 new 831.04 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31yZ1fn8FzL_grande.jpg?v=1528151851 Mitutoyo Dimensional Measurement yes 4946368386218 0.0 kg Mitutoyo 116-800 Interchangeable Anvils Set For Pana Micrometer, 7 Pieces https://jumboindustrial.com/products/mitutoyo-116-800-interchangeable-anvils-set-for-pana-micrometer-7-pieces Brand: MitutoyoFeatures: Optional accessories for pana micrometerPublisher: MitutoyoRelease Date: 2017-05-15Details: The Interchangeable anvils set includes flat anvils, spline anvils, spherical anvils, point anvils, knife-edge anvils, disk anvils and blade anvils.EAN: 4946368011448 shopify_US_849818910767 new 484.91 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/418jjxVpFcL_grande.jpg?v=1528151852 Mitutoyo Dimensional Measurement yes 4946368011448 0.0 kg Mitutoyo 193-923 Digit Outside Micrometer Set, 0-3" Range, 0.0001" Graduation, +/-0.0001" Accuracy (3 Piece Set) https://jumboindustrial.com/products/mitutoyo-193-923-digit-outside-micrometer-set-0-3-range-0-0001-graduation-0-0001-accuracy-3-piece-set Brand: MitutoyoFeatures: Mechanical digit counter with 0.01mm or 0.001" reading for quick and error-free readingWith standard bar except for 0-25mm/0-1" modelSupplied in fitted plastic casePublisher: MitutoyoDetails: 0.6 Micrometer/0.000024 inches flatness, (2+R/100)µm, R=max. range (mm) parallelism, carbide tipped measuring faces.EAN: 4946368051185 shopify_US_849818877999 new 513.43 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41vp5Icz5_2BL_grande.jpg?v=1528151852 Mitutoyo Dimensional Measurement yes 4946368051185 0.0 kg 22P Handheld Thickness Gage .100 inch range https://jumboindustrial.com/products/22p-handheld-thickness-gage-100-inch-range-1 Brand: Mahr FederalFeatures: Indicator built into gage frame for maximum ruggednessLift lever for one hand operationContinuous reading dials with revolution counter for absolute measurement of thin materials6.3mm / .25 inch diameter, flat contactsPublisher: Mahr FederalDetails: .500" Hand Held Thickness gageUPC: 797734646559EAN: 0797734646559 shopify_US_849816715311 new 550.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/319MA2_2BjIOL_2f67592e-79de-422b-bfb2-32f9f0078c86_grande.jpg?v=1528151862 Mahr Federal Dimensional Measurement yes 797734646559 0.0 kg Starrett 823DZ Tubular Inside Micrometer Set, 4-to-32-Inch Range https://jumboindustrial.com/products/starrett-823dz-tubular-inside-micrometer-set-4-to-32-inch-range Brand: StarrettFeatures: 1-Inch movement of screw4-to-32-Inch range8-Rods included with setExtremely rigid, lightweight measuring rodsQuick reading figuresPublisher: StarrettWarranty: 1-YearDetails: Highly useful for internal linear measurements such as measuring cylinders, rings, setting calipers and parallel surfaces.UPC: 049659530551EAN: 0049659530551 shopify_US_849815928879 new 550.95 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51n7xMPlbmL_grande.jpg?v=1528151864 Starrett Dimensional Measurement yes 049659530551 0.0 kg Mitutoyo 126-810 Anvil-Spindle Tip Set For Whitworth Screws, 55 degree Threads, 10 Pieces https://jumboindustrial.com/products/mitutoyo-126-810-anvil-spindle-tip-set-for-whitworth-screws-55-degree-threads-10-pieces Brand: MitutoyoPublisher: MitutoyoDetails: The set includes size from 60-48TPI, 48-40TPI, 40-32TPI, 32-24TPI, 24-18TPI, 18-14TPI, 14-10TPI, 10-7TPI, 7-4.5TPI and 4.5-3.5TPI.EAN: 4946368016078 shopify_US_849815175215 new 589.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31nUK_2BOqxPL_grande.jpg?v=1528151864 Mitutoyo Dimensional Measurement yes 4946368016078 0.0 kg Mitutoyo 137-205 Tubular Vernier Inside Micrometer, Extension Rod Type, 50-1500mm Range, 0.01mm Graduation, -0.043mm Accuracy, 10 pcs Ext... https://jumboindustrial.com/products/mitutoyo-137-205-tubular-vernier-inside-micrometer-extension-rod-type-50-1500mm-range-0-01mm-graduation-0-043mm-accuracy-10-pcs-extension-rods Brand: MitutoyoFeatures: Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfacesVernier scale in metric units for taking precise inside dimension (ID) measurementsIncludes interchangeable extension rods for a diversified range of measurementSlow head travel helps provide fine positioningSolid extension rods help provide durabilityPublisher: MitutoyoDetails: The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in metric units for taking precise ID measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 13mm per revolution that helps provide fine positioning. The solid extension rods help provide durability. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, wid... shopify_US_849815044143 new 699.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/418MQKlR31L_grande.jpg?v=1528151864 Mitutoyo Dimensional Measurement yes 4946368438368 0.0 kg INSIZE ISL-A1-850 Linear Scale, 34"/850 mm, Resolution 0.00005" https://jumboindustrial.com/products/insize-isl-a1-850-linear-scale-34-850-mm-resolution-0-00005 Brand: INSIZEFeatures: Resolution 00005 inchScale grating pitch 787μin. Scale reference point pitch 1.97 inchAccuracy: ±(197+5l)μin, l is the effective length in inchCable length: 140" (l: 2-38"), 200" (l: 40-60"), 400" (l: 64-80")Publisher: INSIZEDetails: Linear scale, 34"/850mm, resolution 00005".EAN: 6928640321849 shopify_US_849814913071 new 629.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ngQYw_2BC6L_77d09eb5-3dfe-4ef6-8b14-0313d64968b8_grande.jpg?v=1528151865 INSIZE Dimensional Measurement yes 6928640321849 0.0 kg Mitutoyo ABSOLUTE 573-751 Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, Neck Style Jaw, 0-6" Range, +/-0.0015" Accuracy... https://jumboindustrial.com/products/mitutoyo-absolute-573-751-digital-caliper-stainless-steel-battery-powered-inch-metric-neck-style-jaw-0-6-range-0-0015-accuracy-0-0005-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper componentsFlat type jaws for outside dimension (OD) measurements of grooves and recessesFunction control buttons on caliper face for ease of access: Origin-set, Zero-setting, Inch/Metric, Power On/Off, Data OutputIP67-certified for protection against dust and temporary submersion in waterStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerPublisher: MitutoyoDetails: The Mitutoyo 573 series digital neck caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has flat type jaws for outside dimension (OD) measurements of grooves and recesses. This caliper has accessible function control buttons, and uses both inch and metric measuring systems. The LCD helps increase readability. The 573 series caliper has the ABSOLUTE electrostatic capacitance type linear encoder to help reduce overspeed errors. LCD resolution is 0.0005" (0.01mm). Functions include origin-setting, zero-setting, inch/metric conversion, power on/off automatic shutoff, and data output. This caliper is Ingress Protection 67 (IP67)-certified, helping ensure that the electronic components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. . An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has ... shopify_US_849814847535 new 570.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31LSaD_2BPfiL_grande.jpg?v=1528151865 Mitutoyo Dimensional Measurement yes 4946368567624 0.0 kg Mitutoyo 395-364 LCD Tube Micrometer, Cylindrical Anvil, Ratchet Stop, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.00015" Accu... https://jumboindustrial.com/products/mitutoyo-395-364-lcd-tube-micrometer-cylindrical-anvil-ratchet-stop-0-1-0-25-4mm-range-0-00005-0-001mm-graduation-0-00015-accuracy-8-2mm-dia-cylindrical-tip Brand: MitutoyoFeatures: Vertical anvil (pin, spherical, or cylindrical) for measuring tubing wall thicknessDigital, single-value readout LCD displays in inches and metric units for readabilityStatistical Process Control (SPC) output transmits results to a computer through an interface cable (sold separately)Rated IP65 for resistance to penetration by dust and liquid up to the force of a low-pressure water jetCarbide facing on spindle and anvil provides wear resistancePublisher: MitutoyoDetails: The Mitutoyo 395 series LCD tube micrometer has a vertical anvil for measuring tubing wall thickness. It also has a digital single-value LCD readout that displays in inches and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurement at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle has a flat measuring face that is carbide-tipped for wear res... shopify_US_849814683695 new 523.65 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31LCrVSqMuL_grande.jpg?v=1528151866 Mitutoyo Dimensional Measurement yes 603908383666 0.0 kg Mitutoyo 314-362-30 VM3-1"PMX V-Anvil Micrometer, 0.4"-1", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-314-362-30-vm3-1pmx-v-anvil-micrometer-0-4-1-0-00005-0-001-mm Brand: MitutoyoFeatures: Measures the outside diameter of cutting tools with an odd number of flutesWith ratchet stop for constant forceWith SPC outputPublisher: MitutoyoRelease Date: 2017-05-15Details: Mitutoyo 314-362-30 VM3-1"PMX, Micrometer, V-Anvil, 3-Flute,.4-1",.00005"/0.001 mm.EAN: 4946368695679 shopify_US_849814585391 new 637.34 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51B5avyO1pL_grande.jpg?v=1528151866 Mitutoyo Dimensional Measurement yes 4946368695679 0.0 kg Starrett 25-5041J Dial Indicator, Long Range, 0.375" Stem Dia., Lug-on-Center Back, White Dial, 0-100 Reading, 2.25" Dial Dia., 0-5" Rang... https://jumboindustrial.com/products/starrett-25-5041j-dial-indicator-long-range-0-375-stem-dia-lug-on-center-back-white-dial-0-100-reading-2-25-dial-dia-0-5-range-0-001-graduation Brand: StarrettColor: WhiteFeatures: 0.001" increments for precise measurements and continuous-reading double dial with direct-reading count hands0 to 100 counter with one revolution equivalent to 0.1", jeweled bearingsLug-type dial back for mounting dial indicatorWhite-face dial with scratch-resistant crystal face for ease of readingMeets American Gage Design standards for dimensions and operationPublisher: StarrettWarranty: ManufacturerDetails: The Starrett 25 or 655 series dial indicator has 0.001" increments for precise measurements and continuous-reading double dials with direct-reading count hands. It has a 0 to 100 counter with one revolution equivalent to 0.1", and jeweled bearings for smooth operation. The white-face dial with scratch-resistant crystal face is easy to read. It has a lug-type dial back for mounting and meets American Gage Design standards for dimensions and operation. The dial indicator has a stainless-steel stem with a hardened steel spindle for durability, and is suitable for applications such as quality control for machined parts.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or tran... shopify_US_849814126639 new 580.93 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31wpvLYZIdL_grande.jpg?v=1528151867 Starrett Dimensional Measurement yes 049659533125 0.0 kg Mitey Miter Miter Saw Bevel Gauge - Protractor Angle Finder8211; Crown Molding Jig8211; Construction Layout Tool https://jumboindustrial.com/products/mitey-miter-miter-saw-bevel-gauge-protractor-angle-finder8211-crown-molding-jig8211-construction-layout-tool Brand: Mitey MiterFeatures: GREATEST MITER TOOL EVER - transfers inside and outside corner angles to your miter saw so you can cut the perfect angle for a perfect fitting joint (works with both base and crown moldings)EASY AND FAST- adjust the angle, place on saw, align and cut - that's itREDUCES ERRORS andamp; PREVENTS WASTE - precise measurements that provide exact miter cuts for 60 to 300 degree corners (both inside and outside)SAVES TIME - no charts, tables, calculators, mathematical formulas or tedious copingMADE IN U.S.A. - lightweight, heavy-duty stainless steel, 16GA constructionPublisher: Mitey MiterDetails: Q: Why was the Mitey Miter Tool developed? A: The Mitey Miter Tool was developed to offer a tool that simplifies miter cuts. By using the Mitey Miter Tool you will save time, money, and reduce wasted material. Q: What does the Mitey Miter Tool do? A: The Mitey Miter Tool measures and divides any angle achieving an accurate fitting miter joint without using math or calculations. Q: What is a Miter Joint? A: A miter joint is the most common joint between two pieces of material that meet at an angle, in which each piece of the butting surface is cut into two equal halves. Q: Who can use the Mitey Miter Tool? A: Homeowners, Re-modelers, Contractors, Deck Builders, Metalworkers, Finish Carpenters, Tile/marble installers, and Framers (anyone who needs to measure and divide an angle). Q: Why should I use the Mitey Miter Tool? A: The purpose of the Mitey Miter To... shopify_US_849813110831 new 559.69 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31x8GGq5NZL_grande.jpg?v=1528151869 Mitey Miter Dimensional Measurement yes 7107383727166 0.0 kg INSIZE 4141-400 Granite Square, 15.7" x 9.8" https://jumboindustrial.com/products/insize-4141-400-granite-square-15-7-x-9-8 Brand: INSIZEFeatures: 15.7" x 9.8"1.575 inchHole in center of squarePublisher: INSIZEDetails: Granite square, 15.7x9.8".EAN: 6928640320484 shopify_US_849812815919 new 643.89 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41aYpStM2wL_d5a75af7-3fd4-4fee-8983-83aefebb0f4e_grande.jpg?v=1528151869 INSIZE Dimensional Measurement yes 6928640320484 0.0 kg INSIZE ISL-DR3 Counter https://jumboindustrial.com/products/insize-isl-dr3-counter Brand: INSIZEFeatures: Application three-axisScale input ports 3Resolution: 000002" 000005" 00001" 00002" 00005'' 0001'' 0002'' 0005'' 001'' 002''Publisher: INSIZEDetails: Counter.EAN: 6928640322396 shopify_US_849811210287 new 622.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41mgiwgb6tL_grande.jpg?v=1528151871 INSIZE Dimensional Measurement yes 6928640322396 0.0 kg Stanley Tools 33-212 48 Pack 12ft. Powerlock Tape Rule https://jumboindustrial.com/products/stanley-tools-33-212-48-pack-12ft-powerlock-tape-rule Brand: Stanley ToolsFeatures: Cast-metal case is durable and suitable for heavy-duty useMylar polyester film extends life of entire bladeSecure blade lock won't creep during measurements16" and 19.2" stud center markings simplify framing jobsCorrosion-resistant Tru-zero end hook for accurate measurementsPublisher: Stanley ToolsWarranty: ...Details: Stanley Tools 33-212 48 Pack 12ft. Powerlock Tape RuleUPC: 076174332124EAN: 0076174332124 shopify_US_849810391087 new 379.97 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41tJu6yhf4L_grande.jpg?v=1528151873 Stanley Tools Dimensional Measurement yes 076174332124 0.0 kg Prism Traverse Backsight Kit Total Station Survey https://jumboindustrial.com/products/prism-traverse-backsight-kit-total-station-survey Brand: UnknownFeatures: Kit includes a 62-mm prism with silver-coated canister (#6400-10)Prism has shopify_US_849809899567 new 387.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41w0e3FQFFL_grande.jpg?v=1528151873 Dimensional Measurement no 0.0 kg 5"-16 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-16-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5"-16 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5"-16 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769022033EAN: 0763769022033 shopify_US_849809571887 new 567.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_d1edefb6-97df-43aa-8157-0368eb57f1d8_grande.jpg?v=1528151874 Linsen Dimensional Measurement yes 763769022033 0.0 kg INSIZE 4147-500A Granite Straight Edge, Length 20" https://jumboindustrial.com/products/insize-4147-500a-granite-straight-edge-length-20 Brand: INSIZEFeatures: 20 inch3.150 inch1.969 inchPublisher: INSIZEDetails: Granite straight edge, length 20 inch.EAN: 6928640320507 shopify_US_849809408047 new 653.32 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31zBCihMFYL_6174e456-9fab-47b2-9e15-204c19403a92_grande.jpg?v=1528151875 INSIZE Dimensional Measurement yes 6928640320507 0.0 kg Interapid Dial Test Indicators Dial Test Indicator 312B https://jumboindustrial.com/products/interapid-dial-test-indicators-dial-test-indicator-312b Brand: Brown andamp; SharpeFeatures: DIAL TEST INDICATOR 312BBROWN AND SHARPE PRECISION137-74.111958Publisher: Brown andamp; Sharpe PrecisionDetails: 137-74.111958 Features: -Dovetail and adjustable stem adaption. -Magnetic resistance. -Swiss made, two-way action - no reversing lever. -Graduation(s): .0005 in. Product Type: -Gauges. Dimensions: Overall Product Weight: -0.4 Pounds.UPC: 706398170034EAN: 0706398170034 shopify_US_849808818223 new 569.95 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41dFQeU2K9L_grande.jpg?v=1528151876 Brown & Sharpe Dimensional Measurement yes 706398170034 0.0 kg Mitutoyo 293-355-30 MDC-10 MX Micrometer, IP65, 9"-10", 0.0001"/0.001 mm https://jumboindustrial.com/products/mitutoyo-293-355-30-mdc-10-mx-micrometer-ip65-9-10-0-0001-0-001-mm Brand: MitutoyoFeatures: Measurement data output function is available with a water-resistant connection cableAuto power ON/OFF functionCertificate of inspection is includedPublisher: MitutoyoDetails: Mitutoyo 293-355-30 MDC-10"MX, Micrometer, 9-10",.0001"/0.001 mm, IP65.EAN: 4946368695556 shopify_US_849807474735 new 588.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41lM8qi7pSL_grande.jpg?v=1528151878 Mitutoyo Dimensional Measurement yes 4946368695556 0.0 kg Mitutoyo 342-354-30 CPM15-4 MX Point Micrometer, IP65, 15 Degree, 3"-4", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-342-354-30-cpm15-4-mx-point-micrometer-ip65-15-degree-3-4-0-00005-0-001-mm Brand: MitutoyoFeatures: Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions18 degree and 30 degree measuring points are availableIP65 water/dust protectionThe measuring points have approximately 0.3mm / .012" radiusPublisher: MitutoyoRelease Date: 2017-05-15Details: Mitutoyo 342-354-30 CPM15-4"MX, Micrometer, Point, 15°, 3-4",.00005"/0.001 mm, IP65.UPC: 603908597476EAN: 0603908597476 shopify_US_849807343663 new 588.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/5113eiaPUvL_grande.jpg?v=1528151878 Mitutoyo Dimensional Measurement yes 603908597476 0.0 kg Mitutoyo 342-364-30 CPM30-4 MX Point Micrometer, IP65, 30 Degree, 3"-4", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-342-364-30-cpm30-4-mx-point-micrometer-ip65-30-degree-3-4-0-00005-0-001-mm Brand: MitutoyoFeatures: Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions22 degree and 30 degree measuring points are availableIP65 water/dust protectionThe measuring points have approximately 0.3mm / .012" radiusPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 342-364-30 CPM30-4"MX, Micrometer, Point, 30°, 3-4",.00005"/0.001 mm, IP65.UPC: 603908597506EAN: 4946368689159 shopify_US_849807212591 new 545.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41OQDR8MDuL_grande.jpg?v=1528151878 Mitutoyo Dimensional Measurement yes 603908597506 0.0 kg TemaHome Berlin 4 Levels Bookcase 150 Cm | Pure White https://jumboindustrial.com/products/temahome-berlin-4-levels-bookcase-150-cm-pure-white Brand: Tema HomeFeatures: Matte white finishPanels made of honeycomb inlay framed with chipboard and encased in an MDF shell that is veneered orFinished on front and backSpecificationsColor: Pure WhiteSize: 70 cmPublisher: Tema HomeDetails: Features. Matte white finish. Panels made of honeycomb inlay framed with chipboard and encased in an MDF shell that is veneered or painted which reduces weight but increases durability and strength . Finished on front and backSpecifications. Color Pure White. Size 70 cmEAN: 5603449320736 shopify_US_849806950447 new 622.00 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41DZ1oJeOgL_grande.jpg?v=1528151879 Tema Home Dimensional Measurement yes 5603449320736 0.0 kg Mitutoyo 317-251-30 ACM-25MX Micrometer, IP65, Uni-Mike, 0.001 mm https://jumboindustrial.com/products/mitutoyo-317-251-30-acm-25mx-micrometer-ip65-uni-mike-0-001-mm Brand: MitutoyoFeatures: Supplied with Flat anvil and Rod anvilWith special Disk Anvils. Can be used as a height micrometer. The disks have lapped, mirror surfaceWith Ratchet Stop for constant measuring forcePublisher: MitutoyoDetails: Mitutoyo 317-251-30 ACM-25MX, Micrometer, Uni-Mike, 0-25 mm, 0.001 mm, IP65.EAN: 4946368688800 shopify_US_849806458927 new 540.41 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41WNNlHteGL_grande.jpg?v=1528151880 Mitutoyo Dimensional Measurement yes 4946368688800 0.0 kg Mitutoyo ABSOLUTE 573-704 Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, Offset Jaw, 0-12" Range, +/-0.0015" Accuracy, 0... https://jumboindustrial.com/products/mitutoyo-absolute-573-704-digital-caliper-stainless-steel-battery-powered-inch-metric-offset-jaw-0-12-range-0-0015-accuracy-0-0005-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper componentsMain scale jaw slides up and down to allow for measurement of hard-to-access stepped sectionsIP67-rated for protection against dust and temporary submersion in waterFunction control buttons on caliper face for ease of access: Origin-set, Zero-setting, Inch/Metric, Power On/Off, Data OutputStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerPublisher: MitutoyoDetails: The Mitutoyo 573 series ABSOLUTE Digimatic offset digital caliper has a sliding main scale jaw for measurement of step sections and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Inch/Metric, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability. The 573 series caliper has the ABSOLUTE electrostatic capacitance type linear encoder to help reduce overspeed errors. LCD resolution is 0.0005” (0.01mm). Functions include Origin-setting, Zero-setting, and Power On/Off automatic shutoff. This caliper is Ingress Protection 67 (IP67)-certified, which means that the electronic components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. An alarm alerts the user to low v... shopify_US_849805705263 new 597.05 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/318t4KT1RjL_grande.jpg?v=1528151882 Mitutoyo Dimensional Measurement yes 4946368585444 0.0 kg Mitutoyo 422-233-30 BLM-100MX Blade Micrometer, Type A, 75 mm-100 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-422-233-30-blm-100mx-blade-micrometer-type-a-75-mm-100-mm-0-001-mm Brand: MitutoyoFeatures: The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard to reach areasSpeedy spindle feed of .4 In/10mm/revWith Ratchet Stop for constant measuring forceNon-rotating spindle eliminates torque on work pieceWith a standard barPublisher: MitutoyoDetails: Mitutoyo 422-233-30 BLM-100MX, Micrometer, Blade, Type A, 75-100 mm, 0.001 mm.EAN: 4946368689883 shopify_US_849805377583 new 948.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31VBuIyBqRL_grande.jpg?v=1528151882 Mitutoyo Dimensional Measurement yes 4946368689883 0.0 kg Fowler Sylvac Mark VI Electronic Bluetooth Indicator, 54-530-355-0, 0-1.000"/25mm Measuring Range, 0.00005"/.001mm Resolution, 0.00016"/.... https://jumboindustrial.com/products/fowler-sylvac-mark-vi-electronic-bluetooth-indicator-54-530-355-0-0-1-000-25mm-measuring-range-0-00005-001mm-resolution-0-00016-004mm-accuracy Brand: FowlerColor: GreyFeatures: Fowler Sylvac Mark VI 1"/25mm lifetime warranty electronic bluetooth indicator with AGD Group 2 face and 0.00005"/0.001mm resolution, designed for taking measurements in machining, layout, and inspection workNon-contact scale inductive measuring system has no moving parts and is insensitive to dust, dirt, oils and electrical or magnetic interferenceStainless steel shank and spindle, 4-48 UNF threaded contact point, aluminum housing with lug back, 3/8" mounting stem is Ingress Protection (IP)-67 rated for protection against water, coolant, oil, and dustHigh-contrast LCD with tolerance indicators, minimum, maximum, Total Indicator Reading (TIR), display hold that retains reading for recording, and floating zero allows the indicator to be set to zero at any spindle locationStatistical Process Control (SPC) data collection with wireless output transfers data to a computerPublisher: FowlerDetails: The Fowler Sylvac Mark VI electronic indicator has a 2-1/4" diameter high-contrast LCD with 0-1”/0-25mm measuring range, four user-selectable resolutions of 0.00005", 0.0005", 0.001mm, and 0.01mm, a non-contact indicative measuring system, polyamide housing with a stainless steel shank and spindle, a 3/8" stem diameter, and a carbide contact point. The indicator performs inch/metric conversions, has a measuring speed of 1.5m/60" per second, and a repeatability of 2μm. The non-contact scale inductive measuring system has no moving parts and is ins... shopify_US_849804951599 new 715.90 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41QjlKUd88L_grande.jpg?v=1528151882 Fowler Dimensional Measurement yes 646795174160 0.0 kg Mitutoyo 293-356-30 MDC-11 MX Micrometer, IP65, 10"-11" https://jumboindustrial.com/products/mitutoyo-293-356-30-mdc-11-mx-micrometer-ip65-10-11 Brand: MitutoyoFeatures: Measurement data output function is available with a water-resistant connection cableAuto power ON/OFF functionCertificate of inspection is includedPublisher: MitutoyoDetails: Mitutoyo 293-356-30 MDC-11"MX, Micrometer, 10-11",.0001"/0.001 mm, IP65.EAN: 4946368695563 shopify_US_849804656687 new 592.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51degygj7zL_grande.jpg?v=1528151883 Mitutoyo Dimensional Measurement yes 4946368695563 0.0 kg 5 5/8-12 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-5-8-12-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 5/8-12 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 5/8-12 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769022279EAN: 0763769022279 shopify_US_849804492847 new 576.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_52e2b8e0-806b-4fc6-9ab9-a52f3bcff205_grande.jpg?v=1528151883 Linsen Dimensional Measurement yes 763769022279 0.0 kg Fowler 52-224-104 Inch Outside Digit Micrometer Set, 0-4" Measuring Range, 0.0001" Graduation, Set of 4 https://jumboindustrial.com/products/fowler-52-224-104-inch-outside-digit-micrometer-set-0-4-measuring-range-0-0001-graduation-set-of-4 Brand: FowlerFeatures: Outside micrometer set with a 0 to 4" measuring range and flat anvil/spindle pair with 0.256" diameter measuring face for general purpose measuring, set of fourDigit display has 0.001" graduations and Vernier scale to 0.0001" and an accuracy of 0.00016" for precise readingsHardened and precision-ground anvil and spindle have micro-lapped carbide measuring faces with 0.00005" parallelism on 0 to 1" micrometers and 0.00003" flatness for accurate measurementsHardened, ground and lapped spindle thread provides smooth movement, accuracy, and long lifeRatchet stop applies constant force for repeatability between usersPublisher: Fred V. Fowler Company, Inc.Details: Fowler 52-224-104 inch digit micrometer set has a 0 to 4" measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary Vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00016" for precise readings. Microfine graduations on satin chrome finish provide clear reading, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. The spindle thread is hardened, grou... shopify_US_849803739183 new 270.42 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/418ZZH_2BOTnL_grande.jpg?v=1528151885 Fowler Dimensional Measurement yes 646795105096 0.0 kg AdirPro 360° Prism for Leica, Topcon, Sokkia, Nikon Total Stations 720-08 - With Padded Case, Glass Protector and Pole Adapter https://jumboindustrial.com/products/adirpro-360-prism-for-leica-topcon-sokkia-nikon-total-stations-720-08-with-padded-case-glass-protector-and-pole-adapter Brand: AdirProFeatures: Metal casings on top and bottomOverall accuracy 5mm ( shopify_US_849803313199 new 499.95 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Xedgb1VGL_grande.jpg?v=1528151886 Dimensional Measurement no 0.0 kg Mitutoyo 116-106 Pana Micrometer, Ratchet Stop, 1-2" Range, 0.001" Graduation, +/-0.0002" Accuracy https://jumboindustrial.com/products/mitutoyo-116-106-pana-micrometer-ratchet-stop-1-2-range-0-001-graduation-0-0002-accuracy Brand: MitutoyoFeatures: For use with anvil and spindle inserts for a variety of applications (sold separately)Vernier scale in inch units for taking precise outside diameter (OD) measurementsRatchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementsSatin chrome finish on thimble and sleeve helps resist rust and reduce glareSpindle and anvil locks to hold measurements in placePublisher: MitutoyoDetails: The Mitutoyo 116 series Pana micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and is for use with interchangeable anvil and spindle inserts for a variety of applications (sold separately). It also has a ratchet-stop mechanism for uniform pressure during adjustment, and a non-rotating spindle that helps provide steady positioning during measurement.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. Separate spindle and anvil locks help provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outsid... shopify_US_849802231855 new 538.47 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_1d6b31c2-4449-4096-b10d-418095433364_grande.jpg?v=1528151887 Mitutoyo Dimensional Measurement yes 4946368011370 0.0 kg Brown and Sharpe TESA 0081720353 Measuring Head for Alesometer Capacitive Micrometer System, 8-10mm Measuring Range https://jumboindustrial.com/products/brown-sharpe-tesa-0081720353-measuring-head-for-alesometer-capacitive-micrometer-system-8-10mm-measuring-range Brand: TESA Brown andamp; SharpeFeatures: With Tesa alesometer capa micrometer system with digital display partial sets plus componentsPublisher: Hexagon MetrologyDetails: Brown andamp; Sharpe TESA MEASURING HEAD 8-10UPC: 622419216263EAN: 0622419216263 shopify_US_849801740335 new 581.90 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ZQ6nE6niL_grande.jpg?v=1528151889 TESA Brown & Sharpe Dimensional Measurement yes 622419216263 0.0 kg 3 3/4-8 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/3-3-4-8-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 3 3/4-8 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 3 3/4-8 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021517EAN: 0763769021517 shopify_US_849800527919 new 585.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41u198whlQL_grande.jpg?v=1528151891 Linsen Dimensional Measurement yes 763769021517 0.0 kg 22P Handheld Thickness Gage .100 inch range https://jumboindustrial.com/products/22p-handheld-thickness-gage-100-inch-range Brand: Mahr FederalFeatures: Indicator built into gage frame for maximum ruggednessLift lever for one hand operationContinuous reading dials with revolution counter for absolute measurement of thin materials6.3mm / .25 inch diameter, flat contactsPublisher: Mahr FederalDetails: .100" in Hand Held Thickness gageUPC: 797734646313EAN: 0797734646313 shopify_US_849800265775 new 597.28 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/319MA2_2BjIOL_grande.jpg?v=1528151891 Mahr Federal Dimensional Measurement yes 797734646313 0.0 kg SSEYL ETCR3000B four-wire earth resistance soil resistivity tester precision ground resistance tester https://jumboindustrial.com/products/sseyl-etcr3000b-four-wire-earth-resistance-soil-resistivity-tester-precision-ground-resistance-tester Publisher: ETCRDetails: *Function Measurement of 2/3/4-pole earth resistance, soil resistivity, earth voltage, AC voltage *Power Supply DC 9V(Zi-Mn dry battery R14S 1.5V 6 PCS, continuous standby for 300 hours) *Measurement Range Earth Resistance: 0.00Ω-30.00kΩ Soil Resistivity: 0.00Ωm-9000kΩm *Measuring Mode Precise 4-pole measurement, 3-pole measurement, simple 2-pole measurement *Measuring Method Earth Resistance: rated current change-pole method, measurement current 20mA Max Soil Resistivity: 4-pole measurement (Wenner method) Earth Voltage: average rectification(between P(S)-ES) *Test Frequency 128Hz/111Hz/105Hz/94Hz(AFC) *Short-circuit Test Current AC 20mA max *Open-circuit Test Current AC 40V max *Test Voltage Wave Sine wave *Electrode Distance Range Can be set 1m-100mUPC: 744370590678EAN: 0744370590678 shopify_US_849799348271 new 586.52 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41OMP1-kx-L_grande.jpg?v=1528151892 ETCR Dimensional Measurement yes 744370590678 0.0 kg E-ROBA15B https://jumboindustrial.com/products/e-roba15b Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126963149 shopify_US_849798889519 new 566.05 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31cQ-KMtiML_grande.jpg?v=1528151894 KANON (Nakamura MFG) Dimensional Measurement yes 4582126963149 0.0 kg Mitutoyo 504-571-211-20 6 in. Digimatic Depth Gage https://jumboindustrial.com/products/mitutoyo-504-571-211-20-6-in-digimatic-depth-gage Brand: MitutoyoFeatures: Base and measuring faces are hardened and micro-lappedOptional wider extension base availableSPC data outputManufacturer Parts Warranty Description: PartsPublisher: MitutoyoWarranty: ManufacturerDetails: 6" DIGIMATIC DEPTH GAGEUPC: 094706094951EAN: 0603908351382 shopify_US_849798594607 new 487.65 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/216n8sakv_2BL_grande.jpg?v=1528151894 Mitutoyo Dimensional Measurement yes 094706094951 0.0 kg Mitutoyo 329-350-10 Digital Depth Micrometer, Interchangeable Rod Type, Inch/Metric, 4 x 0.63" Base, 0–6" (0-152.4mm) Range, 0.00005" (0.... https://jumboindustrial.com/products/mitutoyo-329-350-10-digital-depth-micrometer-interchangeable-rod-type-inch-metric-4-x-0-63-base-0-6-0-152-4mm-range-0-00005-0-001mm-resolution Brand: MitutoyoFeatures: Depth micrometer measures 0 to 6.0" (0 to 152.4mm) with 0.00005" (0.001mm) resolution, for measuring depths of holes and other depressionsLCD screen displays in inches and metric unitsRatchet stop to help provide uniform pressure for precise, repeatable measurements, and measuring rod clamp to provide stabilityComes with six flat-tipped, 4mm diameter, interchangeable extension rods depending on the range needed (0 to 1", 0 to 2", 0 to 3", 0 to 4", 0 to 5", and 0 to 6")Base is 4 x 0.63 inches (W x D) for stabilityPublisher: MitutoyoWarranty: ManufacturerDetails: The Mitutoyo 329-350-10 digital depth micrometer is for measuring the depths of holes and other depressions. The micrometer has a measurement range of 0 to 6.0" (0 to 152.4mm) and a resolution of 0.00005" (0.001mm). The LCD screen displays in inches and metric units. This item has a ratchet stop to help provide uniform pressure for precise, repeatable measurements. The measuring rods can be locked for stability. This model comes with six flat-tipped, 4mm diameter, interchangeable extension rods for measuring in different ranges (0 to 1", 0 to 2", 0 to 3", 0 to 4", 0 to 5", and 0 to 6"). The base is 4 x 0.63 inches (W x D) for stability. Additional functions offered by this micrometer include origin setting, zero setting, data hold, function lock, and alarms for low voltage and counting value composition errors. This micrometer offers serial data output (using optional SPC cables, sold s... shopify_US_849798561839 new 638.39 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/518aIuA4ffL_grande.jpg?v=1528151894 Mitutoyo Dimensional Measurement yes 603908516255 0.0 kg VETUS INSTRUMENTS UM-2 Handheld Digital Portable Ultrasonic Thickness Gauge Tester Meter 0.03'' to 12'' w/ PT-08 Probe P-E (pulse-echo) E... https://jumboindustrial.com/products/vetus-instruments-um-2-handheld-digital-portable-ultrasonic-thickness-gauge-tester-meter-0-03-to-12-w-pt-08-probe-p-e-pulse-echo-el-backlight-storage-500-thickness-values Brand: VETUS INSTRUMENTSFeatures: ★ Measuring Range : 0.8~300mm(standard method)depending on probe ,material and surface condition★ Repeatability: ±0.05mm★ 0.1mm resolution, 128×64 dot-matrix LCD screen with EL backlight★ Automatic V -Path Correction★ Auto shut-off:  after 5 minutes of non-usePublisher: VETUS INSTRUMENTSDetails: Shipping Policy : Battery and Liquid not included during the shipping UM-2 In addition to the entire functions of UM-1, UM-2 has the additional functions: 0.01mm high Resolution. 7 built-in probe compensating lines Technical Specifications *Operating Principle: Ultrasonic pulse/echo method with dual-crystal probes *Measuring Range : 0.8~300mm(standard method)depending on probe ,material and surface condition *Resolution: mm -0.01, 0.1 inches -0.001, 0.01 *V -Path Correction:Automatic  *Probe zero adjustment: 1-Point Calibration(normal measurement); 2-Point Calibration(curve surface measurement or other special application with a high precision) *Repeatability: ±0.05mm *Display: 128×64 dot-matrix LCD screen with EL backlight *Measurement Update Rate: 4Hz in standard measurement mode *Material Velocity Range: 1000~9999m/s or 0.0394~0.3937in/us *Operating Language: English、Chinese *Power Supply : Two 1.5VAA alkaline batteries(Battery not included in the package)warning with low battery voltage *Operating Times: Up to 200 hours(without backlight) with alkaline batteires *Auto shut-off:  after 5 minutes of non-use *Working Temperature: -10℃~+50℃,Sp... shopify_US_849798365231 new 610.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51wSKdwFNNL_grande.jpg?v=1528151895 VETUS INSTRUMENTS Dimensional Measurement yes 647904232399 0.0 kg Mitutoyo 340-351-30 OMC-6"MX Interchangeable Anvil Micrometer, IP65, 0"-6", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-340-351-30-omc-6mx-interchangeable-anvil-micrometer-ip65-0-6-0-00005-0-001-mm Brand: MitutoyoFeatures: Wide measuring range with interchangeable anvilsSupplied with zero-setting standards bar for each rangeHas SPC data outputPublisher: MitutoyoRelease Date: 2017-05-15Details: Mitutoyo 340-351-30 OMC-6"MX, Micrometer, Interchangeable Anvil, 0-6",.00005"/0.001 mm, IP65.EAN: 4946368695907 shopify_US_849797972015 new 698.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51kitsUgHaL_grande.jpg?v=1528151896 Mitutoyo Dimensional Measurement yes 4946368695907 0.0 kg 193-923 0-3" Mechanical Digital Outside MicrometerMITUTOYO https://jumboindustrial.com/products/193-923-0-3-mechanical-digital-outside-micrometermitutoyo Brand: MitutoyoFeatures: With fitted caseAccuracy: ±.0001". Graduation: .0001"Thimble and sleeve incorporated to verify the digital counter readings.Carbide faces.Supplied with standard bar (excludes model #193-211).Publisher: MitutoyoDetails: Mitutoyo 193-923 3PCS/SETUPC: 094724660015EAN: 0094724660015 shopify_US_849797447727 new 637.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ioa8iObgL_grande.jpg?v=1528151896 Mitutoyo Dimensional Measurement yes 094724660015 0.0 kg Mitutoyo 500-734-10 Absolute Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, 0-8" Range, +/-0.001" Accuracy, 0.0005" Reso... https://jumboindustrial.com/products/mitutoyo-500-734-10-absolute-digital-caliper-stainless-steel-battery-powered-inch-metric-0-8-range-0-001-accuracy-0-0005-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper and ABSOLUTE linear encoder technology componentsFour-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and stepDigital, single-value readout LCD display in inch and metric units for readabilityFunction control buttons on caliper face for ease of access: Origin, On/Off, and Zero/ABS (Absolute Scale)IP67-certified for protection against dust and temporary submersion in waterPublisher: MitutoyoDetails: The Mitutoyo 500 series ABSOLUTE Coolant Proof Caliper is a dust and water resistant digital caliper made of durable hardened stainless steel using Mitutoyo’s ABSOLUTE linear encoder technology. This caliper conforms to IP67 protection levels enabling it to operate in workshop conditions exposed to water, dust, coolant, or oils. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper has an LCD that displays in inch and metric units which increases reading reliability, and reflects all ABSOLUTE system activities. This digital caliper has accessible function control buttons, such as Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. The Absolute Scale (ABS) function tracks the set origin point, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting. The LCD can b... shopify_US_849797316655 new 825.16 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31oEnkRqKpL_grande.jpg?v=1528151896 Mitutoyo Dimensional Measurement yes 4946368574929 0.0 kg INSIZE 2151-AL75 Electronic Internal Caliper Gage, 0.0005" Resolution, 2.2" - 3" https://jumboindustrial.com/products/insize-2151-al75-electronic-internal-caliper-gage-0-0005-resolution-2-2-3 Brand: INSIZEFeatures: Reading in digit and analog. Display can be rotated by 320ºButton function: tolerance go and no-go display, data preset, measuring direction change, max./min./range measurementInch/metric conversion, absolute/incremental measurement. Cr2032 battery, automatic power off. Data outputPublisher: INSIZEDetails: Electronic internal caliper gage, 2.2-3"/55-75mm, resolution 0005" 0/01mm.EAN: 6928640313998 shopify_US_849796923439 new 637.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31NvkHU2sTL_62e7442b-d6c2-479d-baac-4f658cf9491e_grande.jpg?v=1528151897 INSIZE Dimensional Measurement yes 6928640313998 0.0 kg ROBA30 https://jumboindustrial.com/products/roba30 Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126963187 shopify_US_849796628527 new 665.58 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21bNjissSpL_grande.jpg?v=1528151898 KANON (Nakamura MFG) Dimensional Measurement yes 4582126963187 0.0 kg Mitutoyo 324-252-30 GMB-50MX Gear Micrometer, 25 mm-50 mm https://jumboindustrial.com/products/mitutoyo-324-252-30-gmb-50mx-gear-micrometer-25-mm-50-mm Brand: MitutoyoFeatures: Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuring facesWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoDetails: Mitutoyo 324-252-30 GMB-50MX, Micrometer, Gear, 25-50 mm.EAN: 4946368695693 shopify_US_849795907631 new 752.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31A91gptWfL_grande.jpg?v=1528151898 Mitutoyo Dimensional Measurement yes 4946368695693 0.0 kg Mitutoyo 369-350 LCD Disk Micrometer, Non-Rotating Spindle, Ratchet Stop, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0002" Ac... https://jumboindustrial.com/products/mitutoyo-369-350-lcd-disk-micrometer-non-rotating-spindle-ratchet-stop-0-1-0-25-4mm-range-0-00005-0-001mm-graduation-0-0002-accuracy Brand: MitutoyoFeatures: Disc-shaped faces with flanges for measuring the pitch of gear teethDigital, single-value readout LCD displays in inch and metric units for readabilityNon-rotating spindle helps provide steady positioning during measurementRatchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementStatistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately)Publisher: MitutoyoDetails: The Mitutoyo 369 series LCD disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth. It also has a ratchet-stop mechanism for uniform adjustment, a non-rotating spindle that helps provide steady positioning during measurement, an LCD digital readout that converts between inches and metric with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The frame i... shopify_US_849795547183 new 570.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/319i8rUHMTL_grande.jpg?v=1528151899 Mitutoyo Dimensional Measurement yes 4946368507873 0.0 kg Starrett R811-5CZ Dial Test Indicator with Swivel Head with Attachments, Red Dial, 0-15-0 Reading, 1.375" Dial Dia., 0-0.03" Range, 0.000... https://jumboindustrial.com/products/starrett-r811-5cz-dial-test-indicator-with-swivel-head-with-attachments-red-dial-0-15-0-reading-1-375-dial-dia-0-0-03-range-0-0005-graduation-0-0005-accuracy Brand: StarrettColor: RedFeatures: Series 811 with 1-3/8" diameter adjustable face, steel contact point, and choice of red, white, or black faceBalanced dial with continuous clockwise pointer rotation with automatic reversal, and ball-bearing lever system with measuring insert swivels through to 210 degreesFace can swivel from fully vertical to fully horizontal and has two dovetail mounts for mounting horizontally or vertically from the top or backGear-driven, jeweled movement, and contacts are frictionally adjustable and replaceableMeets or exceeds accuracy and performance requirements of national and international standards, and are traceable to the United States National Institutes of Standards and Technology (NIST).Publisher: StarrettRelease Date: 2017-05-15Details: The Starrett dial test indicator with swivel head with attachments has a Red, black, or white face, and inch measurements. The face can be set at any point between vertical and horizontal (from 0 to 90 degrees). The choice of red, white, or black dial face can be used in a variety of lighting settings. The steel ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation with automatic reversal and helps prevent plus or minus confusion. The ball-bearing lever system with measuring insert swivels through to 210 degrees. The dial has face that can swivel from fu... shopify_US_849794105391 new 595.70 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41YJcX3MPtL_grande.jpg?v=1528151903 Starrett Dimensional Measurement yes 049659632651 0.0 kg Mitutoyo 389-352-30 PMU6-2"MX Micrometer, IP65, Sheet Metal, 1"-2", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-389-352-30-pmu6-2mx-micrometer-ip65-sheet-metal-1-2-0-00005-0-001-mm Brand: MitutoyoFeatures: Measures thickness of sheet metal, paper, plastic, and rubber partsWith Ratchet Stop for constant forceIP65 water/dust protectionPublisher: MitutoyoDetails: Mitutoyo 389-352-30 Pmu6-2"MX, Micrometer, Sheet Metal, F-F, 1-2",.00005"/0.001 mm, IP65.EAN: 4946368689210 shopify_US_849793384495 new 617.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51ASQVi8PzL_grande.jpg?v=1528151905 Mitutoyo Dimensional Measurement yes 4946368689210 0.0 kg Starrett 2700-801 Backlight Electronic Indicator with 1"/25 mm Range and .00005"/0.001 mm Resolution, SPC output and 3/8" Stem Diameter https://jumboindustrial.com/products/starrett-2700-801-backlight-electronic-indicator-with-1-25-mm-range-and-00005-0-001-mm-resolution-spc-output-and-3-8-stem-diameter Brand: StarrettFeatures: Set tolerances to back lights (red, Green, amber)Analog visual displayUSB/AB power cable includedABS/preset measuring holdT.I.R. With high storage RecallPublisher: StarrettDetails: Starrett 2700-801 backlight electronic indicator with 1"/25mm range and .00005"/0.001mm resolution, SPC output and 3/8 inch stem diameter. The 2700 backlight indicators are available in 1", 2", and 4 inch range with multiple resolution. The deep backlight colors indicate the tolerances to overcome reading at far distances, in poor lighting conditions, and with inexperienced operators. Software included.UPC: 049659727593EAN: 0049659727593 shopify_US_849793351727 new 599.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/5113X4Tl1kL_grande.jpg?v=1528151905 Starrett Dimensional Measurement yes 049659727593 0.0 kg South ET-05 5" Electric Theodolite https://jumboindustrial.com/products/south-et-05-5-electric-theodolite Brand: South EnterprisesFeatures: 5" Angular AccuracyReading system: Absolute EncodingAuto-vertical compensator: Liquid- electric detectionSpecific large 2-side LCD screen for clear reading in all conditionsDetection method: Horizontal angle: dual Vertical angle: dualPublisher: South Surveying andamp; Mapping InstrumentDetails: The South ET series Theodolites have Smart appearance, reasonable structure, practical functions. They are easy-to-use, and with excellent performance and reliable quality. (Includes: theodolite, tribrach, NiH rechargeable battery, Charger, user manual, and one year manufacturer warranty) SPECIFICATION Model: ET-05 Telescope: • Magnification: 30X • Objective Lens: 45mm • Overall Length: 157mm • Stadia Ration: 100 • Stadia Constant: 0 • Image: Erect • Field of View: 1° 30" • Minimum Focus: 1.4m • Resolving Power: 3.0' Electronic Angle Measurement: • Reading System Photoelectric detection by incremental encoder • Diameter of Circle (VHz): 79mm • Minimum Reading: 1"/5" (Selectable) • Accuracy: 5" • Horizontal Angle: Dual • Vertical Angle: Single Display: • (LCD) Display Type: 2 sides, segment LCD in two lines Level Sensitivity: • Plate Level: 30"/2mm (30" per 2mm) • Circular Level: 8'/2mm (8" per 2mm) Auto Vertical Compensator: • System: Liquid-electric detection/plate level selectable • Working range: +3' • Accuracy: 1" (Liquid-electric detection) 30""/2mm (plate level) Optical Plummet Telescope: • Image: Erect • Ma... shopify_US_849793024047 new 599.00 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ZSADVp-IL_7de58bcc-59bf-43fe-87f5-c80a0dcc82db_grande.jpg?v=1528151906 South Enterprises Dimensional Measurement yes 852688004012 0.0 kg Mitutoyo 514-103 Vernier Height Gauge, 0-12" Range, 0.001" Resolution, -0.002" Accuracy, 3.1kg Mass https://jumboindustrial.com/products/mitutoyo-514-103-vernier-height-gauge-0-12-range-0-001-resolution-0-002-accuracy-3-1kg-mass Brand: MitutoyoFeatures: Measurement range of 0" - 12"/0 - 300 mm, and graduated to 0.001"/0.02 mmVernier scale for precise measurementAdjustable zero reference point for manual change of the base positionHand-operated slider with fine-adjustment carriage for precise feedCarbide-tipped scriber for hardness and to help prolong lifePublisher: MitutoyoDetails: The Mitutoyo 514-103 vernier height gauge has a measurement range of 0” - 12"/0 - 300 mm, and is graduated in both inches and metric to 0.001”/0.02 mm, with + or - 0.002”/0.04 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 6.83 lbs/3.1 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distanc... shopify_US_849792794671 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/311WT7rR0BL_grande.jpg?v=1528151907 Mitutoyo Dimensional Measurement yes 4946368096230 0.0 kg Haimer 80.363.A40NG New Generation 3D-Sensor with Integrated Taper HSK A40 https://jumboindustrial.com/products/haimer-80-363-a40ng-new-generation-3d-sensor-with-integrated-taper-hsk-a40 Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095633 shopify_US_849792237615 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31p3iA66TtL_7c09f842-4198-4186-b79c-6e3b7d2286fc_grande.jpg?v=1528151908 Haimer Dimensional Measurement yes 4034221095633 0.0 kg Haimer 80.363.E40NG New Generation 3D-Sensor with Integrated Taper HSK E40 https://jumboindustrial.com/products/haimer-80-363-e40ng-new-generation-3d-sensor-with-integrated-taper-hsk-e40 Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerRelease Date: 2017-05-15Details: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095688 shopify_US_849791516719 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31p3iA66TtL_a8fb1bd4-495a-496d-9052-0b106f95fe5f_grande.jpg?v=1528151909 Haimer Dimensional Measurement yes 4034221095688 0.0 kg Haimer 80.364.30NG New Generation 3D-Sensor with Integrated Taper SK 30 https://jumboindustrial.com/products/haimer-80-364-30ng-new-generation-3d-sensor-with-integrated-taper-sk-30 Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095718 shopify_US_849791189039 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31p3iA66TtL_grande.jpg?v=1528151910 Haimer Dimensional Measurement yes 4034221095718 0.0 kg Haimer 80.365.40.FHN Universal FH 3D Sensor with Integrated Taper BT 40, Neutral Model https://jumboindustrial.com/products/haimer-80-365-40-fhn-universal-fh-3d-sensor-with-integrated-taper-bt-40-neutral-model Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221014993 shopify_US_849789157423 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41VOu5XZa8L_grande.jpg?v=1528151913 Haimer Dimensional Measurement yes 4034221014993 0.0 kg Haimer 80.367.40.FHN Universal FH-3D-Sensor with Integrated Taper CAT40 https://jumboindustrial.com/products/haimer-80-367-40-fhn-universal-fh-3d-sensor-with-integrated-taper-cat40 Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095749 shopify_US_849789026351 new 600.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BtFICoa0L_debb43b8-6496-470c-b2c2-081f39fcb66b_grande.jpg?v=1528151913 Haimer Dimensional Measurement yes 4034221095749 0.0 kg Mitutoyo 539-822 AT715-1500 Linear Scale, Slim Spar Type, 60"/1500 mm https://jumboindustrial.com/products/mitutoyo-539-822-at715-1500-linear-scale-slim-spar-type-60-1500-mm Brand: MitutoyoFeatures: Electromagnetic induction principle means scales are unaffected by contaminationAbsolute scales have eliminated the need for Origin restoration, also drastically reduces power consumptionSlim spar TypePublisher: MitutoyoDetails: At715-150 linear Scale0 linear scale.UPC: 603908364849EAN: 0603908364849 shopify_US_849788698671 new 600.59 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31DDyyEeLDL_grande.jpg?v=1528151914 Mitutoyo Dimensional Measurement yes 603908364849 0.0 kg Starrett 657-650Z Base and Post Assembly Complete Set, With 650B1 Indicator, 657S Snug, and 3 Contact Points https://jumboindustrial.com/products/starrett-657-650z-base-and-post-assembly-complete-set-with-650b1-indicator-657s-snug-and-3-contact-points Brand: StarrettFeatures: Base and post assembly with number 650B1 indicator, number 657S snug and 3 contact pointsPublisher: StarrettDetails: Starrett 657-650Z MAGNETIC BASE WITH 650B1 INDICATORUPC: 049659652598EAN: 0049659652598 shopify_US_849788600367 new 554.04 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41OxHJAF7bL_grande.jpg?v=1528151914 Starrett Dimensional Measurement yes 049659652598 0.0 kg INSIZE 6547-E1 Right Angle Plate, 3.9" x 3.9" x 4.5" https://jumboindustrial.com/products/insize-6547-e1-right-angle-plate-3-9-x-3-9-x-4-5 Brand: INSIZEFeatures: Hardened to hrc60±2. V groove for cylindersParallelism and squareness between a, b, c, d, e, f, g and h: 197 μinParallelism and squareness of v groove to a, b, c, d, e, f, g and h: 197 μinPublisher: INSIZEDetails: Right angle plate, 3.9x3.9x4.5".EAN: 6928640359521 shopify_US_849788403759 new 583.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/4196yyY_2BPSL_grande.jpg?v=1528151915 INSIZE Dimensional Measurement yes 6928640359521 0.0 kg EMA60J https://jumboindustrial.com/products/ema60j Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126961923 shopify_US_849787912239 new 1,070.61 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31fH1qczRYL_grande.jpg?v=1528151916 KANON (Nakamura MFG) Dimensional Measurement yes 4582126961923 0.0 kg Mitutoyo 340-252-30 OMC-300MX Interchangeable Anvil Micrometer, IP65, 150 mm-300 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-340-252-30-omc-300mx-interchangeable-anvil-micrometer-ip65-150-mm-300-mm-0-001-mm Brand: MitutoyoFeatures: Wide measuring range with interchangeable anvilsSupplied with zero-setting standards bar for each rangeHas SPC data outputPublisher: MitutoyoDetails: Mitutoyo 340-252-30 OMC-300MX, Micrometer, Interchangeable Anvil, 150-300 mm, 0.001 mm, IP65.EAN: 4946368695891 shopify_US_849787453487 new 820.62 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51zJTOAccOL_grande.jpg?v=1528151916 Mitutoyo Dimensional Measurement yes 4946368695891 0.0 kg 5 1/4-8 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-1-4-8-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 1/4-8 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 1/4-8 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769022118EAN: 0763769022118 shopify_US_849785913391 new 603.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_9c37392d-0f91-4bdd-ac51-60ef581ffb72_grande.jpg?v=1528151918 Linsen Dimensional Measurement yes 763769022118 0.0 kg Starrett T221XL Hi-Precision Micrometer, Plain Thimble, Lock Nut, Carbide Faces, 0-1" Range, 0.0001" Graduation https://jumboindustrial.com/products/starrett-t221xl-hi-precision-micrometer-plain-thimble-lock-nut-carbide-faces-0-1-range-0-0001-graduation Brand: StarrettFeatures: with Carbide Faces, Ratchet StopPublisher: StarrettDetails: Starrett Micrometer Part # 50754 T221XL No. 221 Hi-Precision Micrometer permits direct readings in ten-thousandths of an inch (.0001") without a vernier, plus automatic control of spindle pressure. This micrometer features a black graduated inner thimble and sleeve reading in thousandths and a red graduated outer thimble and sleeve with large, widely spaced graduations which give direct readings in ten-thousandths. It also features an exclusive constant pressure mechanism which eliminates "feel" and automatically insures consistent spindle pressure for every measurement. Extremely easy to use. Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.UPC: 049659507546EAN: 0049659507546 shopify_US_849785585711 new 499.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/310WKGtrqDL_grande.jpg?v=1528151919 Starrett Dimensional Measurement yes 049659507546 0.0 kg Starrett 8HC Cast Iron Square And Center Heads Large Combination Square, Black Wrinkle Finish, 4R Graduation, 24" Blade Size https://jumboindustrial.com/products/starrett-8hc-cast-iron-square-and-center-heads-large-combination-square-black-wrinkle-finish-4r-graduation-24-blade-size Brand: StarrettFeatures: Reversible lock boltsGraduation: No. 4 - 1/8", 1/16", 1/32", 1/64"Accurate spirit levelHardened steel bladeCast iron and black wrinkle finish headsPublisher: StarrettWarranty: ManufacturerDetails: Extra large, heavy-duty construction throughout. The square head is 8-3/8" long and the center head has 4-1/4" arms. Furnished with 24" blade, 1-1/2" wide x 1/10" thick, with distinctive, machine divided graduations.UPC: 049659500387EAN: 0049659500387 shopify_US_849784832047 new 645.71 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/213u-3aHb6L_grande.jpg?v=1528151919 Starrett Dimensional Measurement yes 049659500387 0.0 kg 0-12" Range Stainless Steel Inch Dial Caliper with 0.001" Graduations https://jumboindustrial.com/products/0-12-range-stainless-steel-inch-dial-caliper-with-0-001-graduations-1 Brand: Brown andamp; SharpePublisher: BROWN andamp; SHARPEDetails: Measures I.D., O.D., depth, and steps.Specifictions:Item: Dial CaliperCaliper Grouping: Dial CaliperDimension Type: InchCaliper Range: 0-12"Graduations: 0.001"Caliper Material: Stainless SteelAccuracy: +/-0.0008"Caliper Dial Color: WhiteRange per Revolution: 0.010"Jaw Depth: 2-1/2"Standards: NISTFeatures: Inside, Outside, Depth and Step MeasuringIncludes: Fitted CaseLong Form Calibration Certificate: No"EAN: 7438046872801 shopify_US_849784438831 new 306.90 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31mNweSjytL_grande.jpg?v=1528151920 Brown & Sharpe Dimensional Measurement yes 7438046872801 0.0 kg 95mm x 4 Metric Thread Ring Gage M95 x 4.0mm Pitch https://jumboindustrial.com/products/95mm-x-4-metric-thread-ring-gage-m95-x-4-0mm-pitch Brand: MerlintoolsFeatures: Metric M95 x 4.0mm Thread Ring Gage.Thread pitch: 4.0mmClass: 6gT pass and Z not passPublisher: MerlintoolsDetails: metric M95 x 4.0mm set thread ring gage.UPC: 737382811381EAN: 0737382811381 shopify_US_849784340527 new 605.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41-wisKREXL_08ba970b-3220-440c-96d6-9c73bb084ca6_grande.jpg?v=1528151920 Merlintools Dimensional Measurement yes 737382811381 0.0 kg Mitutoyo 314-351-30 VM3-.6"MX V-Anvil Micrometer with Relief, 3 Flute, 0.05"-0.6", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-314-351-30-vm3-6mx-v-anvil-micrometer-with-relief-3-flute-0-05-0-6-0-00005-0-001-mm Brand: MitutoyoFeatures: Measures the outside diameter of cutting tools with an odd number of flutesWith ratchet stop for constant forceWith SPC outputPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 314-351-30 VM3-.6"MX, Micrometer, V-Anvil, With Relief, 3-Flute,.05-.6",.00005"/0.001 mm.EAN: 4946368695631 shopify_US_849784012847 new 623.55 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51CmJiWUpkL_grande.jpg?v=1528151921 Mitutoyo Dimensional Measurement yes 4946368695631 0.0 kg 4 7/8-4 UN Thread Plug Gage 2B GO NOGO 100% Calibrated ship by by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-7-8-4-un-thread-plug-gage-2b-go-nogo-100-calibrated-ship-by-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 7/8-4 UN thread plug gageClass of fit: 2B including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Taperlock, double ends with handlewe will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 7/8-4 UN thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769024655EAN: 0763769024655 shopify_US_849783619631 new 606.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41MkjF1NOML_grande.jpg?v=1528151921 Linsen Dimensional Measurement yes 763769024655 0.0 kg INSIZE 3206-24 Outside Micrometer with Interchangeable Anvils, 20" -24", Graduation .001" https://jumboindustrial.com/products/insize-3206-24-outside-micrometer-with-interchangeable-anvils-20-24-graduation-001 Brand: INSIZEFeatures: Ratchet stop. Carbide measuring facesSupplied with setting standardsLock nut and ratchet in case and traceable to nistPublisher: INSIZEDetails: Outside micrometer with interchangeable anvils, 20-24", graduation 001".EAN: 6928640327346 shopify_US_849783193647 new 601.73 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41PK9VBuQ0L_4a919436-44df-49ef-b6ce-04c4249f7c91_grande.jpg?v=1528151922 INSIZE Dimensional Measurement yes 6928640327346 0.0 kg INSIZE 2103-50E Electronic Indicator, Resolution 0.00005", 2" https://jumboindustrial.com/products/insize-2103-50e-electronic-indicator-resolution-0-00005-2 Brand: INSIZEFeatures: Meet asme B89.1.10M-2001. Reading in digit and analog. Display can be rotated by 320ºButton function: tolerance go and no-go display, data preset, measuring direction changeMax./min./range measurement, inch/metric conversion, absolute/incremental measurementCr2032 battery, automatic power off. Data outputPublisher: INSIZEDetails: Electronic indicator, 2"/5.8mm, resolution 00005" 0/001mm.EAN: 6928640329432 shopify_US_849782538287 new 480.77 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41pe1pDdTmL_grande.jpg?v=1528151923 INSIZE Dimensional Measurement yes 6928640329432 0.0 kg Starrett 683M-4Z Millimeter Reading Internal Chamfer Gauge With Yellow Dial, 0-90 Degree Angle, 25-50mm Range https://jumboindustrial.com/products/starrett-683m-4z-millimeter-reading-internal-chamfer-gauge-with-yellow-dial-0-90-degree-angle-25-50mm-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designInternal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-03-12Details: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659649925EAN: 0049659649925 shopify_US_849782439983 new 590.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ogK0uOKEL_grande.jpg?v=1528151924 Starrett Dimensional Measurement yes 049659649925 0.0 kg 3 3/4-16 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/3-3-4-16-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 3 3/4-16 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 3 3/4-16 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021548EAN: 0763769021548 shopify_US_849782177839 new 610.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41j6c_2Ba3g9L_grande.jpg?v=1528151925 Linsen Dimensional Measurement yes 763769021548 0.0 kg INSIZE 6888-2 Roller Bearing V-Block Set, 5.9" x 3.1" x 3.9", Pair https://jumboindustrial.com/products/insize-6888-2-roller-bearing-v-block-set-5-9-x-3-1-x-3-9-pair Brand: INSIZEFeatures: Two v-blocks per setWork pieces don't get damaged due to bearingsSuitable for heavy work piecesPublisher: INSIZEDetails: Roller bearing v-block set, 5.9x3.1x3.9", pair.EAN: 6928640320774 shopify_US_849781653551 new 627.63 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31q8emDUBmL_142b74f6-f9f6-4863-811b-739372e69dfb_grande.jpg?v=1528151926 INSIZE Dimensional Measurement yes 6928640320774 0.0 kg Brown and Sharpe TESA LCD DIGICO 610M Electronic Indicator, Inch and Metric, 0-1" Range, 0.00005" Resolution, +/-0.005mm Accuracy https://jumboindustrial.com/products/brown-sharpe-tesa-lcd-digico-610m-electronic-indicator-inch-and-metric-0-1-range-0-00005-resolution-0-005mm-accuracy Brand: TESA Brown andamp; SharpeFeatures: Display: 6 digit LCD with signResponse speed: 20 in/sec5.3 oz Measuring forceDisplay mode: maximum value, minimum value or range (maximum to minimum), absolute, presetInch/metric conversionPublisher: Hexagon MetrologyUPC: 622419469867EAN: 0622419469867 shopify_US_849781391407 new 643.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/310louEaBZL_grande.jpg?v=1528151927 TESA Brown & Sharpe Dimensional Measurement yes 622419469867 0.0 kg Haimer 80.365.30NG 3D-Sensor New Generation with Integrated Taper BT30 https://jumboindustrial.com/products/haimer-80-365-30ng-3d-sensor-new-generation-with-integrated-taper-bt30 Brand: HaimerFeatures: 3-dimensional edge finder locates in X,Y and Z axisMeasure work piece dimensions1 Short Probe Tip Included w/ SensorMeasure surface flatnessNo subtracting indicator tip diameter = NO MATH!Publisher: HaimerDetails: Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!EAN: 4034221095732 shopify_US_849781096495 new 610.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BtFICoa0L_grande.jpg?v=1528151927 Haimer Dimensional Measurement yes 4034221095732 0.0 kg Milwaukee 10" / 24" / 48" / 78" REDSTICK Magnetic Box and Torpedo Level Set MLBXCM78 and Toucan City Tape measure https://jumboindustrial.com/products/milwaukee-10-24-48-78-redstick-magnetic-box-and-torpedo-level-set-mlbxcm78-and-toucan-city-tape-measure Brand: Toucan CityFeatures: EXCLUSIVELY SOLD BY TOUCAN CITY; Items in this bundle may ship in more than one box and arrive separately.Includes: one 24 Milwaukee box magnetic one 48 Milwaukee box magnetic one 78 Milwaukee box magnetic one Milwaukee block torpedo one 48 in. storage bag and Toucan City Tape measureTough, water resistant nylon construction2 integrated carrying or hanging handles2 debris vent to prevent dust, dirt and/or water build upPublisher: Toucan City + MilwaukeeDetails:   EXCLUSIVELY SOLD BY TOUCAN CITY; Items in this bundle may ship in more than one box and arrive separately.   The 78 in. Storage Bag includes a 78 Milwaukee Box level, 48 Milwaukee Box level, 24 Milwaukee Box level a Milwaukee Block Torpedo. Made from tough, water resistant nylon with all metal hardware and durable zipper closures to ensure ultimate durability on the jobsite. Includes 2-integrated carrying handles that can also act as hang handles for easy transport and storing. Includes external storage and integrated tool loops for additional storage of tools and/or building materials.   andgt;   Includes: one 24 Milwaukee box magnetic one 48 Milwaukee box magnetic one 78 Milwaukee box magnetic one Milwaukee block torpedo one 48 in. storage bag andgt;   Tough, water resistant nylon construction andgt;   All metal hardware to ensure ultimate durability andgt;   Durable zipper closure andgt;   2 integrated carrying or hanging handles andgt;   Integrated external tool loops for addit... shopify_US_849780965423 new 825.28 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/419VJKISi6L_grande.jpg?v=1528151927 Toucan City Dimensional Measurement yes 7426870925596 0.0 kg Depth Vernier Caliper, inox 500/250 mm, 0,5 mm, chromed, with 90° hook, in a pouch https://jumboindustrial.com/products/depth-vernier-caliper-inox-500-250-mm-0-5-mm-chromed-with-90-hook-in-a-pouch Brand: Vogel GermanyPublisher: VOGEL-GERMANYDetails: Depth Vernier Caliper, inox 500/250 mm, 0,5 mm, chromed, with 90° hook, in a pouchEAN: 4010873356391 shopify_US_849780670511 new 672.87 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/2145yKaDfYL_grande.jpg?v=1528151928 Vogel Germany Dimensional Measurement yes 4010873356391 0.0 kg Starrett 811-MCZ Dial Test Indicator with Attachments, Swivel Head, Yellow Dial, 0-40-0 Reading, 0-0.8mm Range, 0.01mm Graduation, +/-0.0... https://jumboindustrial.com/products/starrett-811-mcz-dial-test-indicator-with-attachments-swivel-head-yellow-dial-0-40-0-reading-0-0-8mm-range-0-01mm-graduation-0-01mm-accuracy Brand: StarrettColor: YellowFeatures: Available in yellow dial color, large dialTwo positioning mounts work with dovetail test indicatorSteel contact point 16mm" length and 2mm ball diameter, in case with attachmentContacts are frictionally adjustable and replaceableContact point reverses, always maintaining clockwise hand rotationPublisher: StarrettRelease Date: 2017-05-15Details: These are some of the most versatile and unique indicators available, the swivel head feature allows positioning to suit your line of sight from horizontal to vertical and at any angle in between 90 degree. Smooth, jeweled movement. Attachments includes dovetail body clamp, tool post holder, swivel post snug with dovetail indicator clamp, and snug and rod.UPC: 049659570830EAN: 0049659570830 shopify_US_849780375599 new 581.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51aaItEq1EL_grande.jpg?v=1528151929 Starrett Dimensional Measurement yes 049659570830 0.0 kg D-500 https://jumboindustrial.com/products/d-500 Brand: TruscoFeatures: Applications: outside-inside-step measurementMaterial: Stainless steelFeatures 1: easy to see in the digital displayFeature 2: With preset functionFeature 3: vernier can fine movement Feed.Publisher: ChinaDetails: Long type of calipers. High cost performance model!EAN: 4975846037373 shopify_US_849780211759 new 659.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31A8_2ByYhaqL_grande.jpg?v=1528151929 Trusco Dimensional Measurement yes 4975846037373 0.0 kg Mitutoyo ABSOLUTE 550-301-10 Digital Caliper, Stainless Steel, Battery Powered, Nib Style Jaw, 0-200mm Range, +/-0.03mm Accuracy, 0.01mm ... https://jumboindustrial.com/products/mitutoyo-absolute-550-301-10-digital-caliper-stainless-steel-battery-powered-nib-style-jaw-0-200mm-range-0-03mm-accuracy-0-01mm-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper componentsFour-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and stepDigital, single-value readout LCD display in metric units for readabilityPosition memory for retaining measurementsFunction control buttons on the face, for ease of use: Origin, On/Off, and Zero/ABS (Absolute Scale)Publisher: MitutoyoDetails: The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations. This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, On/Off to automatically shut off the caliper after 30 minutes, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overs... shopify_US_849780113455 new 613.75 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31v1HhIZ02L_grande.jpg?v=1528151929 Mitutoyo Dimensional Measurement yes 4946368585307 0.0 kg Beta 1699Q/200 Precision Square Level https://jumboindustrial.com/products/beta-1699q-200-precision-square-level Brand: Beta ToolsFeatures: Made from die-cast ironWith 2 prismatic bases and 2 ground flat bases with 2 unbreakable vialsAccuracy: 0.05 mm/m.In wooden casePublisher: BETA UTENSILI S.P.A.Details: Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.EAN: 8014230086521 shopify_US_849780047919 new 714.54 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51m2jjvu0TL_grande.jpg?v=1528151930 Beta Tools Dimensional Measurement yes 8014230086521 0.0 kg Mitutoyo 326-351-30 TMC-1"MX Micrometer https://jumboindustrial.com/products/mitutoyo-326-351-30-tmc-1mx-micrometer Brand: MitutoyoFeatures: Interchangeable Anvil-SpindleWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 326-351-30 Tmc-1"MX, Tmc-1"MX.EAN: 4946368695808 shopify_US_849779916847 new 627.53 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51owoifI6UL_grande.jpg?v=1528151930 Mitutoyo Dimensional Measurement yes 4946368695808 0.0 kg Paint Gauge/Meter QNix 4200 Coating Thickness Gauge Fe 120 mil by Automation Dr.Nix by Automation Dr. Nix https://jumboindustrial.com/products/paint-gauge-meter-qnix-4200-coating-thickness-gauge-fe-120-mil-by-automation-dr-nix-by-automation-dr-nix Brand: Automation Dr. NixPublisher: Automation Dr. NixDetails: Paint Thickness Meter / Gauge -QNix 4200 was developed particularly for measuring tasks in the automobile industries. This compact paint gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the Paint Thickness Meter / Gauge -QNix 4200 precise measurements on steel, iron become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 120 mils. The sensitive measuring probe of the extremely small, light and handy Paint Thickness Meter / Gauge QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. The sensitive measuring probe of the extremely small, light and handy QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor and Eddy Current technology. Integrated measuring probe without cables or plugs. Broad spectrum of use: Dual probe for m... shopify_US_849779851311 new 615.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Y9gLRyOGL_9397a764-6650-46c2-bcd2-d0c91ef23cc1_grande.jpg?v=1528151930 Automation Dr. Nix Dimensional Measurement yes 7434000942931 0.0 kg Paint Meter- QNix 1200 Coating Thickness Gauge Fe 80 mil by Automation Dr. Nix https://jumboindustrial.com/products/paint-meter-qnix-1200-coating-thickness-gauge-fe-80-mil-by-automation-dr-nix Brand: Automation Dr. NixPublisher: Automation Dr. NixDetails: With Corrosion expert knowledge you always use QuaNix/QNix1200 Coating Thickness Gauge, Paint Meter/ Gauge, by Automation Dr. Nix. . As a classical among the coating thickness gauges/ meters, its absence cannot be imagined in the corrosion and metal finishing industries. As patented electronic Paint Thickness Gauge/ Meter with integrated probe for steel and iron, the QuaNix/QNix 1200 with a clear readable duplex LCD offers an unusually extensive spectrum of use and a large measuring range, up to 120 mils. The flat design of this gauge allows for measurements at difficult-to-access points. The simple and flexible use, even at wide stretching surfaces is appreciated by automobile appraisals around the globe. Automobile manufacturers and auto body shops trust in this gauge.The principle of simple, easy handling and precise measurement has made the combination paint gauge QNix 1200 to a reliable partner of the automotive market segment. Not only reliable in the automotive market but also in corrosion protection. It is a reliable coating thickness gauge that sets standards. Measures non-magnetic coatings on steel and iron. Easy. Precise. Problem-free and reliable: No calibration, no probe change. The wide measuring range makes the QuaNix/QNix 1200 a small universal genius. (Paint Meter- QNix 1200 Coating Thickness Gauge Fe 80 mil by Automation Dr. Nix)EAN: 7434000942900 shopify_US_849779720239 new 615.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31vxdSPNm7L_grande.jpg?v=1528151931 Automation Dr. Nix Dimensional Measurement yes 7434000942900 0.0 kg Mitutoyo 526-123 .4-.7" Bore Gage Set W/8probes 2.4" Probe https://jumboindustrial.com/products/mitutoyo-526-123-4-7-bore-gage-set-w-8probes-2-4-probe Brand: MitutoyoPublisher: MITUTOYODetails: Mitutoyo 526-123 .4-.7" Bore Gage Set W/8probes 2.4" ProbeUPC: 603908041573EAN: 0603908041573 shopify_US_849778343983 new 479.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/11v2ee9mm5L_grande.jpg?v=1528151932 Mitutoyo Dimensional Measurement yes 603908041573 0.0 kg 4 1/2-6 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-1-2-6-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 1/2-6 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 1/2-6 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021807EAN: 0763769021807 shopify_US_849778278447 new 620.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_93b8d7a2-411c-4639-8195-cbdf32a11abe_grande.jpg?v=1528151933 Linsen Dimensional Measurement yes 763769021807 0.0 kg Mitutoyo 209-352 Caliper Gauge, Pointed Jaw, White Face, 0.4-1.2" Range, +/-0.0015" Accuracy, 0.0005" Resolution, Meets IP65 Specifications https://jumboindustrial.com/products/mitutoyo-209-352-caliper-gauge-pointed-jaw-white-face-0-4-1-2-range-0-0015-accuracy-0-0005-resolution-meets-ip65-specifications Brand: MitutoyoColor: WhiteFeatures: Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thicknessSpring-loaded for point contact at constant measuring pressureDial display provides precise, readable measurements in standard inch unitsLarge measuring depth for hard-to-reach internal dimensionsRated IP65 for resistance to penetration by dust, and to liquid up to the force of a low-pressure water jetPublisher: MitutoyoDetails: The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in standard inch units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance betw... shopify_US_849778147375 new 639.01 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/412c2g0AjsL_b3ec0985-71de-4bc5-934f-b3aa8bad9f57_grande.jpg?v=1528151933 Mitutoyo Dimensional Measurement yes 603908536819 0.0 kg Starrett 823MEZ Tubular Inside Micrometer https://jumboindustrial.com/products/starrett-823mez-tubular-inside-micrometer Brand: StarrettFeatures: Rods are rigid and lightweight5-1/2-Inch (140mm) long handle furnishedEach rod is marked with lengthHardened and ground anvilsInterchangeable anvilsPublisher: StarrettDetails: The Starrett 823 Tubular Inside Micrometer Set features 0.01mm graduation, with 10 rods, 100-1000mm range, and 25mm movement of screw.UPC: 049659530575EAN: 0049659530575 shopify_US_849778016303 new 663.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51TUhb5EadL_grande.jpg?v=1528151934 Starrett Dimensional Measurement yes 049659530575 0.0 kg Mitutoyo 137-215 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-60" Range, 0.001" Graduation, -10.00132" Accuracy, 10 pcs Exten... https://jumboindustrial.com/products/mitutoyo-137-215-tubular-vernier-inside-micrometer-extension-rod-type-2-60-range-0-001-graduation-10-00132-accuracy-10-pcs-extension-rods Brand: MitutoyoFeatures: Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfacesVernier scale in inch units for taking precise inside dimension (ID) measurementsIncludes interchangeable extension rods for a diversified range of measurementSlow head travel helps provide fine positioningSolid extension rods help provide durabilityPublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” per revolution that helps provide fine positioning. The solid extension rods help provide durability. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to mea... shopify_US_849777721391 new 699.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Jy8YALEFL_grande.jpg?v=1528151934 Mitutoyo Dimensional Measurement yes 4946368438429 0.0 kg Groen 117737 Water Level Sensor 230Vac 50/60Hz 3.5Va For Groen Kettle Ah-20 40 60 80 441689 https://jumboindustrial.com/products/groen-117737-water-level-sensor-230vac-50-60hz-3-5va-for-groen-kettle-ah-20-40-60-80-441689 Brand: GroenFeatures: GROENKETTLE WATER LEVEL SENSOR117737Publisher: GROENDetails: WATER LEVEL SENSOR 230VAC, 50/60HZ, 3.5VA MAX, 8VAC SEC GROEN KETTLE AH-20, AH-40, AH-60, AH-80, DEE/20, DEE/40, DEE/60UPC: 844168918445EAN: 0844168918445 shopify_US_849776214063 new 735.77 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41tAedUBVLL_grande.jpg?v=1528151936 Groen Dimensional Measurement yes 844168918445 0.0 kg L S Starrett Company 196A1Z - Universal Back Plunger Dial Indicator, White, Graduation: 0.001", Reading: 0 to 100, Includes 3 Contact Poi... https://jumboindustrial.com/products/l-s-starrett-company-196a1z-universal-back-plunger-dial-indicator-white-graduation-0-001-reading-0-to-100-includes-3-contact-points-measurement-range-0-to-0-2 Brand: L.S. StarrettFeatures: Maximum measurement: 0.2 in, interchangeable points: Interchangeable Points Not Included, minimum measurement: 0 in, number of contact points: 3, dial graduation: 0.001 in, dial color: White, imperial or metric: Imperial, manufacturer catalog number: 50697, dial reading: 0 to 100, calibrated: Not Calibrated, contact points included: Contact Points IncludedPublisher: L S Starrett CompanyDetails: Specs:maximum measurement: 0.2 ininterchangeable points: Interchangeable Points Not Includedminimum measurement: 0 innumber of contact points: 3dial graduation: 0.001 indial color: Whiteimperial or metric: Imperialmanufacturer catalog number: 50697dial reading: 0 to 100calibrated: Not Calibratedcontact points included: Contact Points IncludedEAN: 7439026786729 shopify_US_849775788079 new 247.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/412zYLBB54L_grande.jpg?v=1528151937 L.S. Starrett Dimensional Measurement yes 7439026786729 0.0 kg Starrett 1019-1 Caliper Gauge, Pointed Jaw, White Face, 0.4-1.4" Range, 0.001" Resolution https://jumboindustrial.com/products/starrett-1019-1-caliper-gauge-pointed-jaw-white-face-0-4-1-4-range-0-001-resolution Brand: StarrettColor: WhiteFeatures: For convenient and accurate inner diameter measurementsDial graduations of 0.001" with range equaling 0.400" to 1.400"Spring-loaded for constant pressure and positive contact, to ensure reliable measurements0.040" (1.016 mm) diameter carbide ball measuring contacts for long life and wear resistanceRotatable bezel for zero setting and bezel lockPublisher: StarrettDetails: The Starrett 1019M-25 internal dial caliper gauge opens from 0.400” to 1.400” with a 3-1/4” arm length, and has carbide ball contacts for longer life and wear resistance. The arms reach into the workpiece, such as in bores of castings and inside readings in fabrications, to easily measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand is accurate. Dial indicators, also called dial gauges or probe indicators, are precision measuring tools used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standar... shopify_US_849775722543 new 696.84 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Oz6lM_2BTgL_grande.jpg?v=1528151937 Starrett Dimensional Measurement yes 049659665598 0.0 kg Starrett 439-24 Builders Combination Tool https://jumboindustrial.com/products/starrett-439-24-builders-combination-tool Brand: StarrettFeatures: This versatile tool is invaluable for carpenters, builders, patternmakers, cabinetmakers and all mechanicsCombines seven tool functions in one compact, practical unit, it is a rule, square, level, plumb, protractor, bevel and pitch-to-foot indicatorIt consists of a stock, 9" (230mm) long, a hardened, machine-divided 1-1/2" (38 mm) wide blade in 18" or 24" lengths, and a protractorOn one side the protractor is graduated from zero to 90 degree in both directions showing the direct and supplementary angles, the other side is graduated in 1/2" pitch increments from 0-12" per foot pitchThe stock has four levels which permits leveling or plumbing the work in relation to any angle or pitchThe stock is 9-Inch long and the 1-1/2-Inch wide blade is hardened and machine dividedOn one side the protractor is graduated from zero to 90-Degrees in both directions. This gives the direct and supplementary angles. The other side is graduated in 1/2-Inch pitch increments from 0-Inch to 12-Inch per foot pitchIdeal for laying out or cutting valleys or hips of different pitchIt is a rule, square, level, plumb, protractor, bevel and pitch to foot indicatorPublisher: StarrettDetails: Tool is ideal for laying out or cutting valleys or hips of different pitches, done as follows: Rotate the blade to the desired pitch, place the face of the stock against the work and draw a line. Then place the square end of the stock against the line and draw the complementary line. This... shopify_US_849775657007 new 473.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31URqoHbL2L_grande.jpg?v=1528151937 Starrett Dimensional Measurement yes 049659521115 0.0 kg Starrett 20-12 Hardened Steel Master Precision Square, 7" Beam Length, 12" Blade Length https://jumboindustrial.com/products/starrett-20-12-hardened-steel-master-precision-square-7-beam-length-12-blade-length Brand: StarrettFeatures: Made of high quality tool steelSquareness accuracy to 0.0001" (0.0025mm) every 6" (150mm)The beam is grooved at the inner corner for clearance of burr or dirtLength of blade from the inner edge of the beam to the end of the bladePublisher: StarrettDetails: This hardened steel square is used when extreme accuracy is required. The beams and blades are hardened, ground, and lapped to insure parallelism and straightness. Made of high quality tool steel, with the finest of craftsmanship throughout.UPC: 049659501360EAN: 0049659501360 shopify_US_849775362095 new 707.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31oqoKmO_2BiL_grande.jpg?v=1528151939 Starrett Dimensional Measurement yes 049659501360 0.0 kg Brown and Sharpe 599-181-901-1 Chrome Frame Outside Micrometer Set, 0-3" Range, 0.0001" Graduation https://jumboindustrial.com/products/brown-sharpe-599-181-901-1-chrome-frame-outside-micrometer-set-0-3-range-0-0001-graduation Brand: TESA Brown andamp; SharpeFeatures: Set includes three vernier scale micrometers with flat anvil/spindle pairs for taking outside diameter (OD) measurements from 0" to 3"0.0001" graduations on the thimble and sleeve for precise readingsTungsten carbide-tipped measuring faces resist wear, and friction-drive thimbles provides uniform pressure for precise measurementsSpindle lock holds measurements in placeComes with a 1" round reference disk, a 3" long setting rod, and a fitted wooden storage casePublisher: Hexagon MetrologyDetails: The Brown andamp; Sharpe 599-181-901-1 Chrome Frame Outside Micrometer Set includes three vernier scale micrometers with flat anvil/spindle pairs for taking outside diameter (OD) measurements from 0" to 3". The set comes with micrometers in the following sizes: 0" to 1", 1" to 2", and 2" to 3". The vernier scale on each thimble and sleeve is graduated to 0.0001" with an accuracy of 0.004mm for precise readings. The micrometers have tungsten carbide-tipped measuring faces that resist wear and convertible friction-drive thimble mechanisms for uniform or variable pressure during adjustment. The frame, thimble, and sleeve of each micrometer have a satin chrome rust- and glare-resistant finish. The 1" to 2" and 2" to 3" micrometers have heat-insulated frames to help reduce temperature-related expansion or contraction. A spindle lock helps provide secure locking of the measurement position. The micrometers meet DIN (Deutsches Institut für No... shopify_US_849775198255 new 319.32 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41MQuQ9y5YL_grande.jpg?v=1528151939 TESA Brown & Sharpe Dimensional Measurement yes 622419437842 0.0 kg SINOCMP 4-Axis Digital Readout System for Mill Lathe Machine https://jumboindustrial.com/products/sinocmp-4-axis-digital-readout-system-for-mill-lathe-machine Brand: SINOCMPFeatures: Voltage range: AC80V?260V 50Hz/60HzPower dissipation: 15WWorking temperature: -10??60?Storage temperature: -30??70?Relative humidity: ?90%?20±5??Publisher: SINOCMPDetails: SINOCMP 4-Axis Digital Readout System for Mill Lathe MachineTechnical Parameter: Digital readout1. Voltage range: AC80V?260V 50Hz/60Hz2. Power dissipation: 15W 3. Working temperature: -10??60?4. Storage temperature: -30??70?5. Relative humidity: ?90%?20±5??6. Coordinate Display: 1axis, 2axis, 3axis, 4axis(D70 series) 7. Display: 8 bit 8. Readout box input signal: TTL 9. Input frequency: ?5MHz10. Resolution: 0.1?m, 0.2 ?m, 0.5 ?m, 1 ?m, 2 ?m, 2.5 ?m, 5 ?m, 10 ?m 11. Minimum resolution of angles: 0.0001/pulse12. Weight: 2.2Kg(D70/D60 without brackets)?0.7Kg(DC50 series)Linear scale DC101. Voltage: DC5V 2.Output Signal: TTL/EIA-422-A3. Accuracy: ±3?m/±5?m/±10?m4. Biggest Working Speed: 20m/min(1?m) 60m/min(5?m) 5. Working Temperature: -10??60?6. Storage Temperature: -30??70? 7. Relative Humidity: ?90%?20±5?? 8. Grating System: The tansmissive and infrared optical measuring system. the infrared 9. Wave length is 800nm. 10. Reading head sliding system: Vertical or 45°five precision bearing system 11. Measuring Length: 50mm-1100mm 12. For technical support, please send email to sales(at)sinocmp.comShipping Detail: 1.We always use DHL or Fedex for fast and safe delivery. For your request on length of linear scale, we will need a little more time to make. All goods are packed in hig... shopify_US_849774936111 new 629.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51Q06VpCcSL_d3eb9673-2112-4a59-95d7-1ece3226e9bd_grande.jpg?v=1528151940 SINOCMP Dimensional Measurement yes 610822204335 0.0 kg Mitutoyo 570-302 LCD Absolute Digimatic Height Gauge, SPC Output, 0-300mm Range, 0.01mm Resolution, +/-0.03mm Accuracy, 4.6kg Mass https://jumboindustrial.com/products/mitutoyo-570-302-lcd-absolute-digimatic-height-gauge-spc-output-0-300mm-range-0-01mm-resolution-0-03mm-accuracy-4-6kg-mass Brand: MitutoyoFeatures: Measurement range of 0 - 300 mm, and precise to 0.01 mmLCD digital readout displays sharp figures for viewing easeHand-operated feed wheel for measurement easeElectrostatic capacitance linear encoder helps ensure repeatable, precise measurementStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerPublisher: MitutoyoDetails: The Mitutoyo 570-302 LCD Absolute Digimatic height gauge displays a metric measurement range of 0 - 300 mm, an LCD digital readout precise to 0.01 mm, with + or - 0.03 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as to set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. An electrostatic capacitance linear encoder helps prevent overspeed errors to help ensure repeatable, precise measurement. A hand-operated feed wheel raises and lowers the gauge on the beam for measurement ease, and a clamp lever allows the user to hold measurement position. The scriber, used to mark a position on a workpi... shopify_US_849774837807 new 646.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Ae-f1iBeL_5bb60ea1-e533-49ac-a0ba-a1e71c1e96cb_grande.jpg?v=1528151941 Mitutoyo Dimensional Measurement yes 6923903400118 0.0 kg Starrett 701B Internal Groove Vernier Inside Micrometer, 1.5-2.5" Range, 0.001" Graduation, +/-0.0002" Accuracy https://jumboindustrial.com/products/starrett-701b-internal-groove-vernier-inside-micrometer-1-5-2-5-range-0-001-graduation-0-0002-accuracy Brand: StarrettFeatures: Caliper-type jaws with flush-ended contacts for measurement of grooves inside rings, bores, and tubesVernier scale in inch units for taking precise inside dimension (ID) measurementsKnurled friction thimble helps provide quick adjustment capabilityLocking clamp to hold measurements in placeSatin chrome finish helps resist rust and reduce glarePublisher: StarrettDetails: The Starrett 701 series internal groove vernier inside micrometer has caliper-type jaws with flush-ended contacts for measurement of grooves inside rings, bores, and tubes, and a vernier scale in inch units for taking precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel, with hardened and ground flush-ended gauging contacts that help gauge grooves at the bottom of blind holes. A knurled friction thimble helps provide quick adjustment capability. The vernier scale is graduated to 0.001” and a locking clamp helps hold measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and ... shopify_US_849774608431 new 629.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41f0ab_2BunQL_grande.jpg?v=1528151941 Starrett Dimensional Measurement yes 049659529159 0.0 kg 4 3/4-6 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-3-4-6-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 3/4-6 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 3/4-6 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021906EAN: 0763769021906 shopify_US_849774182447 new 630.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_b12d9d59-5362-43a3-b30c-f888b241fc21_grande.jpg?v=1528151942 Linsen Dimensional Measurement yes 763769021906 0.0 kg 5 1/4-16 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-1-4-16-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 1/4-16 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 1/4-16 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for referenceUPC: 763769022132EAN: 0763769022132 shopify_US_849773789231 new 630.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_5b7351d0-f194-4823-b165-a3753e535a34_grande.jpg?v=1528151942 Linsen Dimensional Measurement yes 763769022132 0.0 kg INSIZE 1211-40 Vernier Caliper, 0.001" Graduation, 0" - 40" https://jumboindustrial.com/products/insize-1211-40-vernier-caliper-0-001-graduation-0-41 Brand: INSIZEFeatures: With fine adjustmentMade of stainless steelSatin chrome plated reading surfacePublisher: INSIZEDetails: Vernier caliper, 0-40"/0-1000mm, graduation 001" 0/02mmEAN: 6928640326530 shopify_US_849773330479 new 743.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21zKoDEs46L_grande.jpg?v=1528151943 INSIZE Dimensional Measurement yes 6928640326530 0.0 kg VETUS INSTRUMENTS UM-1D Handheld Portable Digital Through Coating Ultrasonic Thickness Gauge Tester Meter PT-08 Transducer P-E and E-E Mo... https://jumboindustrial.com/products/vetus-instruments-um-1d-handheld-portable-digital-through-coating-ultrasonic-thickness-gauge-tester-meter-pt-08-transducer-p-e-and-e-e-mode-echo-echo-through-paint-and-coatings-with-range-3mm-to-18mm Brand: VETUS INSTRUMENTSFeatures: ★Measuring Range : Standard measuring range: 0.8mm~300mm-Operating Principle: Standard mode: P-E (pulse-echo) method with dual-crystal probes★Measuring range: 3mm~18mm (using standard probe)-Coating mode: E-E(echo-echo) method with dual-crystal probes★Resolution: 0.1 mm or 0.001 in-0.1mm resolution, 128×64 dot-matrix LCD screen with EL backlight★Material Velocity Range: 1000~9999m/s or 0.0394~0.3937in/us-Automatic V -Path Correction★Operating Times: Up to 200 hours(without backlight)-Auto shut-off:  after 5 minutes of non-usePublisher: VETUS INSTRUMENTSDetails: Shipping Policy : Battery and Liquid not included during the shipping In addition to be compatible with all the functions of UM-1, UM-1D is equipped with an additional function of penetrating the coating, namely when there is paint on the surface of the object, the net thickness of the material can be directly measured without necessarily removal of the paint. Technical Specifications *Operating Principle: Standard mode: P-E (pulse-echo) method with dual-crystal probes; Coating mode: E-E(echo-echo) method with dual-crystal probes *Measuring Range : Standard measuring range: 0.8mm~300mm (depending on the distribution of the probe and the measured materials); The coating mode measuring range: 3mm~18mm (using standard probe) *Resolution: 0.1 mm or 0.001 in *V -Path Correction:Automatic  *Repeatability: ±0.1mm *Display: 128×64 dot-matrix LCD screen with EL backlight *Measurement Up... shopify_US_849773264943 new 628.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51PNHZTftTL_grande.jpg?v=1528151943 VETUS INSTRUMENTS Dimensional Measurement yes 647904232382 0.0 kg Graigar UM-1D Digital Through Coating Ultrasonic Thickness Gauge Tester Meter 0.03'' to 12'' with PT-08 Probe Transducer P-E and E-E Echo... https://jumboindustrial.com/products/graigar-um-1d-digital-through-coating-ultrasonic-thickness-gauge-tester-meter-0-03-to-12-with-pt-08-probe-transducer-p-e-and-e-e-echo-echo Brand: GraigarFeatures: Measuring range in Pulse-Echo:0.03'' to 12'', in Echo-Echo:0.12'' to 0.79''Same features as the UM-1, Plus Echo-Echo Mode (Through Paint andamp; Coatings)128 x 64 pixel graphical LCD with EL backlightV- path correction, Alarm Mode and Minimum CaptureUp to 200 hours with two 1.5V AA alkaline batteries (without backlight), AUTO-OFF after 5 minutes of inactivityPublisher: GraigarDetails: Operating principle: Standard mode:P-E (pulse-echo) method with dual-element probes Coating mode:E-E (echo-echo) method with dual-element probes Probe zero adjustment: Selectable: 1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision V-path correction:Automatic Measuring range: 0.8mm to 300mm; 0.031in to 11.81in in standard mode 3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode Depending on probe, material and surface condition Digital resolution:0.001in or 0.1mm Units: inch or mm Display:128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm Measurement update rate: 4 Hz in standard measurement mode 25 Hz in MIN capture mode Material velocity range: 1000 to 9999 m/s; 0.039 to 0.394 inch/µs Power:Two 1.5V AA alkaline batteries Warning with low battery voltage Auto shut-off:After 5 minutes of non-use Operating temperature: -10℃ to +50℃; +14℉ to +122℉ Specification to -20℃/-4℉ on requ... shopify_US_849773035567 new 631.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41sWCcMhcGL_grande.jpg?v=1528151943 Graigar Dimensional Measurement yes 725370407630 0.0 kg Starrett 216RL-5 Digital Outside Micrometer, Ratchet Stop, Lock Nut, 4-5" Range, 0.001" Graduation, +/-0.00015" Accuracy https://jumboindustrial.com/products/starrett-216rl-5-digital-outside-micrometer-ratchet-stop-lock-nut-4-5-range-0-001-graduation-0-00015-accuracy Brand: StarrettFeatures: Tapered frame for measuring narrow slots and tight spacesMechanical digit counter for ease of reading to 0.001"Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementsSatin chrome finish on thimble and sleeve helps resist rust and reduce glareMicro-lapped steel measuring faces help provide accuracyPublisher: StarrettDetails: The Starrett 216RL series outside micrometer has a mechanical digit counter for ease of reading to 0.001”, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a black enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure ... shopify_US_849772707887 new 631.90 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31gvPMmAkNL_grande.jpg?v=1528151944 Starrett Dimensional Measurement yes 049659634709 0.0 kg Mitutoyo 126-141 Screw Thread Micrometer, Interchangeable Anvil-Spindle Tip, Ratchet Stop, 4-5" Range, 0.001" Graduation, +/-0.00025" Acc... https://jumboindustrial.com/products/mitutoyo-126-141-screw-thread-micrometer-interchangeable-anvil-spindle-tip-ratchet-stop-4-5-range-0-001-graduation-0-00025-accuracy Brand: MitutoyoFeatures: For use with V-anvil and conical spindle inserts for measuring pitch diameters of screw threads (sold separately)Vernier scale in inch units for taking precise outside diameter (OD) measurementsRatchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementSatin chrome finish on thimble and sleeve helps resist rust and reduce glareHammertone, baked enamel finish for protection and durability of framePublisher: MitutoyoDetails: The Mitutoyo 126 series screw thread micrometer is for use with V-anvil and conical spindle inserts for measuring pitch diameters of screw threads (sold separately). It also has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment.The micrometer’s frame has a Hammertone, baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer’s ratchet-stop mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position, while the anvil holder has a fine screw adjustment and locking device. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small d... shopify_US_849771986991 new 575.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41juc9Nj8NL_grande.jpg?v=1528151946 Mitutoyo Dimensional Measurement yes 4946368015842 0.0 kg Mitutoyo 329-351-10 LCD Depth Micrometer, Interchangeable Rod Type, 4" Base, With Output, 0-12"/0-304.8mm Range, 0.00005"/0.001mm Resolu... https://jumboindustrial.com/products/mitutoyo-329-351-10-lcd-depth-micrometer-interchangeable-rod-type-4-base-with-output-0-12-0-304-8mm-range-0-00005-0-001mm-resolution Brand: MitutoyoFeatures: Measurement range of 0 to 12" (0 to 304.8mm), and resolution of 0.00005" (0.001mm)LCD screen displays in U.S./metricIncludes 12 interchangeable measuring rods that can be adjusted in 1" (25mm) incrementsOrigin-set, preset, zero, data hold, and data output functions for flexibilitySatin chrome finish on the body for readability and hardened steel base for durability and accuracyPublisher: MitutoyoWarranty: ManufacturerDetails: The Mitutoyo 329-351-10 LCD Depth Micrometer, Interchangeable Rod Type, has a range of 0 to 12" (0 to 304.8mm), and a resolution (or smallest graduation interval) of 0.00005" (0.001mm). (See the product catalog for information on accuracy.) The LCD interface displays in both inches and metric. The gauge includes six measuring rods that can be adjusted in 1" (25mm) increments. The display has origin-set, preset, zero, data hold, and data output functions for the users' convenience. It has a satin chrome finish on the body for readability. The base is 4" (101.6mm) long and is made of hardened steel for durability and accuracy. This gauge has a ratchet stop and measuring rod clamp for precise measurements. The gauge conforms to European Conformity (CE) marking. The unit includes an SR44 battery and a protective plastic case, and the shipping weight is 3.61 lb. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth o... shopify_US_849771692079 new 956.82 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41MKlVp0ppL_grande.jpg?v=1528151946 Mitutoyo Dimensional Measurement yes 603908516538 0.0 kg Starrett 656-5041J Dial Indicator, 5.000-Inch Measuring Range, .001-Inch Graduation, 0-100 Dial Reading, AGD Group 4, Jeweled Bearings, L... https://jumboindustrial.com/products/starrett-656-5041j-dial-indicator-5-000-inch-measuring-range-001-inch-graduation-0-100-dial-reading-agd-group-4-jeweled-bearings-lug-on-center-back Brand: StarrettFeatures: Rugged and simple unit construction with a "universally fitting" designOne gear unit assemblyNon-reflecting white eggshell finish on dialUnbreakable crystalThe gear unit is constructed of a massive single bridge and plate assembly with a hardened stainless steel gear trainPublisher: StarrettDetails: Starrett 25, 655, 656 Series Dial Indicators with Long Range. These indicators have a shockless, hardened steel gear train and are furnished with jewel bearings and lug-on-center backs. Conforms to AGD specifications except for range. Stem cap supplied as standard. Furnished with continuous reading double dial with direct reading count hands.UPC: 049659538021EAN: 0049659538021 shopify_US_849771528239 new 671.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21pZy1uPCuL_grande.jpg?v=1528151946 Starrett Dimensional Measurement yes 049659538021 0.0 kg Starrett S3020Z Toolmakers' Grade Stainless Steel Square Set https://jumboindustrial.com/products/starrett-s3020z-toolmakers-grade-stainless-steel-square-set Brand: StarrettFeatures: Price For: EachPublisher: StarrettWarranty: ManufacturerDetails: This high quality toolmakers' square is not graduated and offers squareness accuracy to 0.0002" (0.005mm) for every 6" (150mm). The square feature stainless steel construction on both the blade and the beam. Both blade and beam are hardened, ground and lapped, with the beam machined at the inner corner for clearance of burr or dirt.UPC: 049659122299EAN: 0049659122299 shopify_US_849771298863 new 726.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31LL2htjIAL_grande.jpg?v=1528151947 Starrett Dimensional Measurement yes 049659122299 0.0 kg Starrett 685-2Z Inch Reading External Chamfer Gauge, 0-90 Degree Angle, 3/16" - 1" Range https://jumboindustrial.com/products/starrett-685-2z-inch-reading-external-chamfer-gauge-0-90-degree-angle-3-16-1-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designExternal gauges will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettDetails: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659636932EAN: 0049659636932 shopify_US_849770741807 new 589.06 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41gVJUY85LL_grande.jpg?v=1528151948 Starrett Dimensional Measurement yes 049659636932 0.0 kg Toy industry Accessibility Proble Safety standards Thorn Probe Test finger https://jumboindustrial.com/products/toy-industry-accessibility-proble-safety-standards-thorn-probe-test-finger Brand: GLTLPublisher: GLTLDetails: Instrument manufactured according to the relevant standards (16 CFR 1500.48、16 CFR 1500.49、EN-71,ASTM F963--96a,ISO8124--1:2000) Produced with high quality material and correct dimensionsEAN: 6169957544716 shopify_US_849770479663 new 637.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41rgwqDhqWL_grande.jpg?v=1528151948 GLTL Dimensional Measurement yes 6169957544716 0.0 kg Starrett 386-72 Draftsmens Steel Straight Edge With Bevel Edge, 72" Length, 2-5/8" Width, 7/64" Thickness https://jumboindustrial.com/products/starrett-386-72-draftsmens-steel-straight-edge-with-bevel-edge-72-length-2-5-8-width-7-64-thickness Brand: StarrettFeatures: Straight edges with bevel edgePublisher: StarrettDetails: These straight edges are thinner than our No. 385 Series (3/32" or 2.4mm) making them easier for draftsmen to use. Available in lengths up to 72" long. They have an attractive nickel plated finish, are beveled on one edge, and have a convenient hang-hole on one end.UPC: 049659514674EAN: 0049659514674 shopify_US_849770086447 new 636.82 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31uvLEHEimL_grande.jpg?v=1528151950 Starrett Dimensional Measurement yes 049659514674 0.0 kg VETUS INSTRUMENTS MT600 Multi-mode Through Coating Ultrasonic Thickness Gauge Meter Tester Pulse-Echo mode (0.65-600)mm (in Steel) Echo-E... https://jumboindustrial.com/products/vetus-instruments-mt600-multi-mode-through-coating-ultrasonic-thickness-gauge-meter-tester-pulse-echo-mode-0-65-600mm-in-steel-echo-echo-mode-3-100mm-in-steel-with-p5ee-probe-color-red Brand: VETUS INSTRUMENTSFeatures: ★ Multi-mode: Pulse-Echo mode (P-E mode) and Echo-Echo mode (E-E mode).★ Color TFT display (320×240 TFT LCD) with adjustable backlight, allow the user to work at worksites with low visibility.★ Non-volatile memory can store 100 groups of test thickness. One hundred records max for each group.★ With automatic screen standby, automatic sleep, automatic shutdown and power-saving functionsPublisher: VETUS INSTRUMENTSDetails: Shipping Policy : Battery and Liquid not included during the shippingThe model MT600 is a multi-mode ultrasonic thickness gauge. Based on the same operating principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy as high as 0.1/0.01 millimeters. The Multi-mode feature of the gauge allows the user to toggle between puluse-echo mode (flow and pit detection), and echo-echo mode ( eliminate paint or coating thickness ) Function andamp; application Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.Transducer models are available for special application, including for coarse grain material and high temperature applications. Technical Specifications *Measuring range: Pulse-Echo mode: (0.65-600)mm (in Steel) Echo-Echo mode: (3-100)mm (in steel with P5EE probe) *Resolution:0.1/0.01mm *Accuracy ±0.04mm (10mm); H refer to the thickness of workpiece ... shopify_US_849769988143 new 638.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/519QROQpFRL_grande.jpg?v=1528151951 VETUS INSTRUMENTS Dimensional Measurement yes 647904231422 0.0 kg Mitutoyo 368-995 Holtest (Type ll) Vernier Inside Micrometer, Complete Unit Set, 0.5-0.8" Range, 0.0002" Graduation, +/-0.0001" Accuracy ... https://jumboindustrial.com/products/mitutoyo-368-995-holtest-type-ll-vernier-inside-micrometer-complete-unit-set-0-5-0-8-range-0-0002-graduation-0-0001-accuracy-2-piece-set Brand: MitutoyoFeatures: Measurement range of 0.5 to 0.8" and precise to 0.0002", with + or - 0.0001" of accuracyThree alloyed-steel contact points for durabilityThree-point measurement method for direct measurement of holes and boresContact point geometry allows the instrument to measure to the bottom of blind holesSet includes two complete display units, setting ring, extension rod, and fitted plastic casePublisher: MitutoyoDetails: The Mitutoyo 368-995 Holtest Type II three-point internal micrometer set has alloyed-steel points, a measurement range of 0.5 to 0.8”, and is precise to 0.0002”, with + or - 0.0001” of accuracy. Alloyed-steel measuring contact points offer durability, while contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, setting ring, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measureme... shopify_US_849768972335 new 859.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/310ipk8-f0L_grande.jpg?v=1528151955 Mitutoyo Dimensional Measurement yes 4946368518077 0.0 kg Mitutoyo 505-748 D12"TXWW Dial Caliper, ID, OD Carbide, 0.1"/Rev, 0"-12", .001" https://jumboindustrial.com/products/mitutoyo-505-748-d12txww-dial-caliper-id-od-carbide-0-1-rev-0-12-001 Brand: MitutoyoFeatures: New designed dial movement for ultra smooth sliding and high shock protectionRemoval of Tin coating on sliding surfaces without sacrificing wear lifeLock screw for dial bezel and for holding the sliding jaw positionCan measure OD, ID, depth, and stepsPublisher: MitutoyoDetails: Mitutoyo 505-748 D12"TXWW, Caliper, Dial, Id, Od Carbide,.1"/Rev, 0-12",.001".EAN: 4946368688756 shopify_US_849768218671 new 496.70 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/211BehS8zRL_grande.jpg?v=1528151956 Mitutoyo Dimensional Measurement yes 4946368688756 0.0 kg D-600 https://jumboindustrial.com/products/d-600 Brand: TruscoFeatures: Measurement range (mm): 0 ~ 600 Instrumental error (mm): ± 0.08 Minimum display (mm): 0.01For the outer (mm): 100 For inside (mm): 37.5Manufacturer code: 151 054Publisher: ChinaDetails: ● I am easy to see in the digital display. ● It is with a preset function. ● vernier can fine movement Feed.EAN: 4975846037380 shopify_US_849767792687 new 1,214.21 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31NRnqXPkSL_grande.jpg?v=1528151956 Trusco Dimensional Measurement yes 4975846037380 0.0 kg Mitutoyo 103-907-40 Outside Micrometer Set with Standards, 0-6" Range, 0.0001" Resolution, 6 Pieces https://jumboindustrial.com/products/mitutoyo-103-907-40-outside-micrometer-set-with-standards-0-6-range-0-0001-resolution-6-pieces Brand: MitutoyoFeatures: Carbide-Tipped contact points for durability.Interchangeable anvils to perform close tolerance ID measurements.The Mitutoyo 103-907-40 Outside Mechanical Micrometer Set has a measuring range of 0-6" with .0001" Graduation and includes 5 Micromters 103-135, 103-136, 103-217, 103-218, 103-219 and 103-220 with 5 Micrometer Standards.Publisher: MitutoyoDetails: Vernier Outside Micrometer set includes standards, spanner wrench, and case. Micrometer Set, Micrometers Included 1, 2, 3, 4, 5, 6 In, Range 0 to 6 In, Resolution 0.0001 In, Thimble Type Friction/Ratchet, Includes 5 Standards, Spanner Wrenches, Carbide Faces, Positive Locking Clamp, Fitted CaseUPC: 603908560685EAN: 0603908525769 shopify_US_849767661615 new 731.53 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51QOsghupaL_grande.jpg?v=1528151957 Mitutoyo Dimensional Measurement yes 603908560685 0.0 kg 2" Electronic Theodolite https://jumboindustrial.com/products/2-electronic-theodolite Brand: Survey ProFeatures: Auto Vertical CompensatorLarge dual-sided LCD for clear readouts; 6-key user interface for simple operation30X magnification telescope, 55-inch minimum focusIncludes manual, batteries, tool kit, and carrying casePublisher: Omni Optical ProductsDetails: Telescope Image: Erect Magnification: 30x Objective aperture: 45mm Resolving power: 30″ Field of view: 1 30′ Minimum focus: 1.4m Multiplication constant: 100 Additive constant: 0 Tube length: 157mm Angle measurement Measuring mode: Absolute Encoding Diameter of circle: 79mm Minimum reading: 1 /5 (selectable) Accuracy: 2″ Detection method Horizontal angle: Dual Vertical angle: Dual Valid distance: 120m Display Type: 2 sides, LCD Display DATA I/O Interface: RS-232C Level Plate level: 30″/2mm Circular level: 8″/2mm Auto Vertical Compensator System: Liquid-electricd etection 4″ Accuracy: Liquid-electricd etection: 1″ Optical plummet Image: Erect Magnification: 3x Focusing range: 0.5m~∞ Field of view: 5′ Physical Characteristics Operating temperature: -20 C ~+45 C Battery: RechargeableN i-Hb attery/AAb attery Voltage: 6vD C Operating time: 10hours Dimension: 165mm 157mm 318mm Weight: 4.3kg Water and Dust Proof: IP 55 Avalable Color - Tan, Green *We will ship what we have in stock if not specifiedUPC: 794834403853EAN: 0794834403853 shopify_US_849767563311 new 638.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Ff-XMRLyL_grande.jpg?v=1528151957 Survey Pro Dimensional Measurement yes 794834403853 0.0 kg Mitutoyo 511-716 Dial Bore Gage, 250-400 mm,0.01 mm Graduation, Stem Diameter 8 mm with 2046SB Dial Indicator https://jumboindustrial.com/products/mitutoyo-511-716-dial-bore-gage-250-400-mm-0-01-mm-graduation-stem-diameter-8-mm-with-2046sb-dial-indicator Brand: MitutoyoFeatures: Carbide-tipped contact points for durabilityThe dial indicator is fully protected by a rugged coverOptional extension rods can be attached for measuring deep holesPublisher: Mitutoyo America CorporationRelease Date: 2017-05-15Details: Mitutoyo Dial Bore Gage 511-716, 250-400mm with2046SB dial indicator,0.01mm grad., stem 8mm diam.EAN: 4946368612553 shopify_US_849767432239 new 680.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Ov5ydXx_2BL_grande.jpg?v=1528151958 Mitutoyo Dimensional Measurement yes 4946368612553 0.0 kg Mitutoyo 133-903 Tubular Vernier Inside Micrometer, 2-6" Range, 0.001" Graduation, +/-0.00025" Accuracy (4 Piece Set) https://jumboindustrial.com/products/mitutoyo-133-903-tubular-vernier-inside-micrometer-2-6-range-0-001-graduation-0-00025-accuracy-4-piece-set Brand: MitutoyoFeatures: With locking clampZero point can be readjusted by rotating the micrometer head sleeve, a key wrench is suppliedClear, crisp graduations on the satin chrome finished micrometer headCarbide-tipped measuring facesWith fitted casePublisher: MitutoyoRelease Date: 2017-05-15Details: Set includes micrometers ranging from 2-6", 4 pieces in the set.EAN: 4946368018188 shopify_US_849767333935 new 598.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41YVOUka9JL_grande.jpg?v=1528151958 Mitutoyo Dimensional Measurement yes 4946368018188 0.0 kg Fowler 54-530-175-0` Sylvac Mark VI Electronic Indicator, 0-2" Measuring Range, 0.00005"/0.001 mm Resolution, 0.00019" Accuracy https://jumboindustrial.com/products/fowler-54-530-175-0-sylvac-mark-vi-electronic-indicator-0-2-measuring-range-0-00005-0-001-mm-resolution-0-00019-accuracy Brand: FowlerFeatures: Fowler Sylvac Mark VI electronic indicator with American Gage Design (AGD) Group 2 face and user-selectable 0.00005"/0.001mm or 0.0005/0.01mm resolution is designed for taking measurements in machining, layout, and inspection workNon-contact scale inductive measuring system has no moving parts and is insensitive to dust, dirt, oils and electrical or magnetic interferenceStainless steel shank and spindle, 4-48 UNF threading, aluminum housing with lug back, 3/8" mounting stem is Ingress Protection (IP)-67 rated for protection against water, coolant, oil, and dustHigh-contrast LCD with tolerance indicators, minimum, maximum, delta, Total Indicator Reading (TIR), display hold that retains reading for recording, and floating zero allows the indicator to be set to zero at any spindle locationStatistical Process Control (SPC) data collection with bidirectional RS-232C, USB, Digimatic, and wireless output transfers data to a computer (cable not included)Publisher: FowlerDetails: The Fowler Sylvac Mark VI electronic indicator has a 2-1/4" diameter high-contrast LCD with a choice of measuring range, four user-selectable resolutions of 0.00005", 0.0005", 0.001mm, and 0.01mm, a non-contact indicative measuring system, polyamide housing with a stainless steel shank and spindle, a 3/8" stem diameter, and a carbide contact point. The indicator performs inch/metric conversions, has a measuring speed of 1.5m/60" per second, and a repeatability of 2μm. The non-co... shopify_US_849767235631 new 1,185.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41x_2Bg-tGifL_grande.jpg?v=1528151958 Fowler Dimensional Measurement yes 646795173958 0.0 kg Starrett 689-1Z Inch Reading Countersink Gauge, 100 Degree Angle, 0.020-0.170" Range https://jumboindustrial.com/products/starrett-689-1z-inch-reading-countersink-gauge-100-degree-angle-0-020-0-170-range Brand: StarrettFeatures: All ground surfaces are of hardened toolIndicators are AGD designGauges furnished in deluxe padded casePublisher: StarrettDetails: Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.UPC: 049659637069EAN: 0049659637069 shopify_US_849766940719 new 682.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Ovfrq5qFL_grande.jpg?v=1528151959 Starrett Dimensional Measurement yes 049659637069 0.0 kg Mitutoyo 534-117 12" Vernier Caliperlong Jaw Ty https://jumboindustrial.com/products/mitutoyo-534-117-12-vernier-caliperlong-jaw-ty Brand: MitutoyoFeatures: 534-117Publisher: MITUTOYODetails: 12" Vernier Caliperlong Jaw TyUPC: 603908007081EAN: 0603908007081 shopify_US_849766875183 new 580.57 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Ffg32rXYL_aa5756b1-1491-4b6d-9f41-b0576260facb_grande.jpg?v=1528151959 Mitutoyo Dimensional Measurement yes 603908007081 0.0 kg INSIZE 6897-2 Granite V-Block Set, 3.9" x 2.0" x 2.8", Pair https://jumboindustrial.com/products/insize-6897-2-granite-v-block-set-3-9-x-2-0-x-2-8-pair Brand: INSIZEFeatures: Two v-blocks per set3.9" x 2.0" x 2.8" (lxwxh)GranitePublisher: INSIZEDetails: Granite v-block set, 3.9x2.0x2.8", pair.EAN: 6928640320606 shopify_US_849766055983 new 744.40 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/419RpSPoJgL_grande.jpg?v=1528151960 INSIZE Dimensional Measurement yes 6928640320606 0.0 kg Mitutoyo 543-396B Absolute LCD Digimatic Indicator ID-C, Standard Type, #4-48 UNF Thread, 0.375" Stem Dia., Flat Back, 0-0.5"/0-12.7mm Ra... https://jumboindustrial.com/products/mitutoyo-543-396b-absolute-lcd-digimatic-indicator-id-c-standard-type-4-48-unf-thread-0-375-stem-dia-flat-back-0-0-5-0-12-7mm-range-0-00005-0-001mm-graduation-0-0001-accuracy Brand: MitutoyoFeatures: Absolute Encoder ensures all settings and readings maintained for the life of the battery (even when the power is turned off)Preset, Zero-Set, inch/mm, +/- direction and GO/±NG functions SPC outputFace rotates 330° for use at various anglesCalculation function f(x)=Ax allows the spindle reading to be multiplied by a constant (ie 2X or .5X)Average battery life 7,000hours using SR-44 batteryPublisher: MitutoyoRelease Date: 2017-05-15Warranty: ManufacturerDetails: Mitutoyo Low Force IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: .500", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting directionUPC: 603908512387EAN: 0603908512387 shopify_US_849765859375 new 476.29 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41X_2BbHCXlpL_grande.jpg?v=1528151960 Mitutoyo Dimensional Measurement yes 603908512387 0.0 kg Mitutoyo 543-394 Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm... https://jumboindustrial.com/products/mitutoyo-543-394-absolute-lcd-digimatic-indicator-id-c-standard-type-m2-5x0-45-thread-8mm-stem-dia-lug-back-0-12-7mm-range-0-001mm-graduation-0-003mm-accuracy Brand: MitutoyoFeatures: As compact as standard series 2 dial indicators; Large, easy-to-read led, stem diameter 8mm, M2.5 x 0.45 ThreadGo/+/-NG Judgment can be performed by setting upper and lower tolerance limits; the judgment result (go/+/-ng) can be displayed in full-size charactersThe positive/negative count resulting from the spindle's up/down movement can be toggled. alarm for low voltage, counting value composition error, over-flow error, tolerance limit setting error, internal calculations using the simple formula of [F(x) = Ax)] are availableInternal calculations using the simple formula of [f(x) = ax)] are available. employing the absolute linear encoder, the id-c always displays the spindle "absolute position" from the origin at power-on. also unlimited response speed eliminates over-speed errorsThe ID-C Indicator face can be rotated 330 degree to an appropriate angle for easy reading. with spc data outputPublisher: MitutoyoRelease Date: 2017-05-15Details: Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).EAN: 4946368586526 shopify_US_849765597231 new 679.05 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41QM64ukZtL_grande.jpg?v=1528151961 Mitutoyo Dimensional Measurement yes 4946368586526 0.0 kg Mitutoyo 192-130 Dial Height Gauge, 0-300mm Range, 0.01mm Resolution, +/-0.03mm Accuracy, 4.2kg Mass https://jumboindustrial.com/products/mitutoyo-192-130-dial-height-gauge-0-300mm-range-0-01mm-resolution-0-03mm-accuracy-4-2kg-mass Brand: MitutoyoFeatures: Measurement range of 0 to 300 mm, and precise to 0.01 mmDial gauge with resettable up and down counters provides precise and easily read measurements in fine unitsLarge, hand-operated feed wheel provides smooth and even gauge travelCarbide-tipped scriber for hardness and long lifeGrip-base design for handheld comfortPublisher: MitutoyoDetails: The Mitutoyo 192-130 dial height gauge has a measurement range of 0 to 300 mm, and is precise to 0.01 mm, with + or - 0.03 mm of accuracy. The dial gauge has distinct, easily-read figures for precise measurement to 0.01 mm, and dual, resettable counters additionally measure discrete up and down distance changes, in 0.1 mm increments. A large, hand-operated feed wheel raises and lowers the gauge on the parallel beams with smooth, even travel. The included scriber, used to mark a position on a workpiece, is 80 mm (l) x 32 mm (h), carbide-tipped for hardness and long life, and is held to the gauge by a screw clamp for easy and secure fastening. The grip-base design provides comfort when holding the unit in position by hand. The dial and counters display large, easily-viewed figures. The mass (weight) of the height gauge is 4.2 kg. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached... shopify_US_849765466159 new 750.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/313krueAWFL_d3f123a2-e85f-4989-b351-c7b9b454c107_grande.jpg?v=1528151961 Mitutoyo Dimensional Measurement yes 4946368049076 0.0 kg 120g/0.0001g Analytical balance JJ124BC High-Precision Digital Balance Scale For Laboratory Pharmacy 120g/0.1mg 110v/220v https://jumboindustrial.com/products/120g-0-0001g-analytical-balance-jj124bc-high-precision-digital-balance-scale-for-laboratory-pharmacy-120g-0-1mg-110v-220v Brand: Hanchen Instrument®Features: Tare function and Automatic calibrationseven unit conversion and counting functionLCD digital display and 232 port data outputThe all-aluminum shell and Electromagnetic balancing type sensorRange 0-120g and Precision 0.1mg /110V OR 220VPublisher: Hanchen InstrumentDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description This kind of high-precision digital balance scale is very suitable for the laboratory and pharmacy. Features : Tare function Automatic calibration seven unit conversion counting function LCD digital display 232 port data output The all-aluminum shell Electromagnetic balancing type sensor data port connection with computer Temperature compensation function Technical Datas Capacity size : 0~120g Power supply voltage:220V/110V 50Hz/60Hz Resolution :0.1mg Pan size : Φ80mm Operating temperature :20±2℃ Operating Humidity :45~60%RH Net Weight :about 7 kg. NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us EAN: 8709759873775 shopify_US_849765040175 new 529.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41p0eEBTpML_88f4f0a5-cfcd-4aa7-9ad1-723168ed4593_grande.jpg?v=1528151968 Hanchen Instrument® Dimensional Measurement yes 8709759873775 0.0 kg RY-VA3301A Digital Handheld Optical Variable Attenuator 0~30dB https://jumboindustrial.com/products/ry-va3301a-digital-handheld-optical-variable-attenuator-0-30db Brand: Mandamp;A INSTRUMENTS INCFeatures: The lead time is about 3 days. FedEx/DHL shipping time is about 5-7 days.If any questions, please contact us via message.Publisher: Mandamp;A INSTRUMENTS INCDetails: Introduction: RY-VA3301 handhold optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator is used in the laser system for the on-line testing, there, therefore RY-VA3301 can be used in the digital system of communication devices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV) Applications: •Telecom Maintenance •CATV Maintenance •Comprehensive cable construction system •Optical instruments research and development •Optical communication education and lab testing •Other optical project Features •stepwise attenuating by circumgyrated dial: attenuating step 0.05dB •Provide with the function of displaying dB and dBm attenuating value •Alternative function of 10 minutes Auto-off without operation •After off the instruments, the system will have the memorizing of the attenuating value and the attenuating step, in order to restore the system back to the previous shut down state when open the instruments next time Technical Data •Model:RY-VA3301A •Attenuation range(dB):0~30 •Uncertainty: +-5% •Working temperature:-10~60oC •Storage temperature:-25~70oC •Auto turn off time(min):10 •Continue working time:More than 48 hours •Power:Rechargeable Li batteryUPC: 520361148970EAN: 05... shopify_US_849764384815 new 649.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31skuBuaUaL_cd67e469-1666-4fa0-a62a-980d61259067_grande.jpg?v=1528151969 M&A INSTRUMENTS INC Dimensional Measurement yes 520361148970 0.0 kg CNYST Upad X300 Digital Ultrasonic Thickness Gauge Through Coating Range 2 to 25mm Portable Ultrasonic Thickness Tester Meter with LCD Di... https://jumboindustrial.com/products/cnyst-upad-x300-digital-ultrasonic-thickness-gauge-through-coating-range-2-to-25mm-portable-ultrasonic-thickness-tester-meter-with-lcd-display-normal-mode-range-0-75-to-400mm Brand: CNYSTFeatures: ◆ Working principle: Ultrasound (ultrasonic pulse echo / echo echo); Display: LCD dot matrix display, High contrast 128X64 Beautiful characters Number, Symbol,High Brightness EL Backlight◆ Detection range: Normal mode: 0.75-400mm; Penetrate the coating: 2-25mm(Depending on the probe, the measured material and surface condition)◆ Resolution: 0.1mm(andgt; 100mm)/0.01mm( 100mm)/0.01mm( shopify_US_849763631151 new 529.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41KO2WnzzOL_grande.jpg?v=1528151969 Dimensional Measurement no 0.0 kg MT600 Multi-mode Ultrasonic Thickness Gauge Meter Tester Pulse-Echo mode (0.65-600)mm (in Steel) Echo-Echo mode (3-100)mm (in steel) with... https://jumboindustrial.com/products/mt600-multi-mode-ultrasonic-thickness-gauge-meter-tester-pulse-echo-mode-0-65-600mm-in-steel-echo-echo-mode-3-100mm-in-steel-with-p5ee-probe Brand: SULMILEFeatures: Multi-mode: Pulse-Echo mode (P-E mode) and Echo-Echo mode (E-E mode).Color TFT display (320×240 TFT LCD) with adjustable backlight, allow the user to work at worksites with low visibility.Non-volatile memory can store 100 groups of test thickness. One hundred records max for each group.With automatic screen standby, automatic sleep, automatic shutdown and power-saving functionsPublisher: MITECHDetails: Shipping Policy : Battery and Liquid not included during the shipping. And the calibration block in the listing picture is not the standard accessory. it will not come with the package. if you need it. please buy it in our store. The model MT600 is a multi-mode ultrasonic thickness gauge. Based on the same operating principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy as high as 0.1/0.01 millimeters. The Multi-mode feature of the gauge allows the user to toggle between puluse-echo mode (flow and pit detection), and echo-echo mode ( eliminate paint or coating thickness) Function andamp; Application Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.Transducer models are available for special application, including for coarse grain material and high temperature applications. Technical Specifications *Measuring range: Pulse-Echo mode:(0.65-600)mm (in Steel) Echo-Echo ... shopify_US_849763303471 new 643.41 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Ss_2BWc5YFL_grande.jpg?v=1528151970 SULMILE Dimensional Measurement yes 605175427074 0.0 kg UM-2D Digital Through Coating Ultrasonic Thickness Gauge 0.8mm to 300mm (Steel) 0.01mm/0.1mm Resolution w/ E-E Mode Echo-Echo https://jumboindustrial.com/products/um-2d-digital-through-coating-ultrasonic-thickness-gauge-0-8mm-to-300mm-steel-0-01mm-0-1mm-resolution-w-e-e-mode-echo-echo Brand: Mandamp;A INSTRUMENTS INCColor: BlackFeatures: The AA battery will not send to you because of air shipping regulation, please get it by yourselfThe couplant also can not send because of air shipping regulationPublisher: Mandamp;A INSTRUMENTS INCDetails: • Standard package: UM-2D thickness gauge PT-08 Probe Carrying case Two 1.5V AA alkaline batteries Couplant Operating manual Certification of quality Packaging list • Operating principle: Standard mode: P-E (pulse-echo) method with dual-element probes Coating mode: E-E (echo-echo) method with dual-element probes • Probe zero adjustment: Selectable: 1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision • V-path correction:Automatic • Measuring range: 0.8mm to 300mm; 0.031in to 11.81in in standard mode 3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode Depending on probe, material and surface condition • Digital resolution: H<4in : 0.001in /0.01in or 0.01mm/0.1mm H≥4in : 0.01in or 0.1mm • Units:Selectable: inch or mm • Display:128×64 dot-matrix LCD screen (1.65in×2.24in;42mm×57mm) EL backlight and switchable contract ratio Digit height:0.54in or 13.75mm • Material velocity range:1000 to 9999 m/s; 0.039 to 0.394 inch/µs • Power:Two 1.5V AA alkaline batteries Warning with low battery voltage • Operating time:Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode • Auto shut-off:After... shopify_US_849763139631 new 770.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41DzCaR83QL_grande.jpg?v=1528151970 M&A INSTRUMENTS INC Dimensional Measurement yes 519805775957 0.0 kg INSIZE 6863-150E Dial Gage Stand, Applicable Holding Stem, 3/8" Diameter https://jumboindustrial.com/products/insize-6863-150e-dial-gage-stand-applicable-holding-stem-3-8-diameter Brand: INSIZEFeatures: Vertical travel of holder: 5. 906 inchFine adjustment range: 079 inchAnvil: serrated, flatness 59µin. Hardness hrc 60+/- 2Publisher: INSIZEDetails: Dial gage stand, Applicable holding stem 3/8 inch diameter.EAN: 6928640358258 shopify_US_849763041327 new 746.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41zRgK-SK3L_grande.jpg?v=1528151970 INSIZE Dimensional Measurement yes 6928640358258 0.0 kg 0.87" - IP67 Digital Calipers, Brown and Sharpe Precision https://jumboindustrial.com/products/0-87-ip67-digital-calipers-brown-sharpe-precision Brand: Brown andamp; SharpeFeatures: TESA CAL IP67 RS 300 WITBROWN AND SHARPE PRECISIONIP67 Digital Calipers, 12 in/300 mmPublisher: BROWN AND SHARPE PRECISIONDetails: Unrivaled protection against the penetration of liquid or solid contaminantsUPC: 706398205798EAN: 0706398205798 shopify_US_849762844719 new 1,373.04 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21py7U8mrqL_grande.jpg?v=1528151971 Brown & Sharpe Dimensional Measurement yes 706398205798 0.0 kg Starrett 209RL Can Curl Micrometer, Ratchet Stop, Lock Nut, 0-0.500" Range, 0.0001" Graduation https://jumboindustrial.com/products/starrett-209rl-can-curl-micrometer-ratchet-stop-lock-nut-0-0-500-range-0-0001-graduation Brand: StarrettFeatures: Starrett satin chrome finish no glare resists rustAdvanced sleeve design with staggered lines and distinct figures for precise and easy readabilityQuick-reading figures every thousandth numbered on inch toolBalanced frame and thimble design insure easy handling and better readabilityRing-type knurled lock nut for quick and sure lockingPublisher: StarrettDetails: This Micrometer is a special rest foot and finger ring for consistent measurement of the curl thickness on aerosol cans with 1" diameter domed tops. Combination ratchet and speeder for uniform pressure and quicker adjustment. Finger ring for ease of measuring. Special rest foot to locate the tool for good accuracy. Extremely hard and stable one-piece spindle. Micro-lapped measuring faces. Quick and easy adjustment.UPC: 049659564730EAN: 0049659564730 shopify_US_849762746415 new 616.22 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41HjtWd10-L_grande.jpg?v=1528151971 Starrett Dimensional Measurement yes 049659564730 0.0 kg Mitutoyo 511-813 Dial Bore Gage with 2046SB Dial, 60-100mm Range, 8mm Gage Stem Diameter https://jumboindustrial.com/products/mitutoyo-511-813-dial-bore-gage-with-2046sb-dial-60-100mm-range-8mm-gage-stem-diameter Brand: MitutoyoFeatures: Total measurement range of 60 to 100 mmGradient spacing of .01 mmGrip reduces influence of heat to retain high-accuracy measurementTwo-point contact for detection of geometry problems such as ovality and taperCarbide-tipped contact points for extended wear and improved abrasion resistancePublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 511-813 Bore Gauge with 2046SB Dial has a measurement range of 60 to 100 mm and gradient spacing of .01 mm. The grip reduces the influence of heat from the operator's hand during use to retain high-accuracy measurement. This gauge uses a two-point contact system for the detection of geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contac... shopify_US_849762680879 new 653.67 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_57101314-c363-4b13-b56d-3c756b061aba_grande.jpg?v=1528151971 Mitutoyo Dimensional Measurement yes 603908560708 0.0 kg VETUS INSTRUMENTS DR87 Portable Ultrasonic Thickness Gauge Through Coating Type with LCD Display Ultrasonic Thickness Measuring Tools https://jumboindustrial.com/products/vetus-instruments-dr87-portable-ultrasonic-thickness-gauge-through-coating-type-with-lcd-display-ultrasonic-thickness-measuring-tools Brand: VETUS INSTRUMENTSFeatures: Through the coating thickness: no need to clear the surface of the object to be tested, such as paint, plastic and other attachments to measure the thickness of the substrateThrough coating measurement range: 3 mm ~ 20 mmCommon measurement mode: 0.7-400mmMaterial velocity: 509 ~ 18699m/sDisplay mode: 128 * 64 dot matrix LCD screenPublisher: VETUS INSTRUMENTSDetails: Shipping Policy : Battery and Liquid not included during the shippingDR87 ultrasonic thickness gauge (through the coating thickness) nondestructive testing, no need to clear the surface of the object to be measured on the surface of the coating and non-metallic attachments can be measured thickness Technical Specifications *Through coating measurement range: 3 mm ~ 20 mm *Common measurement mode: 0.7-400mm *Material velocity: 509 ~ 18699m/s *Measurement accuracy: ±(0.5%H+0.05)mm *Display accuracy: 0.01mm or 0.1mm *Scanning speed: 2 ~ 20 times/sec. *Frequency bandwidth: 1 ~ 10MHz *Lower limit of pipe measurement: (depending on the probe configuration)Φ15mm×1.0mm (probe: 5MHz, Φ10mm); Φ10mm×1.2mm (probe: 7.5MHz, Φ6mm) *Power supply: dual AA (5) battery(Battery not included in the package) *Working time: 280 hours (automatic mode), 100 hours (backlit) *Display mode: 128 * 64 dot matrix LCD screen *Dimensions: 136 (L) x 72 (W) * 20(H) mm *Weight: 176g (including battery) *Operating temperature: -10℃~50℃ *Probe Zero Auto calibration*Optional Accessories: software and communicat... shopify_US_849762582575 new 653.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/410GxC6MDYL_grande.jpg?v=1528151972 VETUS INSTRUMENTS Dimensional Measurement yes 647904230708 0.0 kg Depth Gage, 6 In, 4 In Base, Ratchet https://jumboindustrial.com/products/depth-gage-6-in-4-in-base-ratchet Brand: StarrettFeatures: This vernier micrometer features a ratchet thimble and a casePublisher: L.S. StarrettDetails: This vernier micrometer features a ratchet thimble and a case. This listing is for each. Technical Specification Item Depth Micrometer SPC Output No Base Style Full Range 0 to 6' Resolution 0.001' Base Length 4' Number of Measuring Rods 6 Long Form Calibration Certificate No Thimble Ratchet Anvil Flat Rod Type Adjustable, Solid Spindle Flat Movement of Screw 1' Rod Dia. 5/32' Rotating Spindle (Yes/No) No Anvil Material Hardened Steel Spindle Material Hardened Steel Lock Nut Type Ring Includes Spanner, Fitted CaseUPC: 094704970417EAN: 0094704970417 shopify_US_849762484271 new 448.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21LN9yTBnSL_grande.jpg?v=1528151972 Starrett Dimensional Measurement yes 094704970417 0.0 kg INSIZE 1135-601 Electronic Caliper, 0" - 24" https://jumboindustrial.com/products/insize-1135-601-electronic-caliper-0-24 Brand: INSIZEFeatures: Resolution: 0005 inchButton function: on/off, zero, inch/mm, abs, data presetBattery Cr2032. Data output. Made of stainless steelPublisher: INSIZEDetails: Electronic caliper, 0-24"/0-600mm.EAN: 6928640301643 shopify_US_849762353199 new 465.54 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21Xs1EvvU5L_2f67e408-3056-4d0d-b81a-7d870b04ee15_grande.jpg?v=1528151972 INSIZE Dimensional Measurement yes 6928640301643 0.0 kg Mitutoyo 511-756 Dial Bore Gage, 10 to 16", Stem Diameter 3/8", 0.0001" Graduationwith 2923SB-10 Dial Indicator https://jumboindustrial.com/products/mitutoyo-511-756-dial-bore-gage-10-to-16-stem-diameter-3-8-0-0001-graduationwith-2923sb-10-dial-indicator Brand: MitutoyoFeatures: Carbide-tipped contact points for durabilityThe dial indicator is fully protected by a rugged coverOptional extension rods can be attached for measuring deep holesPublisher: Mitutoyo America CorporationDetails: Mitutoyo Dial Bore Gage 511-756, 10-16 In, with2923SB-10 dial indicator, 0.0001 In graduation, stem 3/8 In diam.EAN: 4946368613376 shopify_US_849762091055 new 640.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31GWeaGvVHL_grande.jpg?v=1528151974 Mitutoyo Dimensional Measurement yes 4946368613376 0.0 kg Johnson Level and Tool 40-6683 Line and Dot Laser by Johnson Level and Tool https://jumboindustrial.com/products/johnson-level-tool-40-6683-line-and-dot-laser-by-johnson-level-tool Features: Johnson Level andamp; Tool 40-6683 Line and Dot Laser by Johnson Level andamp; ToolClass 3A Laser and shopify_US_849760354351 new 415.67 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Q2l4j5YkL_grande.jpg?v=1528151976 Dimensional Measurement no 0.0 kg Starrett 684M-4Z Millimeter Reading Internal Chamfer Gauge With Yellow Dial, 90-127 Degree Angle, 25-50mm Range https://jumboindustrial.com/products/starrett-684m-4z-millimeter-reading-internal-chamfer-gauge-with-yellow-dial-90-127-degree-angle-25-50mm-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designInternal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659649963EAN: 0049659649963 shopify_US_849759928367 new 639.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/4193bgRQ22L_grande.jpg?v=1528151977 Starrett Dimensional Measurement yes 049659649963 0.0 kg Mitutoyo 547-400S Digimatic IDC Thickness Gage, Flat Anvil, High Accuracy Type, 0 - 0.47"/0-12mm Range, 0.00005"/0.001mm Resolution, +/-0... https://jumboindustrial.com/products/mitutoyo-547-400s-digimatic-idc-thickness-gage-flat-anvil-high-accuracy-type-0-0-47-0-12mm-range-0-00005-0-001mm-resolution-0-00015-accuracy Brand: MitutoyoFeatures: Measuring force 3.5N or lessDigimatic IDC indicator5,000 Hours Battery Life Under Normal ConditionsFlat AnvilHigh AccuracyPublisher: MitutoyoDetails: Mitutoyo 547-400S IDC Digimatic Thickness Gage, Flat Anvil, High Accuracy Type, 0 - 0.47"/0-12mm Range, .00005"/0.001mm Resolution, +/-0.00015" AccuracyUPC: 603908514930EAN: 4946368599533 shopify_US_849759633455 new 730.14 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41YL3-vbL1L_grande.jpg?v=1528151977 Mitutoyo Dimensional Measurement yes 603908514930 0.0 kg Mitutoyo 543-280B Absolute LCD Digimatic Indicator ID-C, M2.X0.45 Thread, 8mm Stem Dia., Flat Back, 0-12.7mm Range, 0.001mm Graduation, +... https://jumboindustrial.com/products/mitutoyo-543-280b-absolute-lcd-digimatic-indicator-id-c-m2-x0-45-thread-8mm-stem-dia-flat-back-0-12-7mm-range-0-001mm-graduation-0-003mm-accuracy Brand: MitutoyoFeatures: With the max./min. Value holding function, the signal id-c can output the signal of the go/+/-ng judgment result against the peak values set. Substitute for the mechanical/ electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustmentThe signal can be output to an external device like a sequencer through the npn open-collectorThe go/+/-ng judgment result is also indicated by the green/red led and the "" signs on led, Stem diameter 8mm, M2. - 0.45 thread sizeEmploying the absolute linear encoder, the signal id-c always displays the spindle "absolute position" from the origin at power-on, Stem diameter 8mm, M2. -0.45 thread sizeThe signal id-c achieves the ip54 protection level to resist dust and contaminants for safe operation in harsh machine shop environmentsPublisher: MitutoyoRelease Date: 2017-05-15Details: Accuracy: Refer to the list of specifications. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Data output (-NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit ... shopify_US_849758814255 new 606.70 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41MvuNkPO1L_648d704a-9f8b-49ca-8d77-4e3796d14722_grande.jpg?v=1528151979 Mitutoyo Dimensional Measurement yes 4946368364186 0.0 kg Mitutoyo 543-282B Absolute Digimatic Indicator, ID-C Type, Inch/Metric, #4-48 UNF Thread, 3/8" Stem Dia., Flat Back, 0-0.5" (0-12.7mm Ran... https://jumboindustrial.com/products/mitutoyo-543-282b-absolute-digimatic-indicator-id-c-type-inch-metric-4-48-unf-thread-3-8-stem-dia-flat-back-0-0-5-0-12-7mm-range-0-00005-0-001mm-resolution-0-00012-accuracy-meets-ip54-specifications Brand: MitutoyoFeatures: Electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.00005" (0.001mm) resolution and + or - 0.00012" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications in harsh environmentsLCD screen displays measurements in inches and metric units, and go/no-go display lights red or green when upper and lower tolerances have been setStem has 3/8" diameter and a #4-48 UNF contact point thread mount, and unit has a flat back for stem/plate mountingAbsolute electrostatic capacitance-type linear encoder for accurate measurementsIngress Protection certified IP54 for protection against dust and waterPublisher: MitutoyoDetails: The Mitutoyo 543-282B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications in harsh environments. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.00012". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed... shopify_US_849757929519 new 662.05 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41fYcLlEnhL_grande.jpg?v=1528151980 Mitutoyo Dimensional Measurement yes 4946368364148 0.0 kg Starrett 387-48 Steel Straight Edge With Bevel And Graduated Edge, 48" Length, 2-13/32" Width, 7/32" Thickness https://jumboindustrial.com/products/starrett-387-48-steel-straight-edge-with-bevel-and-graduated-edge-48-length-2-13-32-width-7-32-thickness Brand: StarrettFeatures: No. 387 Series with bevel, graduationsAccuracy (in): ± .0002 inch per footPublisher: StarrettDetails: These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.UPC: 049659514728EAN: 0049659514728 shopify_US_849757634607 new 700.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31VIzCOltjL_grande.jpg?v=1528151981 Starrett Dimensional Measurement yes 049659514728 0.0 kg Mitutoyo 326-352-30 TMC-2"MX Micrometer https://jumboindustrial.com/products/mitutoyo-326-352-30-tmc-2mx-micrometer Brand: MitutoyoFeatures: Interchangeable Anvil-SpindleWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoDetails: Mitutoyo 326-352-30 Tmc-2"MX, Tmc-2"MX.EAN: 4946368695815 shopify_US_849757208623 new 725.84 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/513Iyq6PfrL_grande.jpg?v=1528151982 Mitutoyo Dimensional Measurement yes 4946368695815 0.0 kg Mitutoyo ABSOLUTE 573-651 Digital Caliper, Battery Powered, Neck Style Jaw, 0-150mm Range, +/-0.03mm Accuracy, 0.01mm Resolution, Meets I... https://jumboindustrial.com/products/mitutoyo-absolute-573-651-digital-caliper-battery-powered-neck-style-jaw-0-150mm-range-0-03mm-accuracy-0-01mm-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Hardened stainless steel construction for protection of caliper componentsFlat type jaws for outside dimensions (OD) measurements of grooves and recessesFunction control buttons on caliper face for ease of access: Origin-set, Zero-setting, Power On/Off, Data OutputRated IP67 for resistance to penetration by dust and submersion in liquidStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately)Publisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 573 series digital neck caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has flat type jaws for outside dimension (OD) measurements of grooves and recesses. This caliper has accessible function control buttons, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, this digital caliper’s LCD increases readability. The 573 series caliper has the ABSOLUTE electrostatic capacitance type linear encoder to help reduce overspeed errors. LCD resolution is 0.01mm. Functions include origin-setting, zero-setting, power on/off automatic shutoff, and data output. This caliper has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. An alarm alerts the user to low voltage and counting value composition errors. A rollin... shopify_US_849756291119 new 709.69 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31DqNYwxmXL_grande.jpg?v=1528151987 Mitutoyo Dimensional Measurement yes 4946368567617 0.0 kg The rotary viscometer (pointer) NDJ-1 type viscometer https://jumboindustrial.com/products/the-rotary-viscometer-pointer-ndj-1-type-viscometer Brand: HuanyuFeatures: viscosity measurement range: 10 ~ 100000mPa - Smeasurement error: 5% (Newton type liquid)determination of the rotor: 4 ~ four 1 kinds of rotorrotate speed: 6r/min, 12r/min, 30r/min, 60r/minpower: 220V AC 10% 50HzPublisher: HuanyuDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed. Description The instrument is suitable for measuring the viscosity of liquid viscosity and the absolute viscosity of the liquid, the instrument with 4 - four 1 kinds of rotor, can be measured according to the high and low speed of the liquid viscosity. Technical Parameters 1, viscosity measurement range: 10 ~ 100000mPa - S 2, measurement error: 5% (Newton type liquid) 3, determination of the rotor: 4 ~ four 1 kinds of rotor 4, rotate speed: 6r/min, 12r/min, 30r/min, 60r/min 5, power: 220V AC 10% 50Hz 6, appearance size: 300 x 300 x 450mm 7, net weight: 1.5kg (not included) 8, select accessories: HWY-10 multifunction thermostatic water bath; rotor 0; constant temperature water glass cup NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us.EAN: 6021518301872 shopify_US_849755832367 new 669.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21F0S8yjBVL_grande.jpg?v=1528151988 Huanyu Dimensional Measurement yes 6021518301872 0.0 kg Starrett C404R-48 W/SLC Heavy Spring Tempered Steel Rule With Inch Graduations, 4R Style Graduations, 48" Length 1-1/2" Width, 1/10" Thic... https://jumboindustrial.com/products/starrett-c404r-48-w-slc-heavy-spring-tempered-steel-rule-with-inch-graduations-4r-style-graduations-48-length-1-1-2-width-1-10-thickness Brand: StarrettFeatures: Quick-Reading graduations for fast measurementsStandard letter of certification to ensure the rule is inspected and accurate to specificationsMachine-divided graduations for accuracy and durabilityFurnished with hole in end for hangingWith standard letter of certificationPublisher: StarrettDetails: Starrett 48" heavy spring-tempered steel rules with Inch graduations feature a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. Features single row of inch figures.UPC: 049659668896EAN: 0049659668896 shopify_US_849754718255 new 670.17 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41snuZN8oAL_grande.jpg?v=1528151990 Starrett Dimensional Measurement yes 049659668896 0.0 kg Starrett S253Z Dial Indicator Set, Set of 3-Inch Reading Dial Indicators: 25-111J, 25-131J and 25-441J, AGD Group 2, Jeweled Bearings, Lu... https://jumboindustrial.com/products/starrett-s253z-dial-indicator-set-set-of-3-inch-reading-dial-indicators-25-111j-25-131j-and-25-441j-agd-group-2-jeweled-bearings-lug-on-center-back Brand: StarrettFeatures: Rugged and simple unit construction with a "universally fitting" designOne gear unit assemblyNon-reflecting white eggshell finish on dialUnbreakable crystalThe gear unit is constructed of a massive single bridge and plate assembly with a hardened stainless steel gear trainPublisher: StarrettDetails: The Starrett S253Z Dial Indicator Set with Jewel Bearing provides in one handy, compact kit three 25 Series Dial Indicators to handle most gaging jobs at a minimum cost. Sets are ideal for tool and die shops, machine shops and toolrooms having occasional work where a heavy investment in dial indicators would not be practical. Easy readability with the best, balanced style of graduation and number combination. Balanced and tapered hands are easy to follow.UPC: 049659512182EAN: 0049659512182 shopify_US_849754325039 new 473.22 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51HxKvX4q4L_grande.jpg?v=1528151990 Starrett Dimensional Measurement yes 049659512182 0.0 kg Starrett 686-2Z Inch Reading External Chamfer Gauge, 90-127 Degree Angle, 3/16"-1" Range https://jumboindustrial.com/products/starrett-686-2z-inch-reading-external-chamfer-gauge-90-127-degree-angle-3-16-1-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designExternal gauges will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659636963EAN: 0049659636963 shopify_US_849754292271 new 635.34 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41iYDkrTCoL_grande.jpg?v=1528151991 Starrett Dimensional Measurement yes 049659636963 0.0 kg Starrett CB48-4R Combination Square Blade With Inch Graduations, Sets And Bevel Protractors, Satin Chrome Finish, 4R Graduation, 1" Width... https://jumboindustrial.com/products/starrett-cb48-4r-combination-square-blade-with-inch-graduations-sets-and-bevel-protractors-satin-chrome-finish-4r-graduation-1-width-3-32-thickness-48-size Brand: StarrettFeatures: Graduation: No. 4R - 1/8", 1/16", quick reading 1/32", 1/64"Publisher: StarrettRelease Date: 2017-03-12Details: The blade fit any head according to the sizes of all combination squares, combination sets and bevel protractors.UPC: 049659671025EAN: 0049659671025 shopify_US_849754062895 new 639.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41P2hWCGr_2BL_grande.jpg?v=1528151991 Starrett Dimensional Measurement yes 049659671025 0.0 kg Starrett 777XFLZ Electronic Bench Micrometer with Output and with Standard Inch Graduations on Shell and Thimble https://jumboindustrial.com/products/starrett-777xflz-electronic-bench-micrometer-with-output-and-with-standard-inch-graduations-on-shell-and-thimble Brand: StarrettFeatures: Works well with Starrett Datasure Wireless Data Collection SystemsExtremely hard and stable one-piece spindleLarge, easy-to-read, high-contrast LCD digital readoutConventional inch or millimeter graduations standardNo-glare black wrinkle finishPublisher: StarrettRelease Date: 2017-05-15Details: The Starrett 777 Electronic Bench Micrometer (with Output) with Standard Millimeter Graduations on Shell and Thimble features 0-25mm/0-1-Inch range, and carbide face with case.UPC: 049659671353EAN: 0049659671353 shopify_US_849753833519 new 1,282.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41hyrJoGblL_grande.jpg?v=1528151992 Starrett Dimensional Measurement yes 049659671353 0.0 kg Starrett 756FL-1 LCD Disc-Type Micrometer, Friction Thimble, Lock Nut, 0-1" Range, 0.00005" Graduation https://jumboindustrial.com/products/starrett-756fl-1-lcd-disc-type-micrometer-friction-thimble-lock-nut-0-1-range-0-00005-graduation Brand: StarrettFeatures: Without case; large, right-sized, high-contrast LCD digital readout is easy to read and reduces errorsAttractive no-glare black wrinkle finish on the frameStarrett no-glare satin chrome finish on thimble and sleeveStarrett designed electronic microprocessorOne 3-volt battery furnished for dependable power and over one year normal usagePublisher: StarrettDetails: This electronic readout disc type micrometer is used to measure the thickness of work sections such as ribs, lands, fins, cutting edges on form tool and chordal thickness of gear teeth. Because of their large anvil and spindle face, the 25mm size is useful for measuring the thickness of sheet materials like paper, cardboard, rubber, and plastics. The combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes. Gracefully designed tapered frame for use in narrow slots and tight places. Anvil and spindle discs are12.7mm diameter tapering to 0.15" (0.4mm) edge thickness making it possible to enter narrow grooves and recesses. Rigid one-piece frame of drop forged steel. Extremely hard and stable one-piece spindle. Micro-lapped measuring faces. Quick and easy adjustment. Starrett workmanship. This tool is accurate to +/-0.00015" or +/-0.003mm measuring over the whole surface and +/-.0002" or +/-0.004mm measuring on the edge. Automatic OFF after 30 minutes of nonuse. Measurement HOLD button. Ability to zero tool at any position. Ability to retain and return to th... shopify_US_849753735215 new 749.08 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31miQqbXGSL_grande.jpg?v=1528151992 Starrett Dimensional Measurement yes 049659640427 0.0 kg Starrett 823FZ Tubular Inside Micrometer https://jumboindustrial.com/products/starrett-823fz-tubular-inside-micrometer Brand: StarrettFeatures: Rods are rigid and lightweight5-1/2-Inch (140mm) long handle furnishedEach rod is marked with lengthHardened and ground anvilsInterchangeable anvilsPublisher: StarrettDetails: The Starrett 823 Tubular Inside Micrometer Set features .001-Inch graduation, with 10 rods and handle, 1-1/2-32-Inch range, and 1/2 and 1-Inch movement of screw.UPC: 049659530582EAN: 0049659530582 shopify_US_849753636911 new 735.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51vDsqTnnwL_grande.jpg?v=1528151992 Starrett Dimensional Measurement yes 049659530582 0.0 kg Mitutoyo 209-912 Caliper Gauge with Ball Jaw, 0-50 mm Range, +/-0.05 mm Accuracy, 0.05 mm Resolution, White Face https://jumboindustrial.com/products/mitutoyo-209-912-caliper-gauge-with-ball-jaw-0-50-mm-range-0-05-mm-accuracy-0-05-mm-resolution-white-face Brand: MitutoyoFeatures: Outside dimension (OD) measurement capability for measuring groove and tube thicknessSpring-loaded for point contact at constant measuring pressureDial display provides precise, readable measurements in metric unitsLarge measuring depth for hard-to-reach external dimensionsRated IP65 for resistance to penetration by dust, and to liquid up to the force of a low-pressure water jetPublisher: MitutoyoDetails: Dial Caliper Gauge, External Measurement Type, Ball Jaw, White Face, 0-50mm Range, +/-0.05mm Accuracy, 0.05 mm Resolution.UPC: 603908577881EAN: 0603908577881 shopify_US_849753571375 new 709.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_fac6d3f0-d4b9-4abf-a23b-afafbe8beca3_grande.jpg?v=1528151992 Mitutoyo Dimensional Measurement yes 603908577881 0.0 kg Mitutoyo 209-911 Dial Caliper Gage, External, 0-50 mm, 167 mm Depth https://jumboindustrial.com/products/mitutoyo-209-911-dial-caliper-gage-external-0-50-mm-167-mm-depth Brand: MitutoyoFeatures: The caliper is spring loaded and makes point contact at constant measuring pressureUse with a setting ring or a micrometerExternal measurement Type, IP65Publisher: KroeplinDetails: Dial caliper gage, external, 0-50mm, 167mm depthUPC: 603908577102EAN: 0603908577102 shopify_US_849753440303 new 674.24 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_3f55a8b1-b0df-4553-92dd-9fe25643f8be_grande.jpg?v=1528151993 Mitutoyo Dimensional Measurement yes 603908577102 0.0 kg Mitutoyo 209-917 Dial Caliper Gage, 0-2.0", 0.001", 169 mm Depth with External Measurement https://jumboindustrial.com/products/mitutoyo-209-917-dial-caliper-gage-0-2-0-0-001-169-mm-depth-with-external-measurement Brand: MitutoyoFeatures: External Tube ThicknessProvides error-free LCD readingsPublisher: Mitutoyo America CorporationDetails: Mitutoyo Dial Caliper Gage 209-917, External Measurement Type, 0-2.0 In, .001 In, 169mm Depth.UPC: 603908577362EAN: 0603908577362 shopify_US_849753407535 new 704.57 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_6bf9dc21-39a7-4a9e-9576-5b249340c87a_grande.jpg?v=1528151993 Mitutoyo Dimensional Measurement yes 603908577362 0.0 kg Mitutoyo 368-991 Holtest (Type ll) Vernier Inside Micrometer, Complete Unit Set, 12-20mm Range, 0.005mm Graduation, +/-0.002mm Accuracy https://jumboindustrial.com/products/mitutoyo-368-991-holtest-type-ll-vernier-inside-micrometer-complete-unit-set-12-20mm-range-0-005mm-graduation-0-002mm-accuracy Brand: MitutoyoFeatures: Measurement range of 12 to 20 mm and precise to 0.005 mm, with + or - 2 micrometers of accuracyThree alloyed-steel contact points for durabilityThree-point measurement method for direct measurement of holes and boresContact point geometry allows the instrument to measure to the bottom of blind holesSet includes two complete display units, setting ring, extension rod, and fitted plastic casePublisher: MitutoyoDetails: The Mitutoyo 368-991 Holtest Type II three-point internal micrometer set has alloyed-steel points, a measurement range of 12 to 20 mm, and is precise to 0.005 mm, with + or - 2 micrometers of accuracy. Alloyed-steel measuring contact points offer durability, while contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, a setting ring, extension rod, and fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the h... shopify_US_849752719407 new 1,120.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51qEeD2giiL_grande.jpg?v=1528151994 Mitutoyo Dimensional Measurement yes 4946368518039 0.0 kg 5 3/8-4 UN Thread Plug Gage 2B GO NOGO 100% Calibrated ship by by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-3-8-4-un-thread-plug-gage-2b-go-nogo-100-calibrated-ship-by-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 3/8-4 UN thread plug gageClass of fit: 2B including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Taperlock, double ends with handlewe will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 3/8-4 UN thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769024877EAN: 0763769024877 shopify_US_849752031279 new 675.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BnUHixVpL_0fe42a23-05fa-4d24-98c2-dd714c34b23f_grande.jpg?v=1528151995 Linsen Dimensional Measurement yes 763769024877 0.0 kg Mitutoyo 227-211 ABSOLUTE Digimatic LCD Micrometer, Friction Thimble, 0-0.6"/0-15mm Range, 0.00005"/0.001mm Graduation, -0.0001" Accuracy... https://jumboindustrial.com/products/mitutoyo-227-211-absolute-digimatic-lcd-micrometer-friction-thimble-0-0-6-0-15mm-range-0-00005-0-001mm-graduation-0-0001-accuracy-0-5-2-5n-measuring-force Brand: MitutoyoFeatures: Digital, single-value readout LCD displays in inch and metric units for readabilityStatistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately)Electrostatic capacitance linear encoder helps ensure repeatable, precise measurementAdjustable measuring force helps accommodate a variety of workpiece materialsSpindle feeds at a higher rate than conventional mechanism for productivityPublisher: MitutoyoDetails: The Mitutoyo 227 series ABSOLUTE Digimatic LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. A knurled friction thimble helps provide quick adjustment capability, and an adjustable measuring force helps accommodate a variety of workpiece materials. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a spindle that feeds at a rate of 0.4” (10mm) per revolution for productivity. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An output jack transmits Statistical Process Control (SPC) data results to a computer or external device throug... shopify_US_849751474223 new 909.72 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31o7VoV-w5L_grande.jpg?v=1528151996 Mitutoyo Dimensional Measurement yes 4946368392936 0.0 kg Starrett S436.1AXRLZ 436.1 Series Outside Micrometer Set, Ratchet Stop, Lock Nut, Carbide Faces, 0-3" Range, 0.001" Graduation https://jumboindustrial.com/products/starrett-s436-1axrlz-436-1-series-outside-micrometer-set-ratchet-stop-lock-nut-carbide-faces-0-3-range-0-001-graduation Brand: StarrettFeatures: This set includes 1", 2" and 3" micrometers with two standards in caseAdvanced sleeve design with staggered lines and distinct figures for precise and easy readabilityBalanced frame and thimble design insure easy handlingGracefully designed tapered frame for use in narrow slots and tight placesMicro-lapped carbide measuring faces, quick and easy adjustmentPublisher: StarrettRelease Date: 2017-05-15Details: Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments, and wherever gaging involves a wide range of measurements. All sets come with attractive, protective cases which keep micrometers and standards together, readily accessible. Rigid and stable special cast iron frame with perforations for lightness and ribbed for strength and stability.UPC: 049659680362EAN: 0049659680362 shopify_US_849751375919 new 480.48 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41U7w54kZBL_grande.jpg?v=1528151996 Starrett Dimensional Measurement yes 049659680362 0.0 kg Starrett S436.1MAXRLZ 436.1 Series Outside Micrometer Set, Ratchet Stop, Lock Nut, Carbide Faces, 0-75mm Range, 0.01mm Graduation https://jumboindustrial.com/products/starrett-s436-1maxrlz-436-1-series-outside-micrometer-set-ratchet-stop-lock-nut-carbide-faces-0-75mm-range-0-01mm-graduation Brand: StarrettFeatures: This set includes 25mm, 50mm and 75mm micrometers with two standards in caseAdvanced sleeve design with staggered lines and distinct figures for precise and easy readabilityBalanced frame and thimble design insure easy handlingGracefully designed tapered frame for use in narrow slots and tight placesMicro-lapped measuring faces, quick and easy adjustmentPublisher: StarrettDetails: Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments, and wherever gaging involves a wide range of measurements. All sets come with attractive, protective cases which keep micrometers and standards together, readily accessible. Rigid and stable special cast iron frame with perforations for lightness and ribbed for strength and stability.UPC: 049659680683EAN: 0049659680683 shopify_US_849751212079 new 717.58 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51kLyHcYtOL_grande.jpg?v=1528151996 Starrett Dimensional Measurement yes 049659680683 0.0 kg Mitutoyo 389-351 Digital Outside Micrometer, 6" Throat Depth, 0 to 1"/0 to 25.4mm Range, 0.00005"/0.001mm Resolution, Ratcheting Thimble ... https://jumboindustrial.com/products/mitutoyo-389-351-digital-outside-micrometer-6-throat-depth-0-to-1-0-to-25-4mm-range-0-00005-0-001mm-resolution-ratcheting-thimble-stop-lcd-spc-data-output-inch-metric Brand: MitutoyoFeatures: Measures 0 to 1"/0 to 25.4mm with 0.00005"/0.001mm resolution and 0.0002" accuracy for measuring thickness of material such as sheet metal, paper, and plastic6" throat depth for extended rangeLCD for viewing inch/mm measurements and Statistical Process Control (SPC) data outputRatcheting thimble stop for constant measuring forceIngress Protection certified IP65 against dust and liquids such as coolantPublisher: MitutoyoDetails: The Mitutoyo 389-351 digital outside micrometer has a 0 to 1"/0 to 25.4mm measuring range with 0.00005"/0.001mm resolution and accuracy to 0.0002" for measuring thickness of material such as sheet metal, paper, and plastic. It has a 6" throat depth, LCD screen, and SPC data output. The 6" throat depth provides extended range for measuring the thickness of material such as sheet metal, paper, and plastic. The LCD and function buttons allow origin-set, zero-set, data hold, and inch/mm conversion, and the Statistical Process Control (SPC) data output allows connection to a computer with an optional SPC cable (sold separately). An alarm indicates low battery. Its ratcheting thimble stop provides a constant force for consistent measurements. The carbide-tipped measuring faces are flat to 0.000024"/0.6μm. It is supplied in a fitted plastic case. The digital outside micrometer has an Ingress Protection 65 (IP 65) rating level for protection against dust and liquids such as coolant, and is suitable for applications such as qual... shopify_US_849750523951 new 602.12 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41tfhLz9PBL_grande.jpg?v=1528151999 Mitutoyo Dimensional Measurement yes 603908312949 0.0 kg Mitutoyo 326-252-30 TMC-50MX Micrometer https://jumboindustrial.com/products/mitutoyo-326-252-30-tmc-50mx-micrometer Brand: MitutoyoFeatures: Interchangeable Anvil-SpindleWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 326-252-30 Tmc-50MX, Tmc-50MX.EAN: 4946368695778 shopify_US_849749999663 new 699.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/516nbonj8OL_grande.jpg?v=1528151999 Mitutoyo Dimensional Measurement yes 4946368695778 0.0 kg UL507 Articulated UL Test Finger accessibility probe PA100A for electrical safety test Safety standards Thorn Probe Test finger https://jumboindustrial.com/products/ul507-articulated-ul-test-finger-accessibility-probe-pa100a-for-electrical-safety-test-safety-standards-thorn-probe-test-finger Brand: GLTLPublisher: GLTLDetails: UL Test Bent Finger Probe/ Test Finger Probe; Test Finger Length: 234mm; The Bending Part Length: 30/30/40mm; 1, According to : UL507 (PA100A), UL1017 figure 2, figure 6.5 UL1062, UL982 figure 7.1 and figure 1.2 UL474 figure 5.1 and figure 14, UL60065 UL6500 figure 14, Figure 7.2 and figure 8.3 UL1278 UL1082; 2, UL Jointed test finger probe meets the standard requirements of UL60335,UL476,UL1026,UL5076,used for simulating fingers in the test. 3, It is mainly used for preventing the finger from approaching to the hazardous parts in the condition of exerting forces, 4, to ensure the products have enough safety protections when accidentally touching the live parts in the process of the normal use. 5, This is the "UL" test finger, researched and designed by UL and required by most UL Standards. 6, Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. 7, Bell-Core accessory available.The handle is made of nylon. The finger is made of stainless steel. 8, The finger part of UL jointed test finger probe cannot touch the live parts or the hazardous parts, 9, and 50mm-78mm dam-board cannot enter entirely. In partly of the preventing from approaching the hazardous parts test, 10, UL test finger probe should be exerted thrust.EAN: 6169957544709 shopify_US_849749147695 new 758.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31iJPi4NGSL_grande.jpg?v=1528152000 GLTL Dimensional Measurement yes 6169957544709 0.0 kg Mitutoyo 343-251-30 OMP-50MX Micrometer, Caliper, Outside, 25 mm-50 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-343-251-30-omp-50mx-micrometer-caliper-outside-25-mm-50-mm-0-001-mm Brand: MitutoyoFeatures: Caliper type jaws with carbide measuring facesWith ratchet stop for constant forceSPC outputPublisher: MitutoyoDetails: Mitutoyo 343-251-30 OMP-50MX, Micrometer, Caliper, Outside, 25-50 mm, 0.001 mm.EAN: 4946368689708 shopify_US_849748852783 new 690.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31kPC1rsAaL_grande.jpg?v=1528152001 Mitutoyo Dimensional Measurement yes 4946368689708 0.0 kg Mitutoyo 345-351-10 LCD Inside Micrometer, Caliper Type, 1-2"/25-50mm Range, 0.00005"" Graduation, +/-0.0003" Accuracy https://jumboindustrial.com/products/mitutoyo-345-351-10-lcd-inside-micrometer-caliper-type-1-2-25-50mm-range-0-00005-graduation-0-0003-accuracy Brand: MitutoyoFeatures: Caliper-type jaws for making inside dimension (ID) measurementsDigital, single-value readout LCD displays in inch and metric units for readabilityStatistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately)Satin chrome finish on thimble and sleeve helps resist rust and reduce glareHigh-grade tool steel construction for durabilityPublisher: MitutoyoDetails: The Mitutoyo 345 series LCD inside micrometer has caliper-type jaws for making inside dimension (ID) measurements, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. It also has a function lock and two presets. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated ... shopify_US_849748656175 new 683.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31fpnrnvDWL_grande.jpg?v=1528152001 Mitutoyo Dimensional Measurement yes 4946368580746 0.0 kg Mitutoyo 570-312CAL Absolute Digimatic Height Gauge with Calibration, Inch/Metric, 0-12" (0-300mm) Range, 0.0005" (0.01mm) Resolution, +/... https://jumboindustrial.com/products/mitutoyo-570-312cal-absolute-digimatic-height-gauge-with-calibration-inch-metric-0-12-0-300mm-range-0-0005-0-01mm-resolution-0-0015-accuracy Brand: MitutoyoFeatures: Calibrated height gauge measures 0 to 12.0" (0 to 300mm) with 0.0005" (0.01mm) resolution and + or - 0.0015" accuracy, for marking or measuring the height of objectsLCD screen displays 10mm characters in inches and metric unitsScriber is carbide-tipped for durability and column is rigid for accuracyHand-operated feed wheel for adjustmentsIncludes a Mitutoyo Certificate of Calibration that the tool has been calibrated, and meets the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratoriesPublisher: MitutoyoDetails: The calibrated Mitutoyo 570-312CAL Absolute Digimatic digital height gauge is for measuring or marking the height of objects. The gauge has a measurement range of 0 to 12.0" (0 to 300mm), resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.0015". The LCD screen displays 10mm high characters in inches and metric units. The scriber on this model is carbide-tipped for durability and the column is rigid for accuracy. The gauge has a hand-operated feed wheel for coarse adjustments. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the Interna... shopify_US_849748525103 new 721.74 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ll5bB45wL_grande.jpg?v=1528152002 Mitutoyo Dimensional Measurement yes 603908579069 0.0 kg QNix 4200 Coating Thickness Gauge w/ Integrated Fe 200 mil Probe by Automation Dr. Nix https://jumboindustrial.com/products/qnix-4200-coating-thickness-gauge-w-integrated-fe-200-mil-probe-by-automation-dr-nix Brand: Automation Dr. NixPublisher: Automation Dr. NixDetails: Quanix Coating Thickness Gage Meter -QNix 4200 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the Paint Thickness Meter / Gauge -QNix 4200 precise measurements on steel, iron become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 200 mils. The sensitive measuring probe of the extremely small, light and handy Paint Thickness Meter / Gauge QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. The sensitive measuring probe of the extremely small, light and handy QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor and Eddy Current technology. Integrated measuring probe without cables or plugs. Broad spectrum of use: Dual probe for m... shopify_US_849748492335 new 685.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Y9gLRyOGL_grande.jpg?v=1528152002 Automation Dr. Nix Dimensional Measurement yes 7434000044055 0.0 kg Mitutoyo 422-330-30 BLM-1"MX Blade Micrometer, Type A, 0"-1", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-422-330-30-blm-1mx-blade-micrometer-type-a-0-1-0-00005-0-001-mm Brand: MitutoyoFeatures: The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard to reach areasSpeedy spindle feed of .4 In/10mm/revWith Ratchet Stop for constant measuring forceNon-rotating spindle eliminates torque on work piecePublisher: MitutoyoDetails: Mitutoyo 422-330-30 BLM-1"MX, Micrometer, Blade, Type A, 0-1",.00005"/0.001 mm.EAN: 4946368689890 shopify_US_849748361263 new 660.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31TSDgyqtvL_grande.jpg?v=1528152002 Mitutoyo Dimensional Measurement yes 4946368689890 0.0 kg Mitutoyo 329-351-30 DMC4-12"MX Depth Micrometer, Interchangeable Rod, 0"-12", 0.0001"/0.001 mm https://jumboindustrial.com/products/mitutoyo-329-351-30-dmc4-12mx-depth-micrometer-interchangeable-rod-0-12-0-0001-0-001-mm Brand: MitutoyoFeatures: Provides a wide measuring rangeThe rod length can be adjusted in 1 In or 25mm incrementsSPC data outputPublisher: MitutoyoDetails: Mitutoyo 329-351-30 Dmc4-12"MX, Micrometer, Depth, Interchangeable Rod, 0-12",.0001"/0.001 mm.EAN: 4946368695877 shopify_US_849748295727 new 697.28 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51NSzMpNzjL_grande.jpg?v=1528152002 Mitutoyo Dimensional Measurement yes 4946368695877 0.0 kg Mitutoyo 209-916 Dial Outside Caliper, 6.6" Throat Depth, 0 to 2" Range, 0.001" Graduations, Inch https://jumboindustrial.com/products/mitutoyo-209-916-dial-outside-caliper-6-6-throat-depth-0-to-2-range-0-001-graduations-inch Brand: MitutoyoFeatures: Measures 0 to 2" with 0.001" graduations and 0.002" accuracy for precise measurements6.6" throat depth for extended range in measuring groove thickness, tube thickness, and hard-to-reach dimensions0.12" diameter ball-type contact with 0.8 to 1.7N measuring forceTwo adjustable dial markers to record measurementsCertified to IP 67 level of protection against dust and liquidsPublisher: Mitutoyo America CorporationDetails: The Mitutoyo 209-916 dial outside caliper has a 6.6" throat depth, a 0 to 2" measuring range with 0.001" graduations, and accuracy to 0.002" for measuring groove thickness, tube thickness, and hard-to-reach dimensions. The 6.6" throat depth provides extended range for measuring groove thickness, tube thickness, and hard-to-reach dimensions. It has a 0.12" diameter ball-type contact with a 0.8 to 1.7N measuring force. Two adjustable dial markers record measurements. The dial outside caliper is Ingress Protection certified IP67 for protection against dust and liquids, and is suitable for applications such as quality control for machined parts.SpecificationsMeasurement range0 to 2"Increments0.001"Accuracy+ or - 0.002"Throat depth6.6"Ball-type contact diameter0.12"Measuring force0.8 to 1.7NProtection levelIP67Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outsi... shopify_US_849748099119 new 709.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41fYYhmGYFL_grande.jpg?v=1528152003 Mitutoyo Dimensional Measurement yes 603908577058 0.0 kg Harpenden Skinfold Caliper Model C-136 by HARPENDEN https://jumboindustrial.com/products/harpenden-skinfold-caliper-model-c-136-by-harpenden Brand: HarpendenDetails: The Harpenden Skinfold Caliper is a precision instrument designed for use in the performance of Skinfold thickness measurements (from which estimates of body fat are derived). The use of this instrument has been well established and documented over the past 40 years. Designed in 1958 in collaboration with D. J. M. Tanner, a prominent force in the use of Skinfold measurements in the derivation of body fat measurement. The Harpenden Skinfold Caliper has been used all over the world on projects of international importance and is the most prestigious Caliper available. It is the only Caliper CE marked under the Medical Devices Directive 93/42/EEC for a Class 1 Device with Measuring Function and is calibrated using masters traceable to National Standards.Professional Skinfold Caliper;Handbook IncludedUPC: 785571821796EAN: 0785571821796 shopify_US_849747902511 new 687.81 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41H1rPiaHML_grande.jpg?v=1528152003 Harpenden Dimensional Measurement yes 785571821796 0.0 kg VETUS INSTRUMENTS Leeb242 Portable Coating Thickness Gauge with Printer Magnetic Induction and Eddy Current Principle Coating Thickness M... https://jumboindustrial.com/products/vetus-instruments-leeb242-portable-coating-thickness-gauge-with-printer-magnetic-induction-and-eddy-current-principle-coating-thickness-measuring-tools-equip-with-2-probes Brand: VETUS INSTRUMENTSFeatures: Measuring range (µm): 0~1250μm*Accuracy: ±[(1~3%)H+1]Low range resolution (µm): 0.1μmOperating temperature: 0℃~40℃; Dampness, 20%~90%Operating principle: Magnetic induction or Eddy currentPublisher: VETUS INSTRUMENTSDetails: Application Fields: * Coating thickness gauge is mainly used for measuring hull, oil and gas pipeline, high pressure vessel and boiler wall thickness as well as a variety of plate thickness, can be measured material is a delegate with steel metal materials, can be plastic, nylon and other non-metallic materials. Measuring Material: * Two methods of magnetic and eddy current measurement, nondestructive testing Non magnetic coatings on magnetic substrates (such as aluminum, chromium, copper, zinc, tin, rubber, paint on the steel, iron, alloy and magnetic steel) or non conductive coating on non magnetic metal (such as rubber, plastic, paint, oxide on aluminum, copper, zinc, tin) Technical Specifications *Model: leeb242 *Operating principle: Magnetic induction or Eddy current *Measuring range (µm): 0~1250μm *Accuracy: ±[(1~3%)H+1] *Low range resolution (µm): 0.1μm *Min curvature of the min area (mm): Convex1.5; Concave9 *Diameter of the min area (mm): Φ7 *Critical thickness of substrate (mm): 0.5 *Operating temperature: 0℃~40℃; Dampness, 20%~90% *Magnetic field: No strong magnetic field environment *Dimensions: 230×86×46mm *Power supply: 6V rechargeable NI-MH battery *Standard configuration : Main unit,probesUPC: 64... shopify_US_849747476527 new 689.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41mQn1Ao-UL_grande.jpg?v=1528152004 VETUS INSTRUMENTS Dimensional Measurement yes 647904233242 0.0 kg Mitutoyo 209-304 Caliper Gauge, Pointed Jaw, White Face, 30-50mm Range, +/-0.03mm Accuracy, 0.01mm Resolution, Meets IP65 Specifications https://jumboindustrial.com/products/mitutoyo-209-304-caliper-gauge-pointed-jaw-white-face-30-50mm-range-0-03mm-accuracy-0-01mm-resolution-meets-ip65-specifications Brand: MitutoyoColor: WhiteFeatures: Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thicknessSpring-loaded for point contact at constant measuring pressureDial display provides precise, readable measurements in metric unitsLarge measuring depth for hard-to-reach internal dimensionsRated IP65 for resistance to penetration by dust, and to liquid up to the force of a low-pressure water jetPublisher: MitutoyoDetails: The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposin... shopify_US_849746755631 new 690.91 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_2cb65a47-7e14-4555-9028-50bddf7db3fc_grande.jpg?v=1528152005 Mitutoyo Dimensional Measurement yes 603908548669 0.0 kg Mitutoyo 209-455 Caliper Gauge, Pointed Jaw, White Face, 0-0.80" Range, +/-0.0015" Accuracy, 0.0005" Resolution, Meets IP65 Specifications https://jumboindustrial.com/products/mitutoyo-209-455-caliper-gauge-pointed-jaw-white-face-0-0-80-range-0-0015-accuracy-0-0005-resolution-meets-ip65-specifications Brand: MitutoyoColor: WhiteFeatures: Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thicknessSpring-loaded for point contact at constant measuring pressureDial display provides precise, readable measurements in metric unitsLarge measuring depth for hard-to-reach internal dimensionsRated IP65 for resistance to penetration by dust, and to liquid up to the force of a low-pressure water jetPublisher: MitutoyoDetails: The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposin... shopify_US_849746526255 new 690.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_6ce2dfd2-e4b0-429c-8b26-ee2303f793d1_grande.jpg?v=1528152006 Mitutoyo Dimensional Measurement yes 603908540243 0.0 kg Starrett 665JZ Inspection Set With 25-131J Inch Reading AGD Group 2 Dial Indicator, With Case https://jumboindustrial.com/products/starrett-665jz-inspection-set-with-25-131j-inch-reading-agd-group-2-dial-indicator-with-case Brand: StarrettFeatures: Versatile dial indicator holderExtremely stable baseUse radiused stop guide to check parts or surfaces from straight to angularUse in hard to reach places for inspecting jigs, fixturesUse in set ups for lathe and other machinesPublisher: StarrettDetails: The set includes base, upright base post (0.464" x 8") with clamp mechanism, gage holding rod (3/8" x 9-1/2") with clamp mechanism, swivel post snug with (0.465" and 3/8") holes with no. 665L reducing bushing, clamp with (0.464" x 5-3/4") post, clamp with (1/4", 5/16", 3/8" diameter) post, tool post holder approximately 1" x 7/16", offset arm (3/8" diameter) (3" and 5 1/2") arms, reducing bushing only for swivel post snug (0.465") outside diameter, 0.375" inside diameter and No. 25-131J inch reading dial indicator.UPC: 049659562750EAN: 0049659562750 shopify_US_849746329647 new 729.27 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41dLd6VluQL_grande.jpg?v=1528152006 Starrett Dimensional Measurement yes 049659562750 0.0 kg Starrett 685M-1Z Millimeter Reading External Chamfer Gauge With Yellow Dial, 0-90 Degree Angle, 3.2-12.7mm Range https://jumboindustrial.com/products/starrett-685m-1z-millimeter-reading-external-chamfer-gauge-with-yellow-dial-0-90-degree-angle-3-2-12-7mm-range Brand: StarrettFeatures: All ground surfaces are of hardened tool steelIndicators are AGD designExternal gauges will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gaugeGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.UPC: 049659649970EAN: 0049659649970 shopify_US_849745870895 new 671.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41aqtoAHx3L_grande.jpg?v=1528152008 Starrett Dimensional Measurement yes 049659649970 0.0 kg Leica Disto E7500i Laser Distance Meter With GLB30 Glasses and TRI100 Tripod https://jumboindustrial.com/products/leica-disto-e7500i-laser-distance-meter-with-glb30-glasses-tri100-tripod Brand: LeicaFeatures: Laser Range: Up to 660 FeetImage Magnifications: 4xTilt Sensor Measuring Range: 360 DegreesMemory Storage Capacity: Previous 30 MeasurementsBluetooth Smart CapabilityPublisher: Leica GeosystemsDetails: Leica's DISTO E7500i is an all-purpose laser distance meter with a robust set of features and functions that makes it useful in many different situations. Its oversized receiver lens allows the DISTO to see a laser dot up to 660 feet away. That's well beyond the range a human could detect the dot with the naked eye. Additionally, the device's measurements are accurate to 1/16th of an inch so you can be confident you're always getting the most accurate readings possible. The DISTO also has a 360 degree tilt sensor that determines the angle of the laser. This allows the meter to calculate slope height and the distance to an object even when you're shooting over an intervening obstacle. The DISTO has built-in Bluetooth Smart technology, too. This means you can pair the meter with a smartphone or tablet and send distance information to a variety of Leica apps that are available. These apps can aid in everything from taking flooring measurements to generating floor plans. Bundle Includes: • Leica Disto E7500i Laser Distance Meter (Red/Black) • Leica GLB30 Laser Glasses • Leica TRI100 Tripod with Tilting HeadUPC: 646791345403EAN: 0646791345403 shopify_US_849745674287 new 634.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51z_2BuWcaR6L_grande.jpg?v=1528152008 Leica Dimensional Measurement yes 646791345403 0.0 kg South ET-02 2" Electric Theodolite https://jumboindustrial.com/products/south-et-02-2-electric-theodolite Brand: South EnterprisesColor: YellowFeatures: 2" Angular AccuracyReading system: Absolute EncodingAuto-vertical compensator: Liquid- electric detectionSpecific large 2-side LCD screen for clear reading in all conditionsDetection method: Horizontal angle: dual Vertical angle: dualPublisher: South Surveying andamp; Mapping InstrumentDetails: The South ET series Theodolites have Smart appearance, reasonable structure, practical functions. They are easy-to-use, and with excellent performance and reliable quality. (Includes: theodolite, tribrach, NiH rechargeable battery, Charger, user manual, and one year manufacturer warranty) SPECIFICATION Model: ET-02 Telescope: • Magnification: 30X • Objective Lens: 45mm • Overall Length: 157mm • Stadia Ration: 100 • Stadia Constant: 0 • Image: Erect • Field of View: 1° 30" • Minimum Focus: 1.4m • Resolving Power: 3.0' Electronic Angle Measurement: • Reading System Photoelectric detection by incremental encoder • Diameter of Circle (VHz): 79mm • Minimum Reading: 1"/5" (Selectable) • Accuracy: 2" • Horizontal Angle: Dual • Vertical Angle: Dual Display: • (LCD) Display Type: 2 sides, segment LCD in two lines Level Sensitivity: • Plate Level: 30"/2mm (30" per 2mm) • Circular Level: 8'/2mm (8" per 2mm) Auto Vertical Compensator: • System: Liquid-electric detection/plate level selectable • Working range: +3' • Accuracy: 1" (Liquid-electric detection) 30""/2mm (plate level) Optical Plummet Telescope: • Image: ... shopify_US_849744658479 new 1,378.25 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ZSADVp-IL_39644ef3-074d-4e6d-bb8a-56a521a6985e_grande.jpg?v=1528152009 South Enterprises Dimensional Measurement yes 852688004005 0.0 kg Mitutoyo 543-557A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, M2.5X0.45 Thread, 8mm Stem Dia., 0-50mm Range, 0.001mm Gradua... https://jumboindustrial.com/products/mitutoyo-543-557a-absolute-lcd-digimatic-indicator-id-f-with-back-lit-lcd-m2-5x0-45-thread-8mm-stem-dia-0-50mm-range-0-001mm-graduation-0-003mm-accuracy Brand: MitutoyoFeatures: Metric LCD display has two user-selectable resolutions (0.001 or 0.01 mm), an accuracy of + or - 0.003 mm, and a total measurement range of 0 - 50.8 mmSealed housing meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, has an 8-mm diameter stem, a carbide ball contact point, and a flat backHas maximum/minimum value hold, the difference between high and low values, alerts when user-defined tolerances are exceeded, and can be set to zero at any spindle position for measuring in either or both directionsBackup memory retains setup conditions, and alarm indicates overflow error, tolerance limit setting error, and scale contaminationSPC data output, and choice of two power sources (AC or 9V battery)Publisher: MitutoyoDetails: Mitutoyo 543-557A LCD Absolute Digimatic ID-F150H Indicator has resolutions of 0.001 and 0.01 mm, an accuracy of + or - 0.003 mm, a total measurement range of 0-50.8 mm, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The LCD display has a sealed housing that meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, an 8-mm diameter stem, a carbide ball contact point, and a flat back. The indicator displays maximum and minimum read hold, changes color from green to red when user-defined tolerances are exceeded, and has total indicator reading (TIR) capability that displays the absolute difference between the high... shopify_US_849744330799 new 796.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41dQkpdRb3L_grande.jpg?v=1528152010 Mitutoyo Dimensional Measurement yes 4946368121307 0.0 kg Mitutoyo 332-151 Optoeye-200 https://jumboindustrial.com/products/mitutoyo-332-151-optoeye-200 Brand: MitutoyoFeatures: Edge detection system for QM-Data 200Use with Profile ProjectorsOptional detector attachments (A) 12AAE671, (B) 12AAE672Publisher: MitutoyoDetails: Optoeye Edge detection system for QM-Data 200.UPC: 603908370123EAN: 0603908370123 shopify_US_849744232495 new 1,650.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/411fS7vWgHL_grande.jpg?v=1528152010 Mitutoyo Dimensional Measurement yes 603908370123 0.0 kg Starrett C359BZ Precision Universal Bevel Vernier Protractor, Through 360 Degree Graduations, 7" Blade Size https://jumboindustrial.com/products/starrett-c359bz-precision-universal-bevel-vernier-protractor-through-360-degree-graduations-7-blade-size Brand: StarrettFeatures: Satin chrome finish on all reading surfacesSharp, machine-divided graduations that read to 5 minutes (1/12 of a degree)Blades can be rotated and length adjusted, as required; flush surfaces on the base permits use on height gaugesDial and blade can be locked independentlyMachine-divided graduations read to 5 minutes (1/12 of a degree) and accuracy is finer than can be read; the most convenient, ultra-sensitive fine adjustment for precision settingPublisher: StarrettRelease Date: 2017-05-15Details: Starrett Universal Bevel Protractors with Vernier can be accurately read to 5 minutes (5') or 1/12 of a degree. The dial of the protractor is graduated both to the right and left of zero up to 90 degrees. The Vernier scale is also graduated to the right and left of zero up to 60 minutes (60'), each of the 12 Vernier graduations representing 5 minutes. Any angle can be measured, and remember that the Vernier reading must be read in the same direction from zero as the protractor, either left or right.UPC: 049659513943EAN: 0049659513943 shopify_US_849744101423 new 661.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51euj5OGsbL_grande.jpg?v=1528152011 Starrett Dimensional Measurement yes 049659513943 0.0 kg Spectra Precision Laser LL300-4 Automatic Self-leveling Level w/HR350 Receiver, NiCad Rechargeable Batteries https://jumboindustrial.com/products/spectra-precision-laser-ll300-4-automatic-self-leveling-level-w-hr350-receiver-nicad-rechargeable-batteries Brand: Spectra Precision LasersFeatures: Basic LL300-4 package includes HR300 Receiver, clamp, 4 NiCad "D" batteries, charger, and carrying case.Meets IP54 Water and Dust Resistant standards635-670 nm Laser Source, Class 2Laser Accuracy of + or - 3/32" @ 100 ft. 1000 ft (diameter) range.Fully automatic electronic Self-leveling( with HI Alert) for fast andamp; accurate setupsClass 2 Laser and shopify_US_849743970351 new 809.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51a_2BI9hLMrL_1ff98d39-9e47-4993-8204-d88f9f4c3ff0_grande.jpg?v=1528152011 Dimensional Measurement no 0.0 kg Laser Digital Theodolite 5 Seconds Accuracy With Dual Keyboard IP55 Rating https://jumboindustrial.com/products/laser-digital-theodolite-5-seconds-accuracy-with-dual-keyboard-ip55-rating Brand: Survey ProFeatures: Laser IndicatorAccuracy: 5″Water and Dust Proof: IP 55Dual LCD DisplayOperating time: 10hoursPublisher: Omni Optical ProductsDetails: This theodolite features a rugged body design that is able to withstand harsh environments. Its operating time of 10 hours insures you have the battery you need to get the job done.UPC: 041967299366EAN: 0041967299366 shopify_US_849743708207 new 594.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41pfXIg7QEL_d1d0e3df-e487-404a-9566-e04de42da62d_grande.jpg?v=1528152011 Survey Pro Dimensional Measurement yes 041967299366 0.0 kg CRACKMON 224R Crack-Width Comparator Gauge | ACI 224R-01 Compliant (50-Pack) https://jumboindustrial.com/products/crackmon-224r-crack-width-comparator-gauge-aci-224r-01-compliant-50-pack Brand: BuilderaColor: ClearFeatures: Bulk 50-pack pocket-sized crack-width gauge for retail distribution or high-volume end usersConforms to ACI 224R-01 crack-width limits for reinforced concreteMade from tough, flexible modified polyethylene and UV-cured inkIncludes inch and metric rules for cracks up to 2.5" or 50 mmEngineered and made in the USA of premium materials with individual serial numbersPublisher: BUILDERADetails: Important Information The Buildera CRACKMON® 224R-50 is bulk-packaged in 50 pieces with a center hang-hole ideal for retail and point-of-sale displays, or use as company or customer goodwill. The reverse side includes the 12-digit barcode: UPC 816291010112 which is for a single retail unit. The Buildera CRACKMON® 224R Crack-Width Comparator is ideal for estimating and documenting cracks in new and existing concrete and masonry structures. It slips easily into your wallet or shirt pocket and is excellent for measuring initial crack offsets prior to long-term monitoring using Buildera CRACKMON Crack Monitors. Ideal for building contractors, concrete forensics, inspectors, transportation, utilities, property owners and professionals in the fields of civil, geo-technical and structural engineering. The card includes both 2.5" and 50mm metric rules, as well as 18 predefined crack widths for easy spot-checking, including the key widths set forth by the American Concrete Institute ACI 224R-01 recommended practice. The gauge is made from recyclable polye... shopify_US_849743642671 new 795.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/61Nr8i-niFL_grande.jpg?v=1528152012 Buildera Dimensional Measurement yes 816291010167 0.0 kg E-RA15B https://jumboindustrial.com/products/e-ra15b Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126962067 shopify_US_849743478831 new 1,283.58 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21r16D223JL_grande.jpg?v=1528152012 KANON (Nakamura MFG) Dimensional Measurement yes 4582126962067 0.0 kg STABILA 35712-KIT 7'-12' Plate Level 2 - Type 106T with Case https://jumboindustrial.com/products/stabila-35712-kit-7-12-plate-level-2-type-106t-with-case Brand: StabilaPublisher: STABILADetails: STABILA 35712-KIT 7'-12' Plate Level 2 - Type 106T with CaseUPC: 656729969397EAN: 0656729969397 shopify_US_849743413295 new 415.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51LnPFfuA7L_grande.jpg?v=1528152012 Stabila Dimensional Measurement yes 656729969397 0.0 kg Mitutoyo 172-234 V-Block https://jumboindustrial.com/products/mitutoyo-172-234-v-block Brand: MitutoyoFeatures: Workpiece fixture for profile Projectors and measuring MicroscopesMax. Workpiece diam 50mmWidth of block 60mmPublisher: MitutoyoDetails: V-blockUPC: 603908051916EAN: 0603908051916 shopify_US_849743249455 new 663.09 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21AD4e070vL_grande.jpg?v=1528152013 Mitutoyo Dimensional Measurement yes 603908051916 0.0 kg FenderSplendor FS488 Paint Meter / Gauge. Buy 2 pak and Save $20... 15,000 Meters Sold , Sold and Warrantied in the USA with 2 Year Excha... https://jumboindustrial.com/products/fendersplendor-fs488-paint-meter-gauge-buy-2-pak-save-20-15-000-meters-sold-sold-and-warrantied-in-the-usa-with-2-year-exchange-warranty-avoid-3000-losses-when-you-miss-paintwork Brand: FenderSplendorColor: RedFeatures: Eliminate $2,000 Mistakes. Auto Reads Steel and Aluminum. No on or off switch. Instant OnWarranty work done in the USA and normally returned within 1 business day.Now GET FREE SHIPPING to USA and Canada .. 90 Days Full Money Back Refund.15,000 Car Dealers have trusted FenderSplendor for over 12 yearsFast and friendly USA based tech support. Fast Warranty work done in the USAPublisher: FendersplendorDetails: "Over 15,000 Car Dealers and Auto Auctions use FenderSplendor Paint Meters. Be sure you are buying the #1 Paint Meter for Automobile Dealers when you buy. Sold and Serviced in the USA. The only true 3 year replacement warranty with 24 hour replacements shipped directly from our USA office. Fully automatic, with no hidden buttons or calibration required. Reads Steel and Aluminum automatically...no need to switch Large, Ice Blue Lighted Display, easy to read at night and in bad weather. Rock Solid 90 Day Money Back Guarantee. Reads both Steel and Aluminum Automatically No Calibration needed. Automatic Power On and Off Large Lighted "Ice Blue" Backlighted Display Sold and Warrantied in the USA 2 Year Replacement Warranty with the FS 688 Paint Meter 90 Day Money Back Guarantee. Fastest and easiest Warranty available. If you any problems with your meter you can contact us and within 24 hours of your returned gauge we will replace your problem meter with a new meter. UPC: 633841572810EAN: 0633841572810 shopify_US_849743118383 new 698.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51juWsFh_2BBL_grande.jpg?v=1528152013 FenderSplendor Dimensional Measurement yes 633841572810 0.0 kg Mitutoyo 209-571 Digital Caliper, Battery Powered, Inch/Metric, Pointed Jaw, 0-0.39" Range, +/-0.0004" Accuracy, 0.0002" Resolution, Meet... https://jumboindustrial.com/products/mitutoyo-209-571-digital-caliper-battery-powered-inch-metric-pointed-jaw-0-0-39-range-0-0004-accuracy-0-0002-resolution-meets-ip63-ip67-specifications Brand: MitutoyoFeatures: Outside dimension (OD) measurement capability for measuring hole diameters and groove and tube thicknessLarge measuring depth for hard-to-reach external dimensionsCombination analog/digital LCD readout displays in inches or metric units for viewing easeStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerRated IP67 for resistance to penetration by dust and submersion in liquidPublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 209 series Digimatic caliper gauges have a combination analog/digital LCD display and large measuring depth for taking outside dimension (OD) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach outside dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring external wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately) for statistical process control (SPC). The unit comes with, and is powered by, a single AA battery that lasts approxim... shopify_US_849742921775 new 736.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31qgci-aBDL_f12aa146-eb3f-46a7-8a75-8505c1cd546b_grande.jpg?v=1528152013 Mitutoyo Dimensional Measurement yes 603908544517 0.0 kg MITUTOYO Metric Digimatic Quick Thickness Gauge 547-400S https://jumboindustrial.com/products/mitutoyo-metric-digimatic-quick-thickness-gauge-547-400s Brand: MitutoyoFeatures: Imperial/Metric conversionZero/ABSMax measuring Depth: 30mmMax measuring Depth: 30mm Resolution: 0.01mm/.0005"Publisher: MITUTOYODetails: The 547-400S allows simple, quick and accurate thickness measurement and the measuring faces are hardened, ground and lapped. This thickness gauge features a large LCD display as well as a thumb level to lift the spindle.EAN: 4946368124353 shopify_US_849741774895 new 966.20 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31CqKndWZIL_grande.jpg?v=1528152014 Mitutoyo Dimensional Measurement yes 4946368124353 0.0 kg 220g 0.0001g Analytical balance JJ224BC High-Precision Digital Balance Scale For Laboratory Pharmacy 220g/0.1mg 110v/220v https://jumboindustrial.com/products/220g-0-0001g-analytical-balance-jj224bc-high-precision-digital-balance-scale-for-laboratory-pharmacy-220g-0-1mg-110v-220v Brand: Hanchen Instrument®Features: Tare function and Automatic calibrationseven unit conversion and counting functionLCD digital display and 232 port data outputThe all-aluminum shell and Electromagnetic balancing type sensorRange 0-220g and Precision 0.1mg /110V OR 220VPublisher: Hanchen InstrumentDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description This kind of high-precision digital balance scale is very suitable for the laboratory and pharmacy. Features : Tare function Automatic calibration seven unit conversion counting function LCD digital display 232 port data output The all-aluminum shell Electromagnetic balancing type sensor data port connection with computer Temperature compensation function Technical Datas Capacity size : 0~220g Power supply voltage:220V/110V 50Hz/60Hz Resolution :0.1mg Pan size : Φ80mm Operating temperature :20±2℃ Operating Humidity :45~60%RH Net Weight :about 7 kg. NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us EAN: 8709759873768 shopify_US_849741611055 new 559.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41hVZT9biEL_grande.jpg?v=1528152015 Hanchen Instrument® Dimensional Measurement yes 8709759873768 0.0 kg Starrett 687M-1Z Millimeter Reading Countersink Gauge With Yellow Dial, 82 Degree Angle, 0.5-4.3mm Range https://jumboindustrial.com/products/starrett-687m-1z-millimeter-reading-countersink-gauge-with-yellow-dial-82-degree-angle-0-5-4-3mm-range Brand: StarrettFeatures: All ground surfaces are of hardened toolIndicators are AGD designGauges furnished in deluxe padded casePublisher: StarrettRelease Date: 2017-05-15Details: Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.UPC: 049659650037EAN: 0049659650037 shopify_US_849741447215 new 677.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/511xIXfbUmL_grande.jpg?v=1528152015 Starrett Dimensional Measurement yes 049659650037 0.0 kg Mitutoyo 314-262-30 VM3-1"PMX V-Anvil Micrometer, 3 Flute, 10 mm-25 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-314-262-30-vm3-1pmx-v-anvil-micrometer-3-flute-10-mm-25-mm-0-001-mm Brand: MitutoyoFeatures: Measures the outside diameter of cutting tools with an odd number of flutesWith ratchet stop for constant forceWith SPC outputPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 314-262-30 VM3-1"PMX, Micrometer, V-Anvil, 3-Flute, 10-25 mm, 0.001 mm.EAN: 4946368695624 shopify_US_849740431407 new 723.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Xwyt2u1GL_grande.jpg?v=1528152017 Mitutoyo Dimensional Measurement yes 4946368695624 0.0 kg Mitutoyo 314-352-30 VM3-1"MX V-Anvil Micrometer with Relief, 3 Flute, 0.4"-1", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-314-352-30-vm3-1mx-v-anvil-micrometer-with-relief-3-flute-0-4-1-0-00005-0-001-mm Brand: MitutoyoFeatures: Measures the outside diameter of cutting tools with an odd number of flutesWith ratchet stop for constant forceWith SPC outputPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 314-352-30 VM3-1"MX, Micrometer, V-Anvil, With Relief, 3-Flute,.4-1",.00005"/0.001 mm.EAN: 4946368695648 shopify_US_849740038191 new 702.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51n5xa99C9L_grande.jpg?v=1528152017 Mitutoyo Dimensional Measurement yes 4946368695648 0.0 kg Mitutoyo 543-552ACAL Absolute LCD Digimatic Indicator with Calibration, ID-F-Type with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., ... https://jumboindustrial.com/products/mitutoyo-543-552acal-absolute-lcd-digimatic-indicator-with-calibration-id-f-type-with-back-lit-lcd-4-48-unf-thread-0-375-stem-dia-0-1-0-25-4mm-range-selectable-resolution-0-00012-accuracy Brand: MitutoyoFeatures: Calibrated electronic indicator measures 0 to 1.0" (0 to 25.4mm) with selectable resolution and + or - 0.00012" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applicationsBacklit LCD readout displays measurements in inches or metric unitsReadout displays go/no-go (green/red) when upper and/or lower tolerance has been set and an analog bar indicator shows lower/upper limit- and zero-approaching for readabilityStem is 0.375" in diameter with a #4-48 UNF contact point thread mountIncludes a Mitutoyo Certificate of Calibration that the tool has been calibrated, and meets the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratoriesPublisher: MitutoyoRelease Date: 2017-05-15Details: The calibrated Mitutoyo 543-552ACAL Absolute Digimatic digital indicator gauge, ID-F series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 1.0" (0 to 25.4mm), a selectable resolution of 0.00005/0.0001/0.0005/0.001", or 0.001/0.01mm, and an accuracy of + or - 0.00012". The LCD readout is backlit and displays measurements in inches or metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set. It has an analog bar indicator that ... shopify_US_849738956847 new 748.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31PwhJqT6sL_grande.jpg?v=1528152020 Mitutoyo Dimensional Measurement yes 603908578901 0.0 kg 20X Speed Line Transit Levels 10380 20X Transit-Leveloutfit W/Tripod and: 114-54-200K - 10380 20x transit-leveloutfit w/tripod and https://jumboindustrial.com/products/20x-speed-line-transit-levels-10380-20x-transit-leveloutfit-w-tripod-114-54-200k-10380-20x-transit-leveloutfit-w-tripod Brand: CST/BergerFeatures: Features rough angle turning and fine tuning adjustments with 5/8in11 threaded universal base, 15 minute horizontal circle, 1 degree vertical arc, two 1112 minute plate vials for accuracyThe leveling base has 3 leveling screws, telescope turns sideways, you can plumb walls, set slopes, true forms and align poles and fence postsUnit has clamps and tangents to bring instrument quickly on targetPublisher: CST/bergerDetails: 114-54-200K Features: -4 1/2 ft (1.4m) short focus for maximum usable range. -Built-in sunshade with protected eyepiece. -Large coated achromatic lens-with fixed cross hairs. -Rubber eyepiece cap. Product Type: -Levels. Dimensions: Overall Product Weight: -25 Pounds.UPC: 644425540453EAN: 0644425540453 shopify_US_849738825775 new 399.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41T9qcDXwUL_grande.jpg?v=1528152021 CST/Berger Dimensional Measurement yes 644425540453 0.0 kg Mitutoyo 209-906 Digital Caliper Gage, 1.38-2.95", 0.001", 132 mm Depth with Internal Tube Thickness Measurement https://jumboindustrial.com/products/mitutoyo-209-906-digital-caliper-gage-1-38-2-95-0-001-132-mm-depth-with-internal-tube-thickness-measurement Brand: MitutoyoFeatures: Versatile ID measurement for holes, diameters, groove thickness, tube thickness and hard to reach dimensionsProvides error-free LCD readingsPublisher: Mitutoyo America CorporationDetails: Mitutoyo Digital Caliper Gage 209-906, Internal Tube Thickness Measurement Type, 1.38-2.95In, .001In, 132mm Depth.UPC: 603908582144EAN: 0603908582144 shopify_US_849736925231 new 736.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41pIexzpvEL_grande.jpg?v=1528152024 Mitutoyo Dimensional Measurement yes 603908582144 0.0 kg Mitutoyo 209-904 Digital Caliper Gage, 0.60-2.17", 0 .001", 127 mm Depth with Internal Measurement https://jumboindustrial.com/products/mitutoyo-209-904-digital-caliper-gage-0-60-2-17-0-001-127-mm-depth-with-internal-measurement Brand: MitutoyoFeatures: Versatile ID measurement for holes, diameters, groove thickness, tube thickness and hard to reach dimensionsProvides error-free LCD readingsPublisher: Mitutoyo America CorporationRelease Date: 2017-03-12Details: Mitutoyo Digital Caliper Gage 209-904, Internal Measurement Type, .60-2.17In, .001In, 127mm Depth.UPC: 603908577119EAN: 0603908577119 shopify_US_849736892463 new 736.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31vsGGon5HL_grande.jpg?v=1528152024 Mitutoyo Dimensional Measurement yes 603908577119 0.0 kg Mitutoyo 209-914 Digimatic Caliper Gages https://jumboindustrial.com/products/mitutoyo-209-914-digimatic-caliper-gages Brand: MitutoyoFeatures: Versatile OD measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensionsProvides error-free LCD readingsProvides data output for SPC analysisPublisher: MitutoyoDetails: Digimatic Caliper Gage - External Tube Thickness Measurement Type 0-30 mm, 116 mm Depth.UPC: 603908577089EAN: 0603908577089 shopify_US_849736466479 new 736.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/317220QwHZL_grande.jpg?v=1528152025 Mitutoyo Dimensional Measurement yes 603908577089 0.0 kg Mitutoyo 209-913 Digimatic Caliper Gages https://jumboindustrial.com/products/mitutoyo-209-913-digimatic-caliper-gages-1 Brand: MitutoyoFeatures: Versatile OD measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensionsProvides error-free LCD readingsProvides data output for SPC analysisPublisher: MitutoyoDetails: Digimatic Caliper Gage - External Tube Thickness Measurement Type 0-1.18”.UPC: 603908577065EAN: 0603908577065 shopify_US_849736368175 new 736.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41cK5u71GXL_grande.jpg?v=1528152025 Mitutoyo Dimensional Measurement yes 603908577065 0.0 kg Mitutoyo 326-353-30 TMC-3"MX Micrometer https://jumboindustrial.com/products/mitutoyo-326-353-30-tmc-3mx-micrometer Brand: MitutoyoFeatures: Interchangeable Anvil-SpindleWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 326-353-30 Tmc-3"MX, Tmc-3"MX.EAN: 4946368695822 shopify_US_849736335407 new 775.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51hn6tL9pGL_grande.jpg?v=1528152025 Mitutoyo Dimensional Measurement yes 4946368695822 0.0 kg Starrett 120AM-150 Dial Caliper, Stainless Steel, Yellow Face, 0-150mm Range, +/-0.03mm Accuracy, 0.02mm Resolution by Starrett https://jumboindustrial.com/products/starrett-120am-150-dial-caliper-stainless-steel-yellow-face-0-150mm-range-0-03mm-accuracy-0-02mm-resolution-by-starrett Brand: starrettPublisher: StarrettEAN: 5915903797740 shopify_US_849735876655 new 414.00 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31n6O4iMTNL_grande.jpg?v=1528152027 starrett Dimensional Measurement yes 5915903797740 0.0 kg INSIZE 4634-48 NPT Thread Ring Gage, 4" x 8 NPT https://jumboindustrial.com/products/insize-4634-48-npt-thread-ring-gage-4-x-8-npt Brand: INSIZEFeatures: American tapered pipe thread for threads with sealantStandard anise / same B1.20.1.Taper 1:16Arterial: ohms (oil hardened non-shrinking steel)Stable dimension and wear resistance. Hardness hrc60-62Publisher: INSIZEDetails: Not thread ring gage, 4x8npt.EAN: 6928640347078 shopify_US_849735811119 new 717.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41rTAktEPjL_grande.jpg?v=1528152027 INSIZE Dimensional Measurement yes 6928640347078 0.0 kg Stabila 196 Level Set Kit - 78"/58"/32"/24"/16" Torpedo and Case https://jumboindustrial.com/products/stabila-196-level-set-kit-78-58-32-24-16-torpedo-and-case Brand: StabilaColor: YellowFeatures: Stabila Type 196. Our number 1 selling frame design. Certified Level Accuracy .029 degrees - 1/32in over 72 inches - 0.5mm per meter right-side up or upside down. Every level is electronically adjusted, then accuracy inspected and certified.Vials read the same in all positions. Bright easy to read vials will not leak, break, fog or require re-calibration. Level accuracy guaranteed for life. Sizes 16in to 72in have machined top and bottom measuring surfaces.Sizes 16in to 48in have an open (300 degree) center vial. 58in to 96in have a double bridged center vial. Rib-reinforced frame for high strength and light weight. Frame will not warp or twist. Rubberized hand grips for comfort and grip.Shock-absorbing removable endcaps: Prevent slipping on walls and marking walls. Endcaps can be removed to carry pencil lines tight into corners. Large metal hang hole to store the level up and off of the work surface. Electrostatic enamel finish: baked on tough, cleans up with water and brush.Includes: 78"/58"/32"/24"/16" Type 196 Heavy Duty Levels. 10" Torpedo Level. Stabila Carrying Case. Stabila Type 196 Heavy Duty Levels Made in Germany.Publisher: StabilaDetails: Stabila Type 196 Heavy Duty Levels - 78"/58"/32"/24"/16" Torpedo and Case - The best quality will prove its worth. Sooner or later. STABILA levels are unparalleled with regard to their accuracy and dependability. The secret - the vials made of block acrylic glass are firmly epoxy-lock... shopify_US_849734664239 new 519.99 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51DyWyOBmnL_grande.jpg?v=1528152028 Stabila Dimensional Measurement yes 720266004993 0.0 kg Starrett C404R-72 Heavy Spring Tempered Steel Rule With Inch Graduations, 4R Style Graduations, 72" Length 1-1/2" Width, 1/10" Thicknes https://jumboindustrial.com/products/starrett-c404r-72-heavy-spring-tempered-steel-rule-with-inch-graduations-4r-style-graduations-72-length-1-1-2-width-1-10-thicknes Brand: StarrettFeatures: Precision, 72" rule with inch graduations made of spring-tempered steel for increased durabilitySatin chrome finish reduces glare and is rust-resistantEtched 4R style graduations at 1/8", 1/16", 1/32", and 1/64" for accurate measuresNumbered subdivisions for 1/32" and 1/64" on the back for quick readingHole in the end for hanging in a workspace or tool roomPublisher: StarrettDetails: The Starrett 72", double-sided, inch-graduation, precision rule is made of durable spring-tempered steel and has a satin chrome finish that both reduces glare and resists rust and wear. The machine-etched, black 4R style graduations at 1/8", 1/16", 1/32", and 1/64" are easy to read and ensure accurate measures, and numbered subdivisions for 1/32" and 1/64" offer quick reading for increased productivity. The rule is 1-1/2" wide and 1/10" thick. A hole in the end of the rule enables hanging in a workspace or tool room. The rule meets Federal specification GGG-R-791H for accuracy. Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) use... shopify_US_849734008879 new 731.60 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41-CORwOQgL_a1f4fdb4-b6f3-4308-805f-23f55b08e6b7_grande.jpg?v=1528152030 Starrett Dimensional Measurement yes 094713866220 0.0 kg 4 5/8-4 UN Thread Ring Gage 2A GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/4-5-8-4-un-thread-ring-gage-2a-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 4 5/8-4 UN thread ring gageClass of fit: 2A including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Solid RH( right hand)we will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 4 5/8-4 UN thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769021845EAN: 0763769021845 shopify_US_849732927535 new 726.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41o7_2BRGAQ4L_187cc3bb-085c-409a-89e1-3dd86198cc92_grande.jpg?v=1528152032 Linsen Dimensional Measurement yes 763769021845 0.0 kg Laser Digital Theodolite 2 Seconds Accuracy With Dual Keyboard IP55 Rating https://jumboindustrial.com/products/laser-digital-theodolite-2-seconds-accuracy-with-dual-keyboard-ip55-rating Brand: Survey ProFeatures: Laser IndicatorAccuracy: 2″Water and Dust Proof: IP 55Dual LCD DisplayOperating time: 10hoursPublisher: Omni Optical ProductsDetails: This theodolite features a rugged body design that is able to withstand harsh environments. Its operating time of 10 hours insures you have the battery you need to get the job done.UPC: 041967299359EAN: 0041967299359 shopify_US_849732304943 new 693.50 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41pfXIg7QEL_grande.jpg?v=1528152033 Survey Pro Dimensional Measurement yes 041967299359 0.0 kg Spectra Precision Laser LL300N Automatic Self-leveling Level w/HL450 Receiver, Alkaline Batteries https://jumboindustrial.com/products/spectra-precision-laser-ll300n-automatic-self-leveling-level-w-hl450-receiver-alkaline-batteries Brand: Spectra Precision LaserFeatures: Basic LL300N package includes HL450 Reciver, rod clamp, 4 "D" Alkaline batteries and carrying case.Meets IP66 Water and Dust Resistant standardsLaser Accuracy of + or -3/32 in at 100ft (+ or - 2.2 mm at 30m). Operating Range: 1650 ft (500m) diameter. Self Leveling Range: + or - 5 degreeDrop Height on Concrete Performance: 3ft (1m)Fully automatic electronic Self-leveling( with HI Alert) for fast andamp; accurate setups and a 5 year warranty.Class 2 Laser and shopify_US_849730994223 new 716.99 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51a_2BI9hLMrL_grande.jpg?v=1528152034 Dimensional Measurement no 0.0 kg NEWTRY DS2-5000N-XB Series High Precision Miniature Coin Type Digital Display External Sensor Tension And Pressure Ergometer/ Push Pull M... https://jumboindustrial.com/products/newtry-ds2-5000n-xb-series-high-precision-miniature-coin-type-digital-display-external-sensor-tension-and-pressure-ergometer-push-pull-meter-pressure-tester-force-gauge-0-5000n-ds2-5000n-xb Brand: NEWTRYFeatures: 1. extra long standby2. USB communication function3., perfect access to PLC industrial control system (optional function, standard table does not have this function)4. panel adopts PET environmental protection nameplate, the color matching design is reasonable, the button adopts high-grade export environmental protection button, and it feels comfortable, flexible and durable (up to 100 thousand times the key life)5. aluminum alloy shell, according to ergonomic design, easy to hold, test and fixed on the test bench, aluminum alloy shell, no money interference, strong ability to ensure that the measured data is true, reliable and stablePublisher: NEWTRYDetails: Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Product Description DS2 series digital push pull meter is a small, multi-function and high precision push and pull load test instrument. It is suitable for various kinds of push and pull load test, plug and thrust test, damage test and so on. The digital display has the advantages of high resolution, convenient operation, long service life, long standby and simple operation Technical Parameter Maximum load value:50N(5Kgf)~5000N(500kgf) Display: 4 bit LCD display Safety overload: 150% rated (100% flashing warning) Power supply: built in safety, durable, high-capacity lithium battery, external AC adapter Weight: approximately 520g, depending on maximum load value. Output function: U... shopify_US_849730863151 new 729.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/513TmfaJSOL_grande.jpg?v=1528152035 NEWTRY Dimensional Measurement yes 7592259159903 0.0 kg Fowler 53-710-175 Universal 3D Mechanical Sensor with 3/4" Shank Diameter and 0.2" Sensor Diameter https://jumboindustrial.com/products/fowler-53-710-175-universal-3d-mechanical-sensor-with-3-4-shank-diameter-and-0-2-sensor-diameter Brand: FowlerFeatures: 1 year warranty offered by Fowler High PrecisionPublisher: Fred V. Fowler Company, Inc.Details: The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.UPC: 646795132412EAN: 0646795132412 shopify_US_849730764847 new 370.83 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41wHFuimU4L_grande.jpg?v=1528152035 Fowler Dimensional Measurement yes 646795132412 0.0 kg INSIZE 3206-28 Outside Micrometer with Interchangeable Anvils, 24" -28", Graduation .001" https://jumboindustrial.com/products/insize-3206-28-outside-micrometer-with-interchangeable-anvils-24-28-graduation-001 Brand: INSIZEFeatures: Ratchet stop. Carbide measuring facesSupplied with setting standardsLock nut and ratchet in case and traceable to nistPublisher: INSIZEDetails: Outside micrometer with interchangeable anvils, 24-28", graduation 001".EAN: 6928640327353 shopify_US_849730273327 new 853.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41F9LIvtFpL_grande.jpg?v=1528152037 INSIZE Dimensional Measurement yes 6928640327353 0.0 kg Mitutoyo 340-251-30 OMC-150MX Interchangeable Anvil Micrometer, IP65, 0 mm-150 mm, 0.001 mm https://jumboindustrial.com/products/mitutoyo-340-251-30-omc-150mx-interchangeable-anvil-micrometer-ip65-0-mm-150-mm-0-001-mm Brand: MitutoyoFeatures: Wide measuring range with interchangeable anvilsSupplied with zero-setting standards bar for each rangeHas SPC data outputPublisher: MitutoyoRelease Date: 2017-03-12Details: Mitutoyo 340-251-30 OMC-150MX, Micrometer, Interchangeable Anvil, 0-150 mm, 0.001 mm, IP65.EAN: 4946368695884 shopify_US_849730109487 new 311.45 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51JqYU8YorL_grande.jpg?v=1528152037 Mitutoyo Dimensional Measurement yes 4946368695884 0.0 kg Starrett 216MXRL-275 Digital Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 250-275mm Range, 0.01mm Graduation, +/-0.007mm Accuracy https://jumboindustrial.com/products/starrett-216mxrl-275-digital-micrometer-ratchet-stop-lock-nut-carbide-faces-250-275mm-range-0-01mm-graduation-0-007mm-accuracy Brand: StarrettFeatures: Tapered frame for measuring narrow slots and tight spacesMechanical digit counter for ease of reading to 0.01mmRatchet-stop mechanism helps provide uniform pressure for precise, repeatable measurementsSatin chrome finish on thimble and sleeve helps resist rust and reduce glareMicro-lapped carbide measuring faces help provide accuracy and wear resistancePublisher: StarrettDetails: The Starrett 216MXRL series outside micrometer has a mechanical digit counter for ease of reading to 0.01mm, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a black enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may... shopify_US_849729781807 new 733.52 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ZKdRlna9L_grande.jpg?v=1528152038 Starrett Dimensional Measurement yes 049659643572 0.0 kg Mahr Federal 4126757 Marcal 30 EWRi Integrated Wireless Digital Depth Gage, Round Depth Rod and MarConnect, IP-67, In/mm, 0-20'', 0.0005'... https://jumboindustrial.com/products/mahr-federal-4126757-marcal-30-ewri-integrated-wireless-digital-depth-gage-round-depth-rod-and-marconnect-ip-67-in-mm-0-20-0-0005-resolution-0-20-0-500-mm-auto-on-off-0-0005-0-01-mm-graduation Brand: Mahr FederalColor: Black/RedFeatures: MarCal. The New Generation. Waterproof Digital Depth Gage with Integrated Wireless and The Reference-System. Use with MarCom and for the most cost effective data collection measuring systemWith Integrated Wireless Data acquisition with digital calipers is now even simpler: Simply transmit your measured data without cables directly into Microsoft Office Excel or other Windows programsMarCal Depth Gages are equipped with the innovative Reference-System. The zero position just has to be set once and remains stored for all further measurementsThe digital depth gage MarCal 30 EWRi Reference is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoidedPublisher: Mahr FederalDetails: Mahr Federal MarCal 4126757 30 EWRi Digital Depth Gage, with Integrated Wireless has a 0 to 20" (0 to 500mm) measuring range with 0.0005" (0.01mm) resolution for precision results. With Integrated Wireless, you have a new Integrated Wireless data transmission system from Mahr for the price of a data cable. Data acquisition with digital calipers is now even simpler: Simply transmit your measured data without being caught up between cables directly into Microsoft Office Excel or via a keyboard code into any Windows program. With Integrated Wireless your data will be transferred to the digital indicator; this is confirmed with a message in the digital display to whether the sent data has been transferre... shopify_US_849729683503 new 493.32 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31nkozcTD-L_grande.jpg?v=1528152038 Mahr Federal Dimensional Measurement yes 712155481480 0.0 kg .917" to 1.000" Minus English Class Z Gage Set https://jumboindustrial.com/products/917-to-1-000-minus-english-class-z-gage-set Brand: Meyer GageFeatures: Class Z Tolerance of - 0 .0001Hardness of 60 - 62 Rockwell CMaterial E52100 bearing quality steelGeometry of pin is within .00005"Surface finish 8 micro-inch or betterPublisher: Meyer GageDetails: Meyer Gage Company, a world leader in the manufacture of fixed limit gages offers these affordable pin gage sets in Minus ( - .0001” / +.0000” ) and come packaged with box and insert clearly marked. Used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. They are one half the deviation of the ZZ for a better fit. (Note diameters above .8250″ tolerance increases, see gage makers tolerance chart) Uses – for precision GO/NOGO measuring of hole sizes and depths, checking hole location and distance, and setting micrometers. All gages are uniformly 2″ long with ground ends, allowing you to use both ends for increased gage life. Gages are Carbon Chrome Alloy Steel (grade E52100 bearing quality steel) and heat treated to 60-62 Rockwell C hardness. All of our products come with a Certificate of Class Conformance, traceable to NIST (National Institute for Standards Technology). The size and “+” (GO) or “-” (NOGO) are laser etched with a Meyer Exclusive Serial Number feature to ensure traceability on your shop floor on all gages that are .061″ and larger. Founded in 1960 Meyer Gage Company is an ISO 9001:2008 approved manufacturer, and all products pass through our ISO /IEC 17025:2005 approv... shopify_US_849728602159 new 684.19 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51orQ5nRRpL_53cf97ea-36c8-47dc-b564-7387f03b959b_grande.jpg?v=1528152039 Meyer Gage Dimensional Measurement yes 191348000354 0.0 kg INSIZE 6889-2 Magnetic V-Blocks, 3.9" x 2.8" x 3.7", Pair https://jumboindustrial.com/products/insize-6889-2-magnetic-v-blocks-3-9-x-2-8-x-3-7-pair Brand: INSIZEFeatures: Matched pair. Hardened, high accuracy, strong magnetic force, for grinding, light millingDrilling and inspection of round and square jobs. All working surfaces are hardened to hrc60±2Magnetic force on top, bottom and two v grooves. V groove on the top for large shaftsV groove on the bottom for small shaftsSuitable for cast iron surface plates and granite surface platesPublisher: INSIZEDetails: Magnetic v-blocks, 3.9x2.8x3.7", pair.EAN: 6928640320804 shopify_US_849728012335 new 860.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41OkQoCd4YL_173aa3c2-80cd-43c0-8994-fdf2364ac5a6_grande.jpg?v=1528152040 INSIZE Dimensional Measurement yes 6928640320804 0.0 kg Starrett 764BXFL LCD Sheet Metal Micrometer, Friction Thimble, Lock Nut, Carbide Faces, 0-1" Range, 0.00005" Graduation, Flat Anvil, With... https://jumboindustrial.com/products/starrett-764bxfl-lcd-sheet-metal-micrometer-friction-thimble-lock-nut-carbide-faces-0-1-range-0-00005-graduation-flat-anvil-without-case Brand: StarrettFeatures: Deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber partsDigital, single-value readout LCD displays in inch and metric units for readabilityFriction thimble mechanism helps provide uniform pressure for precise, repeatable measurementKnurled ring-type lock nut to hold measurements in placeMicro-lapped carbide measuring faces help provide accuracy and wear resistancePublisher: StarrettRelease Date: 2017-03-12Details: The Starrett 764 series LCD outside micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise outside diameter (OD) measurements.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A friction thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped fo... shopify_US_849727717423 new 779.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51ghUeafWXL_grande.jpg?v=1528152041 Starrett Dimensional Measurement yes 049659665253 0.0 kg Mitutoyo 172-144 Profile Projector Accessory, ROTARY VISE https://jumboindustrial.com/products/mitutoyo-172-144-profile-projector-accessory-rotary-vise Brand: MitutoyoFeatures: Work piece fixture for profile Projectors and measuring MicroscopesAllows you to set up a Thin work piece easily for inspectionMax. Work piece diameter 2.4 inchPublisher: MitutoyoRelease Date: 2017-05-15Details: Prof proj ACS, rotary vice rotary vise.UPC: 603908051374EAN: 0603908051374 shopify_US_849727160367 new 765.18 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41LTUB9Dy-L_grande.jpg?v=1528152043 Mitutoyo Dimensional Measurement yes 603908051374 0.0 kg INSIZE IST-1W340A Digital Angle Torque Wrench, 602~ 3009" lb./50.1 ~ 250.7' lb. https://jumboindustrial.com/products/insize-ist-1w340a-digital-angle-torque-wrench-602-3009-lb-50-1-250-7-lb Brand: INSIZEFeatures: Accuracy: clockwise ±2 percent, counter-clockwise ±3 percent, angle ±2° (rotate 90°). res: torque 1In.Lb/0.1Ft.Lb, angle 1°. square driver 1/2 inchAfter reaching the desired torque, set the angle and turn the wrench at this angle to apply extra torqueTarget torque or angle value can be set, with audible and visible alarm: green led light on and buzzer soundsBuzzer sounds when target torque or angle value is reachedPublisher: INSIZEDetails: Digital angle torque wrench, 602~ 3009In.Lb/50.1 ~ 250.7ft.Lb.EAN: 6928640326349 shopify_US_849727094831 new 855.37 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31doCQKqVKL_grande.jpg?v=1528152043 INSIZE Dimensional Measurement yes 6928640326349 0.0 kg Paint Gauge/Meter QNix 4500 Paint Meter Gauge F/NFE 120 mil by Automation Dr. Nix https://jumboindustrial.com/products/paint-gauge-meter-qnix-4500-paint-meter-gauge-f-nfe-120-mil-by-automation-dr-nix Brand: Automation Dr. NixPublisher: Automation Dr. NixDetails: Paint Thickness Meter / Gauge - QNix 4500 was developed for measuring tasks in the automobile industries. This compact Paint Meter / Gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix Paint Thickness Meter / Gauges: With the QNix 4500 Paint Thickness Meter / Gauge, precise measurements on steel, iron and non-ferrous metals become simply perfect. Change between the measuring procedures is now automatic. No calibration required. With high precision over the entire measuring range: Fe 120 mils and NFe 120 mils. The sensitive measuring paint meter probe of the extremely small, light and handy QNix 4500 Paint Thickness Meter / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. The sensitive measuring probe of the extremely small, light and handy QNix 4500 Paint Thickness Meter / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor and Eddy Current technolo... shopify_US_849727062063 new 745.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/412ZKuEnK5L_c65f3f73-7302-4d4c-9aef-759fc513e3c7_grande.jpg?v=1528152043 Automation Dr. Nix Dimensional Measurement yes 7434000942948 0.0 kg Mitutoyo 422-331-30 BLM-2"MX Blade Micrometer, Type A, 1"-2", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-422-331-30-blm-2mx-blade-micrometer-type-a-1-2-0-00005-0-001-mm Brand: MitutoyoFeatures: The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard to reach areasSpeedy spindle feed of .4 In/10mm/revWith Ratchet Stop for constant measuring forceNon-rotating spindle eliminates torque on work pieceWith a standard barPublisher: MitutoyoRelease Date: 2017-05-15Details: Mitutoyo 422-331-30 BLM-2"MX, Micrometer, Blade, Type A, 1-2",.00005"/0.001 mm.EAN: 4946368689906 shopify_US_849726668847 new 767.94 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51BKcNQ8PKL_grande.jpg?v=1528152044 Mitutoyo Dimensional Measurement yes 4946368689906 0.0 kg INSIZE 3203-1212A Outside Micrometer, 0" - 12", Graduation .0001" https://jumboindustrial.com/products/insize-3203-1212a-outside-micrometer-0-12-graduation-0001 Brand: INSIZEFeatures: Carbide measuring facesSupplied with setting standards (except 0-1 inchLock nut and ratchet in case and traceable to nistPublisher: INSIZERelease Date: 2017-03-12Details: Outside micrometer, 0-12", graduation 0001".EAN: 6928640327230 shopify_US_849726439471 new 771.49 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/411JIjs6e7L_grande.jpg?v=1528152044 INSIZE Dimensional Measurement yes 6928640327230 0.0 kg Brown and Sharpe 599-281-24 2.000 -2.400" INTRIMIK Micrometer https://jumboindustrial.com/products/brown-sharpe-599-281-24-2-000-2-400-intrimik-micrometer Brand: TESA Brown andamp; SharpeFeatures: Intrimik measuring arms move at right angles to the spindleAnalog reading, with graduationsInstruments in the range 0.275" to 4.00" have hardened steel measuring points (770 HV)Instruments in the range 4.00" to 12.00" have tungsten carbide inserts in the measuring points (1300 HV)Publisher: Hexagon MetrologyDetails: Internal micrometersUPC: 622419439945EAN: 0622419439945 shopify_US_849724669999 new 786.99 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Z8mlE9QPL_8e55a6fa-bbd2-4b1f-a921-1523ffd0af81_grande.jpg?v=1528152046 TESA Brown & Sharpe Dimensional Measurement yes 622419439945 0.0 kg Mitutoyo 543-595B Calculation Type Indicator, 50.8 mm, Stem https://jumboindustrial.com/products/mitutoyo-543-595b-calculation-type-indicator-50-8-mm-stem Brand: MitutoyoFeatures: Features both a key-lock and a Parameter-Lock. This is designed to prevent accidental changing of settings during operationFast measurement frequency allows the user to increase the Number of readings per second from 10-50, allowing higher accuracy measurements of TIR and max/minAn analog bar provides easy to read values when scanning for max, min, and TIR valuesPublisher: MitutoyoRelease Date: 2017-03-12Details: Calculation Type indicator, 50.8mm, 8mm stemUPC: 603908591368EAN: 0603908591368 shopify_US_849724407855 new 770.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Cqg-BbTjL_grande.jpg?v=1528152047 Mitutoyo Dimensional Measurement yes 603908591368 0.0 kg Mitutoyo 543-596B Calculation Type Indicator, 50.8 mm/2.0", 8 mm Stem https://jumboindustrial.com/products/mitutoyo-543-596b-calculation-type-indicator-50-8-mm-2-0-8-mm-stem Brand: MitutoyoFeatures: The new Calculation-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock. This is designed to prevent accidental changing of settings during operationImproved parameter setting software makes it even easier to set all of the available parameters and determine and upload the proper coefficients for calculation.(optional)FAST measurement frequency allows the user to increase the number of readings per second from 10 to 50Publisher: MitutoyoDetails: 2 in/50.8mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Calculation Type.UPC: 603908594246EAN: 0603908594246 shopify_US_849724309551 new 770.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31COQXssK-L_grande.jpg?v=1528152048 Mitutoyo Dimensional Measurement yes 603908594246 0.0 kg Stabila 02090 Type LA90L Laser Kit Manual Alignment https://jumboindustrial.com/products/stabila-02090-type-la90l-laser-kit-manual-alignment Brand: StabilaFeatures: Sharp, straight lines: 2 vertical, 1 horizontal, plumb up and downManual Alignment: the laser pivots precisely left and right with the control knobTransfers lines from the floor, to walls, to ceilingLaser designed to set up over cornersRange of visible ine: 60'Class IIPower output shopify_US_849723949103 new 795.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51VHuzE2bsL_grande.jpg?v=1528152049 Dimensional Measurement no 0.0 kg Mitutoyo 573-291-30 Digimatic Low Force Caliper, 0-7"/0-180 mm, SPC https://jumboindustrial.com/products/mitutoyo-573-291-30-digimatic-low-force-caliper-0-7-0-180-mm-spc Brand: MitutoyoFeatures: Ideal for elastic or resilient workpieces such as plastic parts and rubber parts that standard Calipers cannot measureWith SPC data outputSupplied in a fitted plastic casePublisher: MitutoyoDetails: DIGIMATIC low force caliper, 0-7"/0-180mm, SPCUPC: 603908594956EAN: 0603908594956 shopify_US_849723752495 new 783.17 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31N7y66z0KL_grande.jpg?v=1528152049 Mitutoyo Dimensional Measurement yes 603908594956 0.0 kg David White LT8-300P Universal Level-Transit, with Optical Plummet https://jumboindustrial.com/products/david-white-lt8-300p-universal-level-transit-with-optical-plummet Brand: David WhiteFeatures: 3/16-in at 150-ft (4.75mm at 45m) leveling accuracyUp to 400-ft (120m) rangeHorizontal circle, lock and tangentVertical arc, lock and tangent1:100 stadia with glass reticlePublisher: SiteProDetails: LT8-300P universal optical level transit features optical plummet. Ruggedness and dependability makes this five minute instrument the first choice for practically every horizontal and vertical sighting application in construction.UPC: 816255020102EAN: 0816255020102 shopify_US_849723523119 new 910.76 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/510iIHa6OsL_grande.jpg?v=1528152050 David White Dimensional Measurement yes 816255020102 0.0 kg Mitutoyo ABSOLUTE 573-661 Digital Caliper, Stainless Steel, Battery Powered, Pipe Measuring Jaw, 0-150mm Range, +/-0.05mm Accuracy, 0.01m... https://jumboindustrial.com/products/mitutoyo-absolute-573-661-digital-caliper-stainless-steel-battery-powered-pipe-measuring-jaw-0-150mm-range-0-05mm-accuracy-0-01mm-resolution-meets-ip67-specifications Brand: MitutoyoFeatures: Range is 0 - 150 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.05 mmHardened stainless steel construction for protection of caliper componentsMain scale jaw is a round bar to facilitate the measurement of tube wall thicknessIP67-certified for protection against dust and temporary submersion in waterFunction control buttons on caliper face for ease of access: Origin-set, Zero-setting, Power On/Off, Data OutputPublisher: MitutoyoDetails: The Mitutoyo 573-661 Digimatic tube thickness digital caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has a round bar type main scale jaw for measuring tube wall thickness. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. The 573-661 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 167 g. Range is 0 - 150 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.05 mm. Also included are Origin-setting, Zero-setting, and Power On/Off automatic shutoff function buttons. This caliper is Ingress Protection 67 (IP67)-certified for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial da... shopify_US_849723326511 new 645.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31Mm-VX5m-L_grande.jpg?v=1528152050 Mitutoyo Dimensional Measurement yes 4946368567655 0.0 kg Mitutoyo 543-554A ID-F (In/mm), 0-2", 120V AC https://jumboindustrial.com/products/mitutoyo-543-554a-id-f-in-mm-0-2-120v-ac Brand: MitutoyoFeatures: An analog bar provides easy to read values when scanning for max, min, and TIR valuesGO/±ng judgement is performed by setting the upper and lower tolerances for max, min, and runout valuesWith SPC data outputPublisher: MitutoyoDetails: Id-f (in/mm), 0-2", 120V ACUPC: 603908247012EAN: 0603908247012 shopify_US_849721688111 new 780.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41YL9X4ZPvL_grande.jpg?v=1528152054 Mitutoyo Dimensional Measurement yes 603908247012 0.0 kg Mitutoyo 326-253-30 TMC-75MX Micrometer https://jumboindustrial.com/products/mitutoyo-326-253-30-tmc-75mx-micrometer Brand: MitutoyoFeatures: Interchangeable Anvil-SpindleWith ratchet stop for constant forceSPC outputIP65 water/dust protectionPublisher: MitutoyoDetails: Mitutoyo 326-253-30 Tmc-75MX, Tmc-75MX.EAN: 4946368695785 shopify_US_849721360431 new 782.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51jLC_2Bke_2BeL_grande.jpg?v=1528152056 Mitutoyo Dimensional Measurement yes 4946368695785 0.0 kg QNix 4200 Coating Thickness Gauge - Paint Meter w/ Integrated Fe 200 mil Cable Probe by Automation Dr. Nix https://jumboindustrial.com/products/qnix-4200-coating-thickness-gauge-paint-meter-w-integrated-fe-200-mil-cable-probe-by-automation-dr-nix Brand: Automation Dr. NixPublisher: Automation Dr. NixDetails: Quanix/Qnix Coating Thickness Gage / Paint Thickness Meter / Gauge -QNix 4200 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the Paint Thickness Meter / Gauge -QNix 4200 precise measurements on steel, iron become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 120 mils. The sensitive measuring probe of the extremely small, light and handy Paint Thickness Meter / Gauge QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. The sensitive measuring probe of the extremely small, light and handy QNix 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. (QNix 4200 Coating Thickness Gauge - Paint Meter w/ Integrated Fe 200 mil Cable Probe by Automation Dr. Nix)EAN: 7434000044062 shopify_US_849721262127 new 760.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41FMrkW5_2BkL_grande.jpg?v=1528152056 Automation Dr. Nix Dimensional Measurement yes 7434000044062 0.0 kg Mitutoyo 511-853 Dial Bore Gage, 2.4-4.0", 0.0001" Graduation, Stem Diameter 3/8" with2923SB-10 Dial Indicator https://jumboindustrial.com/products/mitutoyo-511-853-dial-bore-gage-2-4-4-0-0-0001-graduation-stem-diameter-3-8-with2923sb-10-dial-indicator Brand: MitutoyoFeatures: Carbide-tipped contact points for durabilityThe dial indicator is fully protected by a rugged coverOptional extension rods can be attached for measuring deep holesPublisher: Mitutoyo America CorporationRelease Date: 2017-03-12Details: Mitutoyo Dial Bore Gage 511-853, 2.4-4.0 In with2923SB-10 dial indicator, 0.0001 In graduation, stem 3/8 In diam.EAN: 4946368613345 shopify_US_849720836143 new 760.48 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_1498b759-d18a-466d-9d2f-9803e02f6a36_grande.jpg?v=1528152056 Mitutoyo Dimensional Measurement yes 4946368613345 0.0 kg Mitutoyo 209-558 Caliper Gauge, Inch/Metric, Pointed Jaw, 2.76-3.54" Range, +/-0.0015" Accuracy, 0.0005" Resolution, Meets IP63/IP67 Spec... https://jumboindustrial.com/products/mitutoyo-209-558-caliper-gauge-inch-metric-pointed-jaw-2-76-3-54-range-0-0015-accuracy-0-0005-resolution-meets-ip63-ip67-specifications Brand: MitutoyoFeatures: Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thicknessLarge measuring depth for hard-to-reach outside dimensionsCombination analog/digital LCD readout displays in inches or metric units for viewing easeStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerRated IP67 for resistance to penetration by dust and submersion in liquidPublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered... shopify_US_849720442927 new 648.08 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31vROWkHFpL_grande.jpg?v=1528152057 Mitutoyo Dimensional Measurement yes 603908540199 0.0 kg Mitutoyo 209-552 Caliper Gauge, Inch/Metric, Pointed Jaw, 0.39-1.18" Range, +/-0.0015" Accuracy, 0.0005" Resolution, Meets IP63/IP67 Spec... https://jumboindustrial.com/products/mitutoyo-209-552-caliper-gauge-inch-metric-pointed-jaw-0-39-1-18-range-0-0015-accuracy-0-0005-resolution-meets-ip63-ip67-specifications Brand: MitutoyoFeatures: Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thicknessLarge measuring depth for hard-to-reach outside dimensionsCombination analog/digital LCD readout displays in inches or metric units for viewing easeStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerRated IP67 for resistance to penetration by dust and submersion in liquidPublisher: MitutoyoRelease Date: 2017-05-15Details: The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered... shopify_US_849720148015 new 648.08 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31s7FXA0qZL_grande.jpg?v=1528152057 Mitutoyo Dimensional Measurement yes 603908536338 0.0 kg Mitutoyo 209-572 Caliper Gauge, Inch/Metric, Pointed Jaw, 0-0.78" Range, +/-0.001" Accuracy, 0.0005" Resolution, Meets IP63/IP67 Specific... https://jumboindustrial.com/products/mitutoyo-209-572-caliper-gauge-inch-metric-pointed-jaw-0-0-78-range-0-001-accuracy-0-0005-resolution-meets-ip63-ip67-specifications Brand: MitutoyoFeatures: Outside dimension (OD) measurement capability for measuring hole diameters and groove and tube thicknessLarge measuring depth for hard-to-reach external dimensionsCombination analog/digital LCD readout displays in inches or metric units for viewing easeStatistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computerRated IP67 for resistance to penetration by dust and submersion in liquidPublisher: MitutoyoRelease Date: 2017-03-12Details: The Mitutoyo 209 series Digimatic caliper gauges have a combination analog/digital LCD display and large measuring depth for taking outside dimension (OD) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach outside dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring external wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately) for statistical process control (SPC). The unit comes with, and is powered by, a single AA battery that lasts approxim... shopify_US_849720082479 new 760.76 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BTI9udVAL_grande.jpg?v=1528152057 Mitutoyo Dimensional Measurement yes 603908536604 0.0 kg Mitutoyo 368-870 HOLTEST, TYPE II, R, 2.0" - 2.5" https://jumboindustrial.com/products/mitutoyo-368-870-holtest-type-ii-r-2-0-2-5 Brand: MitutoyoFeatures: 368-870Publisher: MitutoyoDetails: Mitutoyo 368-870 HOLTEST, TYPE II, R, 2.0" - 2.5"UPC: 603908393405EAN: 0603908393405 shopify_US_849719656495 new 622.40 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31grgPk0Y1L_f7648329-b37f-4c61-861c-ae4269c75668_grande.jpg?v=1528152058 Mitutoyo Dimensional Measurement yes 603908393405 0.0 kg E-RM20J https://jumboindustrial.com/products/e-rm20j Brand: KANON (Nakamura MFG)Features: Brand New ProductPublisher: ChinaDetails: Can be used for parties,Halloween,costume party.EAN: 4582126961800 shopify_US_849719394351 new 762.60 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21c_2BUlMruSL_02c36759-afd7-49fb-9af5-f903d4dfae0f_grande.jpg?v=1528152059 KANON (Nakamura MFG) Dimensional Measurement yes 4582126961800 0.0 kg Mitutoyo 422-370-30 BLM-1"WMX Blade Micrometer, Type C, 0"-1", 0.00005"/0.001 mm https://jumboindustrial.com/products/mitutoyo-422-370-30-blm-1wmx-blade-micrometer-type-c-0-1-0-00005-0-001-mm Brand: MitutoyoFeatures: The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard to reach areasSpeedy spindle feed of .4 In/10mm/revWith Ratchet Stop for constant measuring forceNon-rotating spindle eliminates torque on work piecePublisher: MitutoyoDetails: Mitutoyo 422-370-30 BLM-1"WMX, Micrometer, Blade, Type C, 0-1",.00005"/0.001 mm.EAN: 4946368689999 shopify_US_849719296047 new 856.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51BEmmQlZRL_grande.jpg?v=1528152059 Mitutoyo Dimensional Measurement yes 4946368689999 0.0 kg Starrett 656-6041J Dial Indicator, .001-Inch Graduation, 6.000-Inch Measuring Range, 0-100 Dial Reading, AGD Group 4, Jeweled Bearings, L... https://jumboindustrial.com/products/starrett-656-6041j-dial-indicator-001-inch-graduation-6-000-inch-measuring-range-0-100-dial-reading-agd-group-4-jeweled-bearings-lug-on-center-back Brand: StarrettFeatures: Rugged and simple unit construction with a "universally fitting" designOne gear unit assemblyNon-reflecting yellow finish on dialUnbreakable crystalThe gear unit is constructed of a massive single bridge and plate assembly with a hardened stainless steel gear trainPublisher: StarrettDetails: Starrett 656 Series Dial Indicators with Extra Long Range. These indicators have a shockless, hardened steel gear train and are furnished with jewel bearings and lug-on-center backs. Conforms to AGD specifications except for range. Furnished with continuous reading double dial.UPC: 049659538038EAN: 0049659538038 shopify_US_849719099439 new 807.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21wt2VAVh4L_grande.jpg?v=1528152061 Starrett Dimensional Measurement yes 049659538038 0.0 kg Analytical Balance 120 g x 0.1 mg High-Precision Digital Balance Scale For Lab Pharmacy 120g/0.1mg 110v/220v https://jumboindustrial.com/products/analytical-balance-120-g-x-0-1-mg-high-precision-digital-balance-scale-for-lab-pharmacy-120g-0-1mg-110v-220v Brand: HanchenFeatures: Tare function and Automatic calibrationSeven unit conversion and counting functionLCD big screen digital display and overload pan pretectionThe all-aluminum shell and Electromagnetic balancing type sensorRange 0-120g and Precision 0.1mg / 220V 110VPublisher: Hanchen InstrumentDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description This kind of high-precision digital balance scale is very suitable for the laboratory and pharmacy. Features : Tare function Level-4 shockproof High sensitivity buttons Overload pan protection Automatic calibration Unit conversion Counting function LCD digital display The all-aluminum shell Electromagnetic balancing type sensor data port connection with computer Temperature compensation function Technical Datas Capacity size : 0~120g Power supply voltage:110V 220V 50Hz Resolution :0.1mg Pan size : Φ90mm Repeatability(≤mg):±0.1 Linearity(≤mg):±0.2 Operating temperature :20±2℃ Operating Humidity :45~60%RH Net Weight :about 7 kg. NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us UPC: 600055809858EAN: 0600055809858 shopify_US_849717624879 new 769.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41qrd0rFncL_2fee2156-fc0a-4f30-a387-cdc29372f621_grande.jpg?v=1528152063 Hanchen Dimensional Measurement yes 600055809858 0.0 kg Mitutoyo 570-312 Electronic HDS Digimatic 12"×0.0005"/0.01mm Height Gage Inch/Metric https://jumboindustrial.com/products/mitutoyo-570-312-electronic-hds-digimatic-12-0-0005-0-01mm-height-gage-inch-metric Brand: MitutoyoFeatures: Larger LCD screen for easy and clear to readoutRange: 0-300mm / 0"-12"; Accuracy: 0005"/0.01 mmTexture of material:carbideHand-operated feed wheel make measurements more convenientWaterproof,dust resistant,SR44 battery,The measurements will be transmitted to the Mitutoyo miniprocessor or computerPublisher: MitutoyoDetails: The Mitutoyo 570-312 absolute digimatic height gauge is a digital height gauge made of carbide and uses Mitutoyo's ABSOLUTE linear encoder technology. As with two-column structure, use handwheel to move smoothly and down,The main ruler (35x15mm) has been improved and designed to ensure high durability and high accuracy. Built-in absolute linear encoder, using a linear encoder do not set the reference point every time.The battery life is normally used up to 20,000 hours.Precise Black granite Platform. The character height of LCD digital display is 10mm,Ergonomic design, comfortable grip. What's in the Box? Mitutoyo 570-312 Absolute Digimatic Height Gauge SR44 battery Protective caseUPC: 603717394105EAN: 0603717394105 shopify_US_849717461039 new 747.47 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31ZPsK4CA6L_grande.jpg?v=1528152064 Mitutoyo Dimensional Measurement yes 603717394105 0.0 kg Starrett 657-811Z Magnetic Base and Swivel Post Assembly, With 811-1Z Indicator and PT22428 Swivel Post Snug https://jumboindustrial.com/products/starrett-657-811z-magnetic-base-and-swivel-post-assembly-with-811-1z-indicator-and-pt22428-swivel-post-snug Brand: StarrettFeatures: Inch reading setsWith finished wood casePublisher: StarrettRelease Date: 2017-05-15Details:     Starrett 657-811Z Magnetic Base and Swivel Post Assembly, With 811-1Z Indicator and PT22428 Swivel Post Snug. Powerful, permanent magnetic base holds firmly to steel or iron surfaces – horizontally, vertically, upside-down. Push-button turns magnetic force on or off for quick, one-hand set-up and take-down. V-step adapts base to horizontal or vertical arbors and chucks. There is an extra 1/4-20 NC tapped hole in side of base for indicator mounting post. Three precision ground magnetic contact surfaces (plus V-step). Black wrinkle finish on non-working surfaces.   Magnetic Base Assembly Features: 1. 657P Magnetic Base is 1-15/16" x 1-5/8" x 1-7/8" (50 x 40 x 48mm) deep. 2. Swivel Cap Slot permits 90º post travel to horizontal position. 3. Post rotates 360º. 4. 657F Indicator Swivel Post Assembly is 6-1/2" (165mm) high (less threaded end). 5. Fine-Adjusting Screw. Turn to zero set indicator. 6. Upper arm is 2" (50mm) long with a 5/16" (8mm) diameter and swings more than 180º; friction joint holds it in position. 7. 7/32" (5.5mm) diameter step, 1/2" (13mm) long.   811 Indicator  Features: 811 Test Indicators the most versatile and unique indicators available, the swivel head feature allows positioning to suit your line of sight from horizontal to vertical and at any angle up to 90º. Two positioning mounts work with dovetail test indicator accessories... shopify_US_849717166127 new 641.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41rvIhXMwfL_grande.jpg?v=1528152065 Starrett Dimensional Measurement yes 049659652581 0.0 kg Mitutoyo 293-962-30 Digimatic Micrometer Set, Range: 0-75 mm https://jumboindustrial.com/products/mitutoyo-293-962-30-digimatic-micrometer-set-range-0-75-mm Brand: MitutoyoFeatures: Anti-slip finish for improved grip while take measuremntsPublisher: MitutoyoDetails: The ratchet thimble mechanism helps to ensure repeatable results by transmitting micro vibrations along the spindle to the contact face to provide a constant measuring force and encourage good contact with the work piece. The ratchet works from the thimble as well as the speeder so it is always easy to use even when making measurements one handed. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.EAN: 4946368673202 shopify_US_849717067823 new 737.16 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/51n6ywM9VsL_grande.jpg?v=1528152066 Mitutoyo Dimensional Measurement yes 4946368673202 0.0 kg IRWIN Strait-Line 2035401 Magnetic Door Jamb Kit (78-Inch and 32-Inch) https://jumboindustrial.com/products/irwin-strait-line-2035401-magnetic-door-jamb-kit-78-inch-and-32-inch Brand: Irwin ToolsFeatures: Continuous Edge Center VialRugged Box Beam ConstructionPatented Keyed Insert SystemMachined Acrylic VialsPatented Hex Key Calibration and Easy to Read Plumb ViewPublisher: American Tool CompaniesWarranty: Customer SatisfactionDetails: 586-2035401 Features: -Patented hex key vial calibration for guaranteed accuracy.-Plumb view window for easy reading.-Continuous edge center vial.-Base Type: Magnetic.-Price is for 1 Carton there are 3KIT/CTN. Construction: -Durable box beam construction withstands up to two-story drop. Dimensions: -Length: 78 in, 32 in..UPC: 038548022505EAN: 0038548022505 shopify_US_849716772911 new 774.19 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/3103GFCQV6L_grande.jpg?v=1528152066 Irwin Tools Dimensional Measurement yes 038548022505 0.0 kg 22.07mm to 23.73mm Plus Metric Class Z Gage Set https://jumboindustrial.com/products/22-07mm-to-23-73mm-plus-metric-class-z-gage-set Brand: Meyer GageFeatures: Class Z Tolerance of + 0.00254mmHardness of 60 - 62 Rockwell CMaterial E52100 bearing quality steelGeometry of pin is within .00013mmSurface finish 8 micro-inch or betterPublisher: Meyer GageDetails: Meyer Gage Company, a world leader in the manufacture of fixed limit gages offers these affordable class z pin gage sets in Plus ( +0.00254mm / -0.00000mm ) and come packaged with box and insert clearly marked. Used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. (Note diameters above .8250″ tolerance increases, see gage makers tolerance chart) Uses – for precision GO/NOGO measuring of hole sizes and depths, checking hole location and distance, and setting micrometers. All gages are uniformly 2″ long with ground ends, allowing you to use both ends for increased gage life. Gages are Carbon Chrome Alloy Steel (grade E52100 bearing quality steel) and heat treated to 60-62 Rockwell C hardness. All of our products come with a Certificate of Class Conformance, traceable to NIST (National Institute for Standards Technology). The size and “+” (GO) or “-” (NOGO) are laser etched with a Meyer Exclusive Serial Number Feature to ensure traceability on the shop floor on all gages that are .061″ and larger. Founded in 1960 Meyer Gage Company is an ISO 9001:2008 approved manufacturer, and all products pass through our ISO /IEC 17025:2005 approved laboratory for final inspectionUPC: 1913480... shopify_US_849714675759 new 839.22 USD out of stock http://cdn.shopify.com/s/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_grande.gif Meyer Gage Dimensional Measurement yes 191348041180 0.0 kg Mitutoyo 543-552a Digimatic Indicator Idf https://jumboindustrial.com/products/mitutoyo-543-552a-digimatic-indicator-idf Brand: MitutoyoFeatures: 543-552APublisher: MitutoyoDetails: Digimatic Indicator IdfUPC: 603908007425EAN: 0603908007425 shopify_US_849714511919 new 760.57 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/21OKSMWIy0L_grande.jpg?v=1528152072 Mitutoyo Dimensional Measurement yes 603908007425 0.0 kg Starrett F2740IQ IQ Electronic Indicator, 2" / 50 mm Range https://jumboindustrial.com/products/starrett-f2740iq-iq-electronic-indicator-2-50-mm-range Brand: StarrettFeatures: Rugged, sealed enclosures as standardAmerican designed and manufacturedAdditional power options through AC jack or data outputProgrammable lock combinationUser tolerance settings (high and low)Publisher: StarrettDetails: All indicators feature a glass scale design with an unsurpassed accuracy of ± two resolutions when measuring from a known standard. Rugged, sealed enclosures as standard. American designed and manufactured.UPC: 049659495102EAN: 0049659495102 shopify_US_849713135663 new 785.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31cBTrOzFEL_grande.jpg?v=1528152075 Starrett Dimensional Measurement yes 049659495102 0.0 kg Accusize Tools - 2-40" x 0.001" Inside Micrometer Set, #3011-6051 https://jumboindustrial.com/products/accusize-tools-2-40-x-0-001-inside-micrometer-set-3011-6051 Brand: Accusize Industrial ToolsFeatures: The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting. Carbide measuring faces.Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61". Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximumMeasuring length (mm) [Inch]. Resolution: 0.001". Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers.Carbide V surface. Nice fitted case. Range: 2-40"Extension Rods: 0.5",1",2"(2pcs),4",6",8"(2pcs),12"(2pcs)Publisher: Accusize Co. Ltd.Details: The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting. Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61" Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum measuring length (mm) [Inch]. Resolution: 0.001" Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers. Carbide V surface. Nice fitted case. UPC: 637665773972EAN: 0637665773972 shopify_US_849830543407 new 460.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41N13c7bFmL_grande.jpg?v=1528151833 Accusize Industrial Tools Dimensional Measurement yes 637665773972 0.0 kg Rotary Viscometer Viscosity Tester 1-2000000 mPa.s Rotational Viscosimeter https://jumboindustrial.com/products/rotary-viscometer-viscosity-tester-1-2000000-mpa-s-rotational-viscosimeter Brand: wonderfullife.diyFeatures: used for determining the liquid viscose capacity and the dynamic viscosityIt is a precision instrument to monitor and control the stable quality of productsapplications such as grease, painting, plastic, pharmacy and adhesivesPublisher: wonderfullife.diyDetails: The product usually takes 7--13 business days to arrive to your hand after your order is confirmedDigital Display Rotary Viscometer Viscosity Tester Meter NDJ-4Product DescriptionNDJ-4 rotary viscometer is an instrument used for determining the liquid viscose capacity and the dynamic viscosity. NDJ-4 has been widely used to determine and measure the liquid viscosity in many applications such as grease, painting, plastic, pharmacy and adhesives. It is a precision instrument to monitor and control the stable quality of products in the manufacturing.Technical DatasModel:NDJ-4Measurement Range:10 ~2×106mPa.sRotor Types:1#, 2#, 3#, 4# rotorsRotor Velocity:L(Slow file);0.3、0.6、1.5、3 rpmH(Fast file);6, 12, 30, 60 rpmMeasurement Accuracy:±5% (Newton liquid)Power Supply :220 V ± 10%; 50 Hz ± 10% (110V 60HZ)Dimension:300 × 300 × 450mmN.W.:6 kgNOTE:Please give us your phone number which is to ensure a smooth and safe delivery. And we can also send the product to you as soon as possible ,If you have any questions , please feel free to contact usUPC: 300034012117EAN: 0300034012117 shopify_US_849712250927 new 786.80 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/412nbocA0NL_grande.jpg?v=1528152077 wonderfullife.diy Dimensional Measurement yes 300034012117 0.0 kg Mitutoyo 192-008, Bi-Directional Height Gage Touch Probe https://jumboindustrial.com/products/mitutoyo-192-008-bi-directional-height-gage-touch-probe Brand: MitutoyoFeatures: Bidirectional touch signal probe for Digimatic Series 192 multi-function type height gaugeMeasures height, including step heights, and inside and outside diameters in inches with a measuring force of 0.4N3mm carbide ball tip for hardness and long lifeRepeatability of 2 micrometers and overtravel of 1.5mm for accurate measurements and long probe lifeComes with an integrated 150mm cable, and a holder arm and clamp for attaching to height gaugePublisher: MitutoyoDetails: The Mitutoyo 192-008 bi-directional touch probe works with a Mitutoyo Digimatic Series 192 multi-function type height gauge to measure height, steps, and inside and outside diameters in inches, and has a measuring force of 0.4N, a 3mm carbide ball tip, a repeatability of 2μm, and an overtravel of 1.5mm. The carbide ball tip provides hardness and long life. The probe comes with an integrated 150mm cable, and a holder arm and clamp.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be ... shopify_US_849711923247 new 796.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41Lvco5BTIL_grande.jpg?v=1528152078 Mitutoyo Dimensional Measurement yes 603908245216 0.0 kg 5 3/4-4 UN Thread Plug Gage 2B GO NOGO 100% Calibrated ship by Fedex Delivery in 4 days https://jumboindustrial.com/products/5-3-4-4-un-thread-plug-gage-2b-go-nogo-100-calibrated-ship-by-fedex-delivery-in-4-days Brand: LinsenFeatures: 5 3/4-4 UN thread plug gageClass of fit: 2B including GO NOGOBrand new Standard: ASME B1.2 T=GO Z=NOGO RH( right hand)Style: Taperlock, double ends with handlewe will send by Fedex Delivery in 4 days, clients can receive goods in 4 daysPublisher: Linsen Tool Co.,LTDDetails: Each set of 5 3/4-4 UN thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO. We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.UPC: 763769020022EAN: 0763769020022 shopify_US_849711890479 new 788.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41_2BnUHixVpL_d53fe945-2d4c-4970-aecf-e2df6ef86c83_grande.jpg?v=1528152078 Linsen Dimensional Measurement yes 763769020022 0.0 kg INSIZE 1156-600 Electronic Height Gage with Driving Wheel, 0" - 24" https://jumboindustrial.com/products/insize-1156-600-electronic-height-gage-with-driving-wheel-0-24 Brand: INSIZEFeatures: Resolution: 0005 inchAutomatic power off, move the digital unit to turn on power. Carbide tipped scriberMade of stainless steel. Battery Cr2032. Data outputPublisher: INSIZEDetails: Electronic Height gage with driving wheel, 0-24"/0-600mm.EAN: 6928640350931 shopify_US_849711824943 new 795.02 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31u9sZxnh-L_grande.jpg?v=1528152078 INSIZE Dimensional Measurement yes 6928640350931 0.0 kg Mitutoyo 192-150, Dial Height Gage, 12" X .001", With Digit Counter https://jumboindustrial.com/products/mitutoyo-192-150-dial-height-gage-12-x-001-with-digit-counter Brand: MitutoyoFeatures: Measurement range of 0" - 12", and precise to 0.001"Dial display with resettable up and down counters to help provide precise measurementsHand-operated feed wheel for measurement easeCarbide-tipped scriber for hardness and to help prolong lifeThe grip-base helps hold the unit in position by handPublisher: MitutoyoDetails: The Mitutoyo 192-150 dial height gauge has a measurement range of 0” - 12”, and is precise to 0.001”, with + or - 0.0015” of accuracy. This height gauge has dual, resettable counters that additionally measure up and down distance changes, 0. 01” increments. A hand-operated feed wheel raises and lowers the gauge on the parallel beams, for ease of measurement. The scriber, used to mark a position on a workpiece, is 30 mm x 60 mm (H x L), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. The grip-base helps hold the unit in position by hand. The height gauge weighs 9.26 lbs/4.2 kg. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointe... shopify_US_849711759407 new 781.56 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31MA2IiJd-L_8a5110cb-d953-470e-b731-0b24e45605bf_grande.jpg?v=1528152078 Mitutoyo Dimensional Measurement yes 603908258377 0.0 kg Starrett 2700-802 Backlight Electronic Indicator with 2"/50 mm Range and .0005"/0.01 mm Resolution, SPC output and 3/8" Stem Diameter https://jumboindustrial.com/products/starrett-2700-802-backlight-electronic-indicator-with-2-50-mm-range-and-0005-0-01-mm-resolution-spc-output-and-3-8-stem-diameter Brand: StarrettFeatures: Set tolerances to back lights (red, Green, amber)Analog visual displayUSB/AB power cable includedABS/preset measuring holdT.I.R. With high storage RecallPublisher: StarrettDetails: Starrett 2700-802 backlight electronic indicator with 2"/50mm range and .0005"/0.01mm resolution and SPC output. The 2700 backlight indicators are available in 1", 2", and 4 inch range with multiple resolution. The deep backlight colors indicate the tolerances to overcome reading at far distances, in poor lighting conditions, and with inexperienced operators. Software included.UPC: 049659727609EAN: 0049659727609 shopify_US_849711300655 new 789.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41H5CDmNegL_grande.jpg?v=1528152083 Starrett Dimensional Measurement yes 049659727609 0.0 kg Aven MC-XYR-60 XY Rotational Stage, 60 mm Base Diameter https://jumboindustrial.com/products/aven-mc-xyr-60-xy-rotational-stage-60-mm-base-diameter Brand: AvenFeatures: Smooth rotating action for precise positioningNo play, very accurate4.2 mm Travel per knob rotationPublisher: Aven-MirucDetails: These stages feature a spherical design with 360 Degree rotation and XY travel. Almost 30% thinner then conventional rotational and XY travel combinations. These stages are ideal for precision equipment mounting, device mounting tool and optical inspection table. These precision stages are made from an aluminum alloy treated with matte black aluminite.UPC: 766955373162EAN: 0766955373162 shopify_US_849711169583 new 789.80 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/31KgcjR9yLL_grande.jpg?v=1528152083 Aven Dimensional Measurement yes 766955373162 0.0 kg Digi-Pas 2-AXIS HIGH-Precision Digital Inclination Sensor Module, Tilt Angle Sensor, Inclinometer, DWL5500XY 0.0002”/ft (0.02mm/M) NIST-T... https://jumboindustrial.com/products/digi-pas-2-axis-high-precision-digital-inclination-sensor-module-tilt-angle-sensor-inclinometer-dwl5500xy-0-0002-ft-0-02mm-m-nist-traceable Brand: Digi-PasFeatures: 2- AXIS, DIGITAL, IP65-waterproof, 3,000g SHOCK resistance, HIGH PRECISION, RUGGED, durable, small footprint. Easily integrated on machine/equipment structure to real-time monitoring, acquisition and logging surface-plane levelling status, 2-D tilt angles andamp; vibration measurements.Wireless, Plugandamp;Play Control Box and PC Sync Pro Software (Optional) enable users to extract readings or save in Excel without needing time-consuming writing own codes. Alternatively, experienced users may download Digi-Pas Dynamic-Link Library integrating own coding to directly extract readings from sensor module.Thermocompensated MEMS sensors survive andgt;3,000g multiple impact test, fully calibrated for nonlinearity to operate in wide temp. range.: -4 ~158°F.RESOLUTION: 0.0002"/ft" or 5-second (0.02mm/M or 0.001°). Measurement range: 0° ~ ±10° (1-Axis); 0° ~ ±5° (2-Axis). Accuracy: ±0.0002"/ft from 0° to 2°; ±0.0006"/ft at other angles. Response time: 500ms. I/O Comm.: USB, RS232, RS485 andamp; Bluetooth (range andgt;100ft, Ind. class 1).ACCURACY of Patented Digi-Pas Sensor Module is verified by accredited Calibration andamp; Test Laboratories in USA, Japan andamp; Germany traceable to NIST, JIS andamp; DIN. This purchase includes a manufacturer's calibration certificate. For users who needs a NIST-traceable Calibration Certificate with data, please visit our website for reference sample certificates and contact our sales support team.Publisher: Digipas... shopify_US_849711136815 new 790.00 USD in stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/511da-UHKrL_grande.jpg?v=1528152083 Digi-Pas Dimensional Measurement yes 8887726110358 0.0 kg Carl Zeiss Ni2 Automatic Level https://jumboindustrial.com/products/carl-zeiss-ni2-automatic-level Brand: ZeissFeatures: 32X magnification with legendary Zeiss opticsShockproof 4-hinge compensator with setting accuracy of +/- 0.2"Combined course/fine focusing for precise sightingConvenient pentaprism level bubble viewerHorizontal ("endless") tangent knobs on both sides of instrument for ease of operationPublisher: Carl ZeissDetails: German craftsmanship and quality - 32X magnification with legendary Zeiss optics - Shockproof 4-hinge compensator with setting - accuracy of +/- 0.2" - Combined course/fine focusing for precise sighting - Convenient pentaprism level bubble viewer - Horizontal ("endless") tangent knobs on both sides of instrument for ease of operation - Suitable for high-precision leveling of any order - Heavy duty carrying caseUPC: 610256808246EAN: 0610256808246 shopify_US_849817403439 new 499.00 USD out of stock http://cdn.shopify.com/s/files/1/0025/5449/5023/products/41ZPjwzVoEL_grande.jpg?v=1528151856 Zeiss Dimensional Measurement yes 610256808246 0.0 kg